B5-435-TL Super Bright Red LED Lamp T-1 3/4 (5mm PACKAGE DIMENSIONS 1 MAX. 5 ± 0.2 □ 0.5 ANODE 2.54 1.0 MIN. 1.0 ± 0.2 8.6 ± 0.3 5.9 ± 0.3 26.4 MIN. NOTE: 1.All dimensions are in millimeter. 2.Lead spacing is measured where the lead emerge from the package. SELECTION GUIDE Part NO B5-435-TL 18.08.2010 Chip Material AlGaInP Emitted Super Red b5_435_tl.doc Lens Color Water Clear Viewing Angle 15° 1 of 2 ABSOLUTE MAXIMUM RATINGS PARAMETER (Ta = 25°C) SYMBOL MAX. RATING Unit Power Dissipation Pd 80 mW Continuous Forward Current IF 50 mA Pak forward current (10μs IFM 200 mA Pulse) Reverse Voltage VR 5.0 V Operating Temperature Topr -40~+85 Storage Temperature Tstg -40~+85 Lead Soldering Temperature (1.6mm From Case Bottom 260 For 5 SEC) ELECTRO-OPTICAL CHARACTERISTICS TEST SYMBO CONDITION L PARAMETER Forward Voltage Reverse Voltage Luminous Intensity Dominant Wavelength Spectrum Width Of Half Value VF VR IV IF=20mA IR=10uA IF=20mA IF=20mA IF=20mA λD dλ MIN TYP MAX UNIT 2.2 2.6 5 7000 10000 628 20 V V mcd nm nm CHARACTERISTICS DIAGRAMS 40 30 20 10 0 1.2 1.6 2.0 2.4 2.8 3.0 Forward Voltage F (V) -V 18.08.2010 5.0 LUMINOUS INTENSITY Vs. FORWARD CURRENT Forward Current -If(mA) Luminous Intensity Relotive Volue at If=10mA Forward Current-I F (mA) 50 FORWARD CURRENT Vs. FORWARD VOLTAGE 4.0 3.0 2.0 1.0 0 10 20 30 40 50 Forward Current-IF (mA) 50 FORWARD CURRENT DERATING CURVE 40 30 20 10 0 0 20 40 60 Relotive Luminous Intensity Super Bright Red (AlGaInP) 80 100 LUMINOUS INTENSITY Vs. AMBIENT TEMPERATURE 2.0 1.0 0.5 0.2 0.1 0 -30 -10 10 30 50 70 Ambient Temperature -TA(℃ Ambient Temperature -TA(℃) b5_435_tl.doc 2 of 2