DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Applications Product Description The SE5503A is a complete 802.11a/b/g/n WLAN RF front-end module providing all the functionality of the power amplifiers, filtering, power detector, T/R switch, diplexers and associated matching. The SE5503A provides a complete 2.4 GHz and 5 GHz WLAN RF solution from the output of the transceiver to the antenna in an ultra compact form factor. IEEE802.11b DSSS WLAN IEEE802.11g OFDM WLAN IEEE802.11a OFDM WLAN IEEE802.11n WLAN Access Points, PCMCIA, PC cards Features All RF ports matched to 50 Ω Integrated 2.4 GHz PA, 5 GHz PA, TX Filter, T/R switches and diplexers Integrated Power Detector for each TX Chain 21 dBm O/P Power, 802.11b, 11 Mbits, ACPR = 35 dBc 18 dBm @ 3.0 % EVM, 802.11g, 54 Mbits 16 dBm @ 3.0 % EVM, 802.11a, 54 Mbits Single supply voltage: 3.3 V ± 10 % Lead free, Halogen free, RoHS compliant, MSL 3 4mm x 4mm x 1.0mm, LGA Package Designed for ease of use, all RF ports are matched to 50 Ω to simplify PCB layout and the interface to the transceiver RFIC. The SE5503A also includes a transmitter power detector with 20 dB of dynamic range for each transmit chain. Each power amplifier has a separate digital enable control for transmitter on/off control. The power ramp rise/fall time is less than 0.7 μsec. The device also provides a notch filter from 3.2603.267 GHz and 3.28-3.89 GHz prior to the input of each 2.4 GHz and 5 GHz power amplifiers, respectively. The SE5503A packaged in 4mm x 4mm x 1.0mm, Halogen free, Lead free, ROHS compliant, MSL 3 LGA package. Ordering Information Part No. Package Remark SE5503A SE5503A-R SE5503A-EK1 24 pin LGA 24 pin LGA N/A Samples Tape & Reel Evaluation kit Functional Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 1 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Figure 1: SE5503A Functional Block Diagram Figure 2: SE5503A Pin Out (Top View Through Package) Pin Out Description Pin No. Name 1 2 3 4 5 6 7 8 9 10 11 12 ENg GND GND Ant GND CRx CTx GND VCC VCC GND GND Description 2.4 GHz Power Amplifier Enable Ground Ground Antenna Ground Switch Control for RX Path Switch Control for TX Path Ground Supply Voltage Supply Voltage Ground Ground Pin No. Name 13 14 15 16 17 18 19 20 21 22 23 24 Tg GND Rg Ra GND Ta ENa VCC VCC DET GND GND Description 2GHz Transmit RF Input Ground 2GHz Receive RF Output 5GHz Receive RF Output Ground 5GHz Transmit RF Input 5GHz Power Amplifier Enable Supply Voltage Supply Voltage 2/5GHz Power Detector Output Ground Ground Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 2 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Absolute Maximum Ratings These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected workstations. Symbol Definition Min. Max. Unit VCC Supply Voltage -0.3 3.6 V PU ENa, ENg -0.3 3.6 V - 12.0 dBm Operating Temperature Range -10 85 °C TSTG Storage Temperature Range -40 150 °C ESD HBM JEDEC JESD22-A114 all pins - 250 V TXRF TA Ta, Tg, ANT terminated in 6:1 load or better Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit VCC Supply Voltage 3.0 3.3 3.6 V TA Ambient Temperature -10 25 85 °C DC Electrical Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted Symbol Parameter ICC-G Total 802.11g Transmit Supply Current ICC-B ICC-A ICC_OFF Conditions Min. Typ. Max. Unit POUT = 18 dBm, 54 Mbps OFDM signal, 64 QAM ENg = 3.3 V, ENa = 0 V - 150 180 mA Total 802.11b Transmit Supply Current POUT = 21 dBm, 11 Mbps CCK signal, BT = 0.45, ENg = 3.3 V, ENa = 0 V - 190 200 mA Total 802.11a Transmit Supply Current POUT = 16 dBm, 54 Mbps OFDM signal, 64 QAM, ENa = 3.3 V, ENg = 0 V - 220 250 mA Total Supply Current No RF, ENg = ENa = 0 V - 65 200 μA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 3 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Logic Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Unit VENH Logic High Voltage for ENg, ENa (Module On) - 1.8 - VCC V VENL Logic Low Voltage ENg, ENa (Module Off) - 0 - 0.5 V IENH Input Current Logic High Voltage (ENg, ENa) - - 350 400 μA IENL Input Current Logic Low Voltage (ENg, ENa) - - 0.2 - μA Switch Characteristics Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Unit VCTL_ON Control Voltage (On State) - 3.0 - 3.6 V VCTL_OFF Control Voltage (OFF State) - 0.0 - 0.2 V SW ON Low Loss Switch Control Voltage High State = VCTL_ON VCTL_OFF 2.8 - VCC V SW OFF High Loss Switch Control Voltage Low State = VCTL_OFF VCTL_OFF 0 - 0.3 V ICTL_ON Switch Control Bias Current (RF Applied) On pin (CTx, CRx) being driven high. RF Applied - - 100 µA ICTL_ON Switch Control Bias Current (No RF) On pin (CTx, CRx) being driven high. No RF - - 30 µA - - 100 pF Control Input Capacitance CCTL - Switch Control Logic Table CTx CRx Tg, Ta – ANT Rg, Ra – ANT SWON SW OFF ON OFF SW OFF SWON OFF ON SW OFF SW OFF OFF OFF All Other States Unsupported Switch State Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 4 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End 2.4 GHz AC Electrical Characteristics 2.4 GHz Transmit Characteristics Conditions: VCC = 3.3 V, ENg = CTx = 3.3 V, ENa = CRx = 0 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted. Symbol FIN P802.11g Parameter Condition Min. Typ. - 2400 - 2500 MHz 54 Mbps OFDM signal, 64QAM, EVM = 3.0 %, input signal 17.25 18 - dBm - 21 - dBm Frequency Range Output power Max. Unit EVM < 1% P802.11b Output power 11 Mbps CCK signal, BT = 0.45 ACPR(± 11MHz offset) < -35 ACPR(± 22MHz offset) < -56 P1dB P1dB - 24 24.5 - dBm S21 Small Signal Gain - 25 - 30 dB Small Signal Gain Variation Over Band - - 1.0 2.0 dB ΔS21 S211.6 Gain at ½Ref-VCO 1640.00 to 1942.00 MHz - 12 20 dB S213.2 Gain at Ref-VCO 3216.00 to 3312.00 MHz - - 0 dB 2f,3f Harmonics Pout ≤ 21 dBm, 1Mbps, CCK - - -45.2 dBm/MHz tdr, tdf Delay and rise/fall Time 50 % of VEN edge and 90/10 % of final output power level - 0.25 0.4 μs S11 Input Return Loss 8 10 - dB STAB Ru - Stability CW, POUT = 21 dBm 0.1 GHz – 21 GHz Load VSWR = 6:1 Ruggedness Tg = 12dBm, ANT load varies over 6:1 VSWR All non-harmonically related outputs less than -42 dBm/MHz No Irreversible damage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 5 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End 2.4 GHz Receive Characteristics Conditions: VCC = 3.3 V, CRx = 3.3 V, ENg = ENa = CTx = 0 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range - 2400 - 2500 MHz RXIL Insertion Loss - - 1.5 - dB RXRL Return Loss - 10 15 - dB Rx Leakage CTx = SWON, CRx = SWOFF, Device transmitting (TXEN = 3.3 V) 18.0 dBm @ ANT, Power measured @ RX_OUT - - -3 dBm Antenna to Rx isolation Small signal input into ANT, Device not transmitting, Power measured @ RXRF, CTx (Ant to Rx Iso) = SWON, CRx = SWOFF 20 - 33 dB TRISOL-2 ANTRISOL Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 6 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End 5 GHz AC Electrical Characteristics 5 GHz Transmit Characteristics Conditions: VCC = 3.3 V, ENa and CTx = 3.3 V, ENg = CRx = 0 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted. Symbol FIN P802.11a Parameter Frequency Range Nominal Output Power Condition Min. Typ. Max. Unit - 4900 - 5900 MHz 54 Mbps OFDM signal, 64 QAM, EVM = 3.0 %, input 15.0 16.0 - dBm signal EVM < 1% P1dB P1dB - 21 22.5 - dBm S21 Small Signal Gain - 23 - 30 dB Small Signal Gain Variation Over 40 MHz Channel - - 0.5 dB Small Signal Gain Variation Over subbands 4.9 – 5.18 GHz 5.18 – 5.50 GHz 5.50 – 5.90 GHz - 1 3 dB Gain at Ref-VCO 3280 to 3885 MHz - 2 5.5 dB 2f,3f Harmonics @16dBm, 54Mbps, 802.11a 4900 – 5900 MHz - - -48.2 dBm/MHz tdr, tdf Delay and rise/fall Time 50 % of VEN edge and 90/10 % of final output power level - 0.25 0.4 μs S11 Input Return Loss 9 15 - dB ΔS21 S213.2 STAB Ru - Stability 64 QAM, POUT = 16 dBm 0.1 GHz – 21 GHz Load VSWR = 6:1 All non-harmonically related outputs less than -42 dBm/MHz Ruggedness TXa = 12dBm, ANT load varies over 6:1 VSWR No Irreversible damage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 7 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End 5 GHz Receive Characteristics Conditions: VCC = 3.3 V, CRx = 3.3 V, ENg = ENa = CTx = 0 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol Parameter Condition Min. Typ. Max. Unit FOUT Frequency Range - 4900 - 5900 MHz RXIL Insertion Loss - - 1.8 - dB RXRL Return Loss - 10 15 - dB - - -3 dBm 19 - 33 dB TALEAK ATTa Tx Power Leakage Pout = 16 dBm, ENa = 3.3 V, CTx = 3.3 V, CRx = 0 V Antenna to Rx isolation Small signal input into ANT, Device not transmitting, Power measured @ RXRF, CTx (Ant to Rx Iso) = SWON, CRx = SWOFF Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 8 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End 2.4 GHz Power Detector Characteristic Conditions: VCC = ENg = CTx = 3.3 V, ENa = CRx = 0 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 Ω, unless otherwise noted. Symbol Parameter FOUT Frequency Range PDR Power detect range, peak power Condition Min. Typ. - 2400 - 2500 MHz 0 - 22 dBm - 2.3 - KΩ Measured at ANT - Max. Unit PDZOUT DC Output impedance PDVP21 Output Voltage, POUT = 21dBm Measured into 26.5KΩ 0.75 0.85 1.0 V PDVp18 Output Voltage, POUT = 18dBm Measured into 26.5KΩ 0.56 0.63 0.73 V PDVpnoRF Output Voltage, POUT = No RF Measured into 26.5KΩ 0.29 0.31 0.33 V LPF-3dB Power detect low pass filter -3dB corner frequency Measured into 26.5KΩ - 2.0 - MHz 2.5GHz Power Detector Response into 26.5Kohm Load Pdet2400 Pdet2450 Pdet2500 1.2 1.0 Pdet(V) 0.8 0.6 0.4 0.2 0.0 3 5 7 9 11 13 15 17 19 21 23 Pout(dBm) Figure 3: SE5503A Power Detector vs. Output Power over Frequency (CW Signal) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 9 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End 5 GHz Power Detector Characteristic Conditions: VCC = ENa = CTx = 3.3 V, ENg = CRx = 0 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5503A-EV1 evaluation board (de-embedded to device), all unused ports terminated with 50 Ω, unless otherwise noted. Symbol Parameter FOUT Frequency Range PDR Power detect range, peak power Condition Min. Typ. - 4900 - 5900 MHz 0 - 21 dBm - 26.5 - KΩ Measured at ANT - Max. Unit PDZOUT DC Output impedance PDVp18 Output Voltage, POUT = 18dBm Measured into 26.5KΩ 0.6 0.75 0.9 V PDVp16 Output Voltage, POUT = 16dBm Measured into 26.5KΩ 0.5 0.65 0.85 V PDVNoRF Output Voltage, POUT = No RF Measured into 26.5KΩ 0.29 0.31 0.33 V LPF-3dB Power detect low pass filter -3dB corner frequency Measured into 26.5KΩ - 2.0 - MHz 5GHz Power Detector Response into 26.5Kohm Load Pdet4900 Pdet5090 Pdet5280 Pdet5470 Pdet5660 Pdet5850 1.2 1.0 Pdet(V) 0.8 0.6 0.4 0.2 0.0 3 5 7 9 11 13 15 17 19 21 23 Pout(dBm) Figure 4: Preliminary SE5503A Power Detector vs. Output Power over Frequency (CW Signal) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 10 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Package Drawing 24 23 22 21 20 19 19 20 21 22 23 24 1 18 18 1 2 17 17 2 3 16 16 3 4 15 15 4 5 14 14 5 6 13 13 6 7 8 9 10 11 12 12 11 10 9 8 7 TOP SIDE BOTTOM SIDE PIN TABLE PIN NAME PIN NAME Figure 5: Package Drawing: Topside Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 11 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Recommended Land and Solder Patterns Figure 6: Recommended Land and Solder Patterns Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 12 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Package Handling Information Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SE5503A is capable of withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For details on both attachment techniques, precautions, and handling procedures recommended, please refer to: “Land Grid Array Module Solder Reflow & Rework Information”, Document Number QAD-00046. “Handling, Packing, Shipping and Use of Moisture Sensitive LGA”, Document Number QAD-00047. Caution! Class 1A ESD sensitive device Product Branding 5503A Figure 7: SE5503A Branding Information Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 13 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Tape and Reel Information Production quantities of this product are shipped in a standard tape-and-reel format. dimensions and sizing is shown in Table 1and Figure . Parameter Devices Per Reel Reel Diameter Specific tape and reel Value 3000 13 inches Table 1: Tape and Reel Dimensions Figure 8: Detailed Tape and Reel Information (All diminensions in Millimeters) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 14 DATA SHEET SE5503A:Dual Band 802.11a/b/g/n Wireless LAN Front-End Document Change History Revision Date Notes 1.0 Sep-01-2009 Created 1.1 Sep-18-2009 Added Recommended Land Pattern 1.2 Sep-22-2009 Updated recommended land pattern 1.3 Nov-13-2009 Updated ICC, S21, RXIL, RXRL, ICC. 1.4 Dec-1-2009 Updated operating temp, rise-fall time, and 5GHz sub-bands. 1.5 Mar-23-2010 Updated 5GHz harmonic compliance, absolute max operating temp, offstate leakage current 1.6 Oct-27-2010 Updated Package Marking Diagram 1.7 Feb-9-2011 Updated ESD rating Added min/max limits 1.8 Apr-03-2012 Updated with Skyworks logo and disclaimer statement Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202452B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 30, 2012 15