HS-324-01-0300 HS-324-01-300 Bipolar Hall Effect Sensor Flatpack Block Diagram Features › Compact size › Adjustable switching point › Various switching points aviable › Customized types aviable open drain output for 3-wire devices Approvals Absolute Maximum Ratings Stresses beyond those listed in the "Absolute Maximum Ratings“ may cause permanent damage to the device. Functional operation of the device at these conditions is not implied. Exposure to the absolute rating conditions for extended periods will affect device reliability. Symbol Parameter VSUP Supply voltage wire colour Min. red - 18 Max. Unit Conditions V t < 1000 h 1) 28 V t < 96 h 1) 32 V t < 5 min 1) 40 V t < 5 x 400 ms 1) with series resistor Rv > 100 Ohm VOUT Output voltage black - 0.5 V t < 1000 h 1) 28 32 V V t < 96 h 1) t < 5 min 1) 40 V t < 5 x 400 ms 1) with series resistor Rv > 100 Ohm IO IOR Output current Reverse output current TJ Junction temperature range A 1) No cumulative stress black black - 50 - - 40 65 mA mA 190 °C t < 96 h 1) All voltages listed are referenced to ground (GND) Dimensions Wire Assignment Name Function Cable color VSUP Supply voltage red OUT Output white GND Ground black * * * other positions on request all wire ends 4mm stripped and tinned Internal buffer capacitor on request Ordering Information HS-324 -01-0300 wire length bipolar Page 1 of 3 Rev. 1.0, 03.08.2015, (006, 009, 008) hs324_01_0300_ds_e_ PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] pic-gmbh.com HS-324-01-0300 HS-324-01-300 Bipolar Hall Effect Sensor Flatpack Characteristics at TJ = - 40° C to + 170°C, VSUP = 3.0 V to 24 V at Recommended Operation Conditions if not otherwise specified in the column “Conditions“. " Typical Characteristics for TJ = 25°C and VSUP = 12 V Symbol Parameter wire colour Min. Typ. Max. Unit Conditions 1.6 2 mA 3 - wire 1 mA for V SUP = - 18 V 0. 4 0. 5 V V Supply ISUP Supply current ISUPhi Reverse current red Port Output black 0.13 Io = 20 mA Io = 25 mA VoI Port low output voltage tf Output fall time 1) 1 µs tf Output rise time 1 µs RL = 820; CL = 20 pF Bnoise Effective noise of magnetic switching points µT For square wave signal with 1 kHz tj Output jitter µs For square wave signal td Delay time1) t samp Output refresh period t en Enable time of output after settling ~60 ±0.58 1) ; V SUP = 12 V; with 1 kHz 16 1.6 2 µs 2.66 50 µs µs VSUP = 12 V B > Bon + 2 mT or B <Bof f - 2 mT of VSUP Power – on – self - test Tstrtno Start of first normaloperation value 36.5 37 t dsamp Recommended Operating Conditions Symbol Parameter wire colour Min. Max. Unit V SUP Supply voltage red 2.7 24 V 3 - wire TJ Junktion temperature range A 1) - 40 170 °C t < 1000h 2) 150 °C t < 2500h 2) 125 °C t < 8000h 2) V OUT Output voltage , 3 - wire white 24 V I OUT Output current, white 25 mA 1) Depends 2) No 3 - wire Conditions on the temperature profile of the application. cumulative stress Page 2 of 3 Rev. 1.0, 03.08.2015, (006, 009, 008) hs324_01_0300_ds_e_ PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] pic-gmbh.com HS-324-01-0300 HS-324-01-300 Bipolar Hall Effect Sensor Flatpack Magnetic Characteristics Overview Symbol Parameter Min. BONth ON threshold range BOOth OFF threshold range ∆Bth Adjustable step size 1) TC Temperatur compensation of Max. Unit - 30 30 mT - 30 30 0.5 - 30 % magnetic thresholds 1) Small Typ. Conditions mT mT 0 30 % ppm/K - 1000 steps at small values, bigger steps at higher values. May not be undercut . Different temperature compensation available on request Magnetic Characteristics On point BON 1) The OFF point BOFF Hysteresis BHYS 1) hysteresis is the difference between the switching points BHYS = BON - BOFF Magnetic Approach Page 3 of 3 Rev. 1.0, 03.08.2015, (006, 009, 008) hs324_01_0300_ds_e_ PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 911 99 59 06-0 Fax +49 911 99 59 06-99 [email protected] pic-gmbh.com