PMC-1001TS S W I T C HI N G T HE S M A R T WAY PMC-1001TS Standard SMD Reed Switch pitch 11.8 mm Electrical Characteristics @ 25 °C Contact form Features A Contact material Small size Ru Contact rating max. Switching voltage max. W / VA 10 VDC 180 VAC 130 Switching current max. A 0.7 Carry current max. A 1 Breakdown voltage min. VDC 200 Contact resistance max. (initial) mΩ 200 Ω 10 9 Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT 10 - 25 Drop out min. AT 4 TC 010 Test equipment tolerance ± AT Suitable for lead-free soldering Suitable for automated assembly Tape & reel packaging Various sensitivity ranges available 2 Operating Characteristics @ 25 °C Hz 500 Resonant frequency typ. Hz 5000 Operate time max. (incl. bounce) ms 0.5 Release time max. ms 0.3 Switching frequency max. Over 1 billion reliable operations at dry circuits or low level loads @ 25 °C Pull in range available Test coil Minimum height above PCB Approvals Environmental Characteristics Operating temperature °C -40 to + 125 Storage temperature °C -40 to +125 Soldering temperature max. °C Vibration (50-2000 Hz) g 20 Shock (1/2 sin 11 ms) g 100 Lead tensile strength min. kg 3 300 Dimensions in mm Ordering Information Packing Unit 5000 pcs Weight per piece 0.06 g Weight per package 800 g C I P © H b m G Reel size 13 inches Standard AT ranges 10 to 15 AT 15 to 20 AT 20 to 25 AT Ordering example PMC-1001TS1520 describes PMC-1001TS with 15 to 20 AT. Position of contact blades not defined. Page 1 of 2 Rev.: 1.5 pmc1001ts_ds_e_1.5 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com PMC-1001TS S W I T C HI N G T HE S M A R T WAY PMC-1001TS Standard SMD Reed Switch pitch 11.8 mm Recommended PCB Layout in mm Soldering Information Mounting Force Recommended Mounting Force Maximum Mounting Force 3N 10 N Tape Dimensions in mm Remarks Tolerance ±0.1 unless otherwise specified When placed onto ferromagnetic parts switching distance of PMC-1001TS may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the SMD Reed Switch. Page 2 of 2 Rev.: 1.5 pmc1001ts_ds_e_1.5 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] www.pic-gmbh.com