section 9 - Nuvotem Talema

E1/T1/CEPT/ISDN-PRI - T3/E3/D3/STS-1
Interface Transformers for
Telecommunication Products
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: [email protected]
Web Site: www.ntmagnetics.cz
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: [email protected]
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: [email protected]
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: [email protected]
Web Site: www.talemaindia.com
Founded in 1975, The TALEMA International Group has
established itself as a world leader in the manufacture of
toroidal transformers and related magnetic components. Our
strong technical engineering expertise has contributed to the
growth of our current workforce to over 1,200 employees in
manufacturing locations in the Czech Republic and India.
Over the years The Talema Group has succeeded in
designing, producing and delivering in excess of 50 million
transformers to its customers. The recent incorporation of
xDSL technology into our extensive range of Telecom and
LAN magnetics offerings, such as ISDN, 10Base-T, Ethernet
transformers for 100/1000Base-T, has broadened our market
offering to an even higher level.
The TALEMA Group has a total commitment to quality and
employs Lean Six Sigma training for engineering, production
and administrative staff to help achieve a goal of zero defects.
All facilities maintain very stringent Quality Control and Quality
Assurance procedurees and are certified to and manufacture
in accordance with ISO-9001:2000, TS-16949:2002 and
meet a broad range of International Standards including UL,
VDE, IEC, and EN.
Performance has been proven in the many design in’s of
our products. The fact that we maintain a ship-to-stock vendor
rating with over 200 national and international companies
is, to us, the best testimonial of our commitment to quality.
All TALEMA International Group
manufacturing facilities are RoHS
compliant and all chokes, inductors and
HF components are produced in an
Environment Management System (EMS)
facility certified to ISO-14001:2004
Page Nr.
•
IC Selection Guide for Single & Dual Interface Transformers
-
3-4
•
MJM Series - Miniature SMD Dual Interface Transformers - 16 terminals - 0.05” (1.27mm) pitch
-
5-6
•
MJS Series - SMD Dual Interface Transformers - 12 terminals - 0.1” (2.54mm) pitch
-
6-7
•
MJS-A Series - SMD Dual Interface Transformers with CM Choke - 12 terminals - 0.1” (2.54mm) pitch
-
8
•
•
IS2M Series - Single THT Interface Transformers
MJE Series - Single SMD Interface Transformers
-
9
10
•
MGJ Series - Dual Port SMD Transformer Modules with CM Choke on Tx and RX Channels
-
11
•
IC Selection Guide for Quad Port Transformer Modules
-
12
•
MJQ Series - SMD Octal Transformer Modules for Quad Ports - 40 terminals, 0.05” (1.27mm) pitch
-
13 - 14
•
Octal 75/120 Ohm Matching Transformer Module for Quad Ports - 48 terminals, 0.05” (1.27mm) pitch -
15
•
IC Selection Guide for 75 ohm bandwidth applications
-
16
•
DJE Series - SMD Interface Transformers for 75 ohm Bandwith applications
-
17
•
DJM Series - SMD Dual Wideband Interface Transformers
-
18
•
DTM - Six Transfomer Module for Tri-Port applications - 20 terminals, 0.04” (1.02mm) pitch
-
19
-
20 - 22
-
23 - 24
-
25
Tape & Reel Packaging and Dimensions
Visit our web site for detailed electrical and mechanical specifications for Talema’s extensive line of LAN
Magnetic Components for Ethernet & Telecom Applications - www.talema-nuvotem.com
2
Talema manufactures a wide range of transformers for all 1.544 and 2.048Mbbs applications. A full listing of LIU Transceiver
IC’s with recommended Talema transformers is listed on the following cross reference chart.
Performance has been proven in the many design-ins of our products in these applications. Quality and consistency is
guaranteed through 100% testing of the specified parameters for Primary Inductance, Leakage Inductance, Turns Ratio, DC
resistance and Interwinding Capacitance. This ensures that the Return Loss and Pulse Waveshape requirements of ITU-T
G.703 and ANSI T1.102 can be met. Additionally all parts are 100% tested for 1500V minimum isolation.
Products are offered with extended temperature ( -40° to 85°C ) as standard. Required minimum inductance levels are
maintained at the lower temperature limits.
HFC-E1
S 2M
--
--
--
--
MJM-032
6 1 3 18
120 E 1
IS2M-7 / -19
IS2M-15 / -20
-
MJS-018
MJM-018
6 1 3 18
75 E 1
IS2M-17 / -27 IS2M-15 / -20
--
--
61577
T1 & E1
IS2M-7 / -19
IS2M-19
MJS-017A
MJS-017
MJM-017
T1
IS2M-8 / 21
IS2M-21 / -19
MJS-019A
MJS-019
MJM-019
6 1 3 0 4A , 6 13 0 5 A , 61 5 3 5 A , 6 1 5 74 A , 6 15 7 5
(Crystal)
6 1 3 0 4A , 6 13 0 5 A , 61 5 3 5 A , 6 1 5 74 A , 6 15 7 5
75 E 1
IS2M-12
IS2M-7 / -19
MJS-018A
MJS-025
MJM-025
6 1 3 0 4A , 6 13 0 5 A , 61 5 3 5 A , 6 1 5 74 A , 6 15 7 5
120 E 1
IS2M-12
IS2M-7 / -19
MJS-025A
MJS-025
MJM-025
61884
T1/E1/J1
--
--
MJS-017A
--
6 1 5 8 2, 61 5 8 3
IS2M-8 / -21
IS2M-8 / -21
MJS-013A
MJS-013
6 1 3 10 , 61 5 8 1
IS2M-7 / -19
IS2M-15 / -20
MJS-018A
MJS-018
MJM-018
Host
IS2M-7 / -19
IS2M-7 / -19
--
--
MJM-026
IS2M-8 / -21
IS2M-7 / -19
MJS-019A
MJS-019
MJM-019
6 1 5 8 4, 61 5 8 4A
IQ3
IS2M-7 / -19
IS2M-7 / -19
MJS-017A
MJS-017
MJM-017
6 1 5 8 2, 61 5 8 3 , 6 15 8 4 , 6 1 58 4 A
IQ5
6 1 3 10 , 61 5 8 1
6 1 8 8 0, 61 8 8 1
IS2M-8 / -21
IS2M-8 / -21
MJS-013A
MJS-013
MJM-013
IS2M-7 / -19
IS2M-15 / -20
MJS-018A
MJS-018
MJM-018
D S 2 1 5 1, D S 2 15 2 , D S 2 1 5 3 , D S 2 15 4
IS2M-8 / -21
IS2M-15 / -20
MJS-014A
MSJ-019
MJM-019
D S 2 1 5 1, D S 2 15 2 , D S 2 1 5 3 , D S 2 15 4
IS2M-10 / -25
IS2M-15/ -20
MJS-031A
MSJ-028
MJM-028
D S 2 1 9 6 , D S 2 15 5 , D S 2 1 4 9 , D S 2 14 8
(D allas)
D S2148/Q48/Q348/349/Q59
3V
IS2M-7 / -19
IS2M-15 / -20
MJS-018A
MSJ-018
MJM-018
D S2148, Q48
5V
IS2M-10 / -25 IS2M-15 / -20
MJS-031A
MSJ-028
MJM-028
D S21352/Q352, D S21354/Q354
T1/E1
IS2M-7 / -19
IS2M-15 / -20
MJS-018A
MSJ-018
MJM-018
D S21552/Q552, D S21554/Q554
T1/E1
IS2M-8 / -21
IS2M-15 / 20
MJS-014A
MSJ-019
MJM-019
D S21552/Q552, D S21554/Q554
T1/E1
D S 2 6 5 0 2 , D S 2 5 03 , D S 21 4 5 5, D S 2 14 5 8 , D S 2 6 52 8
IS2M-10 / -25 IS2M-15 / -20
IS2M-7
XRT5683A, XRT59L91, XRT5894, XRT5897, XRT5997
XRT5793, XRT5794
XRT81L27, 82L24, 82D 20
IS2M-15
MJS-031A
MSJ-028
MJM-028
MJS-018A
MSJ-018
MJM-018
IS2M-6 / -19
IS2M-6 / -19
MJS-017A
MSJ-017
MJM-017
IS2M-12
IS2M-24 / -20
MJS-046A
MSJ-025
MJM-025
IS2M-25
IS2M-6 / -19
MJS-017A
MSJ-028
MJM-028
IS2M-6 / -19
IS2M-6 / -19
MJS-018A
MSJ-018
MJM-018
XRT86L30, XRT86L32, XRT86L34, XRT86L38
IS2M-6
IS2M-24
MJS-018A
MJS-018
MJM-018
T5684, XRT7288, 82D 20
IS2M-25
IS2M-7 / -19
MJS-028A
MSJ-028
MJM-028
XRT83L30, XRT83L34, XRT83L38
(Siemens)
MJM-013
8 2 V 2 0 4 4, 8 2V 2 04 8 , 8 2 V 2 0 4 8L , 82 V 20 5 4 , 8 2 V 2 0 5 8
IS2M-6
IS2M-6
MJS-017A
MSJ-017
MJM-043
8 2 V 2 0 4 1E , 8 2 V 2 0 4 2E , 8 2 V 2 0 44 E , 8 2 V 2 0 48 E
IS2M-6
IS2M-24
MJS-018A
MSJ-018
MJM-018
8 2 V 2 0 8 1 , 8 2 V 2 0 82 , 8 2 V 20 8 4 , 8 2 V 2 0 8 8
IS2M-6
IS2M-24
MJS-018A
MSJ-018
MJM-018
8 2 P 2 2 8 1 , 8 2 P 2 2 82 , 8 2 P 22 8 4 , 8 2 P 2 2 8 8
IS2M-6
IS2M-24
MJS-018A
MSJ-018
MJM-018
MJM-010
P E B 22 5 4 , P E B 2 2 5 5
E1/T1/J1
--
--
MJS-021A
MSJ-021
P E B 22 5 4 , P E B 2 2 5 5
E1/T1/J1
--
--
MJS-021A
MSJ-021
MJM-021
3.3V
--
--
MJS-032A
--
MJM-022
P E B 22 5 0 4 , P E B 2 2 5 54 , P E B 22 5 6
3
Applicati on
LXT300, LX301
12 Pin Dual SMD
IS2M-7 / -19
IS2M-7 / -19
MJS-017A
MSJ-017
T1/E1
IS2M-7 / -19
IS2M-7 / -19
MJS-017A
MSJ-017
MJM-017
LXT304, LXT305, LXT307
T1
IS2M-8 / -21
IS2M-7 / -19
MJS-019A
MSJ-019
MJM-019
LXT304, LXT305, LXT307
7 5, 12 0 E 1
IS2M-12
IS2M-7 / -19
MJS-018A
MSJ-025
MJM-025
LXT304, LXT305, LXT307
DSX-1, D4
IS2M-11
IS2M-7
MJS-015A
MSJ-016
MJM-016
MJM-018
LXT310, LXT317, LXT318
IS2M-7 / -19
IS2M-15 / -20
MJS-018A
MSJ-018
IS2M-26
IS2M-15 / -20
--
--
--
IS2M-7 / -19
IS2M-7 / -19
MJS-018A
MSJ-018
MJM-018
MJM-016
T1/E1
LXT331, LXT332
IS2M-11
IS2M-7
MJS-015A
MSJ-016
LXT331, LXT332
IS2M-8 / -21
IS2M-7 / -19
MJS-019A
MSJ-019
MJM-019
LXT331, LXT332
IS2M-7 / -19
IS2M-7 / -19
MJS-017A
MSJ-017
MJM-017
LXT334, LXT335
T1/E1
IS2M-7 / -19
IS2M-7 / -19
MJS-017A
MSJ-017
MJM-017
LXT334, LXT335
120/75 E1
IS2M-10 / -25
IS2M-7 / -19
MJS-031A
MSJ-028
MJM-028
LXT334, LXT335
75 E 1
IS2M-12
IS2M-7 / -19
IS2M-16
IS2M-15
LXT336
LXT350, LXT351, LXT359
T1/E1
LXT350, LXT351
LXT350, LXT351
LXT360, LXT361, LXT362, LXT363
IS2M-7
IS2M-20
MJS-046A
MSJ-017
IS2M-7 / -19
IS2M-15 / -20
MJS-018A
MJS-018
MJM-018
IS2M-11
IS2M-7
MJS-019A
MSJ-019
MJM-019
MJM-016
IS2M-11
IS2M-7
MJS-015A
MSJ-016
IS2M-15 / -20
MJS-018A
MJS-018
MJM-018
IS2M-8 / -21
IS2M-7 / 19
MJS-019A
MSJ-019
MJM-019
MSJ-016
MJM-016
MJS-018A
MSJ-018
MJM-018
T1/ E1
LXT3104, LXT3108
IS2M-11
IS2M-7
IS2M-7 / -19
IS2M-15 / -20
IS2M-11
IS2M-7
IS2M-15 / -20
IS2M-15 / -20
IS2M-10 / -25
MSJ-016
MJM-016
MJS-046A
MSJ-017
MJM-017
IS2M-6 / -19
MJS-028A
MSJ-028
MJM-028
MJM-019
LXT3104, LXT3108
T7289A
T7630, T7688, T7690, T7698
T7630, T7688, T7690, T7698
T7693, T7697
MJM-048
CEPT/E1
D S1
IS2M-23 / -21
IS2M-7 / -19
MJS-019A
MSJ-019
C EP T
IS2M-10 / -25
IS2M-10 / -25
MJS-010A
MSJ-010
D S1
IS2M-23 / -21
IS2M-23 / -21
MJS-013A
MSJ-013
C EP T
MJS-024A
D S1
IS2M-23 / -21
IS2M-23 / -21
MJS-013A
MSJ-013
TLIU04C 1
C EP T
IS2M-10 / -25
IS2M-10 / -25
MJS-010A
MSJ-010
PM4341, PM6341, PM4314
PM4318, PM4319, PM4323, PM4325
MJM-013
IS2M-25
IS2M-7 / -19
MJS-028A
MSJ-028
MJM-028
IS2M-7 / -19
IS2M-7 / -19
MJS-017A
MSJ-017
MJM-017
COMET
MJS-024A
MJM-038
BT8510
T1/E1
IS2M-12
IS2M-7
MJS-018A
BT8510
T1/E1
IS2M-12
IS2M-7
MJS-025A
MSJ-025
MJM-025
MJM-031
MJM-019
BT8370, BT8375, BT8376
Low Power
IS2M-8
IS2M-15
MSJ-014A
MSJ-019
BT8370, BT8375, BT8376
Better RI
IS2M-25
IS2M-15
MJS-031A
MSJ-028
MT9071, MT9076
(Mitel)
MJM-013
MJM-038
TLIU04C1
PM4351, PM4354
MJM-024
IS2M-7 / -19
LXT380, LXT381, LXT384, LXT386, LXT388
T7288, T7290A
MJM-025
MJM-026
T1/E1
LXT360, LXT361
LXT380, LXT381, LXT384, LXT386, LXT388
MSJ-025
1 20 E 1
LXT360, LXT361, LXT362, LXT363
(Conexant)
MJM-017
LXT312, LXT313, LXT315
LXT334, LXT335
(Lucent)
16 Pi n Dual SMD
LXT304, LXT305, LXT307
LXT331
(Level One)
Single Through Hole
MSJ-024A
MT9075, MT9076
MT9074, MT9075
MSJ-032A
IS2M-7
IS2M-24
MSJ-018A
MJM-028
MJM-038
MJM-022
MSJ-018
MJM-018
1. Dallas IC’s use either a 1:1.15 or a 1:1.36 ratio transformer depending on the application. Consult the Dallas application notes or contact Talema.
2. Consult Siemens Application Note 12.90 (‘Just a Single Line Transformer Type for all IPAT (PEB2235) Applications’) for calculation of resistor
values.
3. The Dual Transformer types MDM-010 and MDM-021 are electrically identical but have different schematics. Either part may be used with the
PEB2254 and PEB2255.
4. See Level One Application Note 118 (‘Transformer Specifications for Level One Transceiver Applications’) for further details on the choice of
transformer ratios.
4
•
•
•
•
•
•
•
SMD design ideal for pick and place compatability while
providing unrivaled coplanarity
controlled parameters ensure full compliance with
ITU-T G.703 when matched with recommended IC
ideal for all 1.544 and 2.048 Mbs interface applications
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
1500Vrms minimum isolation voltage
extended operating temperature: -40° to +85°C
fully RoHS compliant and meets lead free reflow
level J-STD-020C
Turns Ratio:
= IC side windings
MJM-010
1ct:
1.2
0.41
0.58
16-15-14
1-2-3
1ct:
1.2
0.41
0.58
11-10-9
6-7-8
A
MJM-013
1ct:
1.2
0.39
0.44
1-2-3
16-15-14
1ct:
1.2
0.39
0.44
6-7-8
11-10-9
A
1ct:
MJM-016
1ct:
1.2
0.39
0.77
6-7-8
11-10-9
MJM-017
1ct:
1.2
0.39
0.77
16-15-14
1-2-3
1ct:
MJM-018
1.2
0.39
0.88
16-15-14
1-2-3
A
1ct:
1.2
0.39
0.77
6-7-8
11-10-9
A
1.2
0.39
0.38
16-15-14
1-2-3
1ct:
1.2
0.39
0.77
6-7-8
11-10-9
A
MJM-019
1:
1.2
0.39
0.44
16--14
1-2-3
1ct:
1.2
0.39
0.77
6-7-8
11-10-9
B
MJM-021
1ct:
1.2
0.41
0.58
1-2-3
16-15-14
1ct:
1.2
0.41
0.58
11-10-9
6-7-8
A
1ct:
1.0
0.39
0.39
11-10-9
6-7-8
1ct
1.0
0.41
0.90
1-2-3
16-15-14
A
MJM-023
1:
1.2
0.39
0.39
16-14
1-2-3
1.2
0.39
0.39
6-8
11-10-9
C
MJM-024
1ct:
1.0
0.39
0.39
6-7-8
11-10-9
1.0
0.39
0.66
16-15-14
1-2-3
A
MJM-025
1:
1.2
0.39
0.48
16-14
1-2-3
1.2
0.39
0.77
6-7-8
11-10-9
B
MJM-026
1ct:
1.2
0.39
0.39
16-15-14
1-2-3
1.2
0.39
0.58
6-7-8
11-10-9
A
MJM-027
1:
1.6
0.41
0.83
16-14
1-2-3
1.6
0.41
0.21
6-8
11-9
D
MJM-028
1ct:
1.2
0.39
0.77
16-15-14
1-2-3
1
1.2
0.39
0.52
6-8
11-10-9
E
1.2
0.39
0.94
16-14
1-2-3
1
1.2
0.39
0.94
6-8
11-10-9
C
1.2
0.46
0.26
16-14
1-2, 3-4
1.2
0.46
0.26
11-9
5-6, 7-8
F
1.5
0.41
0.52
1-2-3
16-15-14
1.5
0.41
0.52
11-10--9
6-7-8
A
C
MJM-022
MJM-029
1:
MJM-030
MJM-031
MJM-032
2:
2ct
1:
1:
1ct:
1ct:
1ct:
2:
2:
2ct
1.2
0.39
0.94
16-14
1-2-3
1.2
0.39
0.39
6-8
11-10-9
MJM-033*
1:
1.0
0.41
0.94
16-15-14
1-2-3
0.79:
1.0
0.40
0.75
6-7-8
11-10-9
A
MJM-034
1ct
1.5
0.41
0.62
1-2-3
16-15-14
1ct
1.5
0.41
0.62
6-7-8
11-10-9
A
1.2
0.39
0.39
6-7-8
11-10-9
16-15-14
1.5
0.41
0.82
1-2
MJM-035
MJM-036
MJM-037
1ct:
2cs
1ct:
1.2
0.39
0.52
1-2-3
2cs
1.5
0.41
0.82
5-6
A
G
1.2
0.39
0.39
16-15-14
1-2-3
1ct
1.2
0.39
0.53
6-7-8
11-10-9
A
1ct:
1.2
0.39
0.94
1-2-3
16-15-14
1ct:
1.2
0.39
0.94
6-7-8
11-10-9
A
MJM-039
1:
1.0
0.39
0.94
1-3
16-15-14
1
1.0
0.39
0.39
6-8
11-10-9
H
MJM-040
1ct:
1.2
0.39
0.94
1-2-3
16-15-14
1ct
1.2
0.39
0.94
6-7-8
11-10-9
A
1
1.2
0.39
0.77
1-3
16-15-14
1
1.2
0.39
0.77
11-9
5-6,7-8
J
1.2
0.39
0.53
16-14
1-2-3
1
1.2
0.39
0.77
6-8
11-10-9
C
MJM-038
1ct
1:
MJM-041
MJM-042
1
MJM-043
1ct
1.2
0.39
0.77
1-2-3
16-15-14
1ct
1.2
0.39
0.77
6-7-8
11-10-9
A
MJM-044
1ct
1.2
0.39
0.77
1-2-3
16-15-14
1
1.2
0.39
0.39
6-8
11-9
K
MJM-045
1ct
1.2
0.39
0.77
1-2-3
16-15-14
1.2
0.39
0.95
6-7-8
11-10-9
A
MJM-046
1ct
1.2
0.39
0.39
1-2-3
16-15-14
1.2
0.39
0.39
6-7-8
11-10-9
A
1ct
1ct
MJM-047
1ct
1.2
0.39
0.50
1-2-3
16-15-14
1ct
1.2
0.39
0.50
6-7-8
11-10-9
A
MJM-048
1ct
1.2
0.39
0.39
16-15-14
1-2, 3-4
1ct
1.2
0.39
0.39
11-10-9
5-6, 7-8
G
MJM-049
1ct
1.2
0.39
0.80
2-3-4
16-15, 14-13
1
1.2
0.39
0.80
6-7
12-11, 10-9
L
1.2
0.39
0.39
16-15-14
1-2, 3-4
1ct
1.2
0.39
0.39
11-10-9
5-6, 7-8
G
1.2
0.39
0.94
1-2-3
16-15-14
1ct:1ct
1.2
0.39
0.39
6-7-8
11-10-9
A
MJM-050
MJM-051
1ct
1ct:2.4ct
* MJM-033 Turns Rati o: Pi ns 16-14:1-2 = 1:1.9, Pi ns 16-14:1-3=1:2.4; Pins6-8:9-11=0.79:1.9, Pi ns 6-8:11-10=0.79:1
5
0.028
(0.70)
0.050
(1.27)
0.378 0.346
(9.60) (8.80)
0.394
(10.60)
0.350
(8.89)
0.504
(12.80)
0° - 8°
0.077
(1.96)
0.079
(2.00)
0.236 0.189
(6.00) (4.80)
16
15
4
5
14
11
6
7
10
8
9
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: [email protected]
Web Site: www.ntmagnetics.cz
6
1
3
6
8
1
15
2
3
6
14
11
3
6
14
11
7
10
7
10
8
9
8
9
1
16
1
2
15
2
3
14
11
4
5
10
6
7
9
8
1
16
2
Surface Coplanarity will be 0.004(0.10) maximum
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
2
3
16
2
16
16
1
2
14
11
3
6
10
8
9
0.350
(8.89)
0.016 x 0.016
(0.40 x 0.40)
1
1
3
6
14
11
3
6
8
9
8
1
16
16
15
15
14
11
14
11
3
5
10
6
7
9
9
8
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: [email protected]
16
14
11
9
1
16
2
16
2
15
3
15
14
3
6
14
11
4
6
13
12
11
10
8
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: [email protected]
9
7
9
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: [email protected]
Web Site: www.talemaindia.com
•
•
•
•
•
•
•
SMD design ideal for pick and place compatability
while providing unrivaled coplanarity
common mode choke included on both Tx and Rx
channels for optimum EMI performance
controlled parameters ensure full compliance with
ITU-T G.703 when matched with recommended IC
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
1500Vrms minimum isolation voltage
extended operating temperature: -40° to +85°C
fully RoHS compliant and meets lead free reflow
level J-STD-020C
Turns Ratio:
= IC side windings
MJS-010 1ct:
1.2
1.20
1.40
1-2-3
12-11-10
1ct:
1.2
1.20
1.40
4-5-6
9-8-7
A
MJS-013 1ct:
1.2
1.20
1.40
1-2-3
12-11-10
1ct:
1.2
1.20
1.40
4-5-6
9-8-7
A
MJS-016 1ct:
1.2
1.20
2.10
12-11-10
1-2-3
1ct:
1.2
1.20
2.10
4-5-6
9-8-7
A
MJS-017
1ct:
1.2
1.00
1.70
12-11-10
1-2-3
1ct:
1.2
1.00
1.70
4-5-6
9-8-7
A
MJS-018
1ct:
1.2
1.00
1.00
1-2-3
12-11-10
1ct:
1.2
1.00
1.80
4-5-6
9-8-7
A
1ct:
1.2
1.00
2.00
4-5-6
9-8-7
B
1.2
1.40
1.20
9-8-7
4-5-6
A
1.20
1.20
4-5-6
9-8-7
A
1.2
1.00
1.20
12-10
1-2-3
MJS-021 1ct:
1.2
1.40
1.20
12-11-10
1-2-3
MJS-023 1ct:
1.6
1.20
1.40
12-11-10
1-2-3
1ct:
1.6
MJS-024
1ct:
1.2
1.00
1.00
1-2-3
12-11-10
1ct:
1.2
1.00
1.00
4-5-6
9-8-7
A
MJS-025
1:
1.2
1.00
1.10
12-10
1-2-3
1ct:
1.2
1.00
1.70
4-6
9-8-7
C
2:
D
MJS-019
1:
1ct:
MJS-027
1:
1.6
1.10
1.10
1-3
12-11-10
1.6
1.10
0.70
4-6
9-7
MJS-028
1ct:
1.2
0.70
1.20
12-11-10
1-2-3
1
1.2
0.70
0.90
4-6
9-8-7
E
1ct:
0.7
0.25
0.80
1-2-3
12-10
1:
0.7
0.50
0.40
9-7
4-5-6
G
MSJ-030
1
1.2
0.70
1.20
12-10
1-2-3
1:
1.2
0.70
0.90
4-6
9-8-7
C
MJS-031
1ct:
1.2
0.70
1.20
1-2-3
12-11-10
1.2
0.70
0.70
5-6
8-7
F
MSJ-036
1ct:
1.2
0.70
1.10
12-11-10
1-2-3
1:
1.2
0.70
0.90
4-6
9-8-7
E
MSJ-037
1:
1.5
0.80
1.00
12-10
1-2-3
1:
1.5
0.80
1.00
9-7
4-5-6
G
MSJ-029
0.598 0.472
(15.20) (13.00)
0.500
(12.70)
0.669
(17.00)
0.236 0.189
(6.00) (4.80)
0° - 8°
0.085
(2.15)
0.050
(1.27)
0.020 x 0.12
(0.50 x 0.30)
0.640
(16.25)
0.118
(3.00)
Surface Coplanarity will be 0.004(0.10) maximum
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
0.500
(12.70)
1:
1
12
1
2
11
2
3
4
10
9
3
4
10
9
5
8
5
8
6
7
6
7
12
12
1
2
10
9
3
4
8
6
7
12
1
12
1
12
1
11
2
11
2
11
2
3
4
10
9
3
4
10
9
3
5
10
8
3
4
6
7
6
6
7
1
10
9
5
8
7
12
6
7
7
•
•
•
•
•
•
•
SMD design ideal for pick and place compatability
while providing unrivaled coplanarity
common mode choke included on both Tx and Rx channels
for optimum EMI performance
controlled parameters ensure full compliance with
ITU-TG.703 when matched with recommended IC
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
1500Vrms minimum isolation voltage
extended operating temperature: -40° to +85°C
fully RoHS compliant and meets lead free reflow
level J-STD-020C
Turns Ratio:
MJS-010A
1ct:
1.2
0.60
= IC side windings
30
0.80
1.10
1-3
12-10
1ct:
1.2
0.60
30
0.80
1.10
4-6
1ct:
9-7
MJS-013A
1ct:
1.2
0.60
35
0.80
0.95
1-3
12-10
1.2
0.60
35
0.80
0.95
4-6
9-7
MJS-014A
1ct:
1.2
0.60
35
0.90
1.05
1-3
12-10
1ct:
1.2
0.60
35
0.90
0.90
4-6
9-7
MJS-015A
1ct:
1.2
0.60
25
0.60
1.40
1-3
12-10
1ct:
1.2
0.60
25
0.60
1.20
4-6
9-7
MJS-017A
1ct:
1.2
0.60
25
0.60
1.20
1-3
12-10
1ct:
1.2
0.60
25
0.60
1.20
4-6
9-7
MJS-018A
1ct:
1.2
0.60
35
0.90
0.90
1-3
12-10
1ct:
1.2
0.60
35
0.90
1.80
4-6
9-7
1ct:
9-7
MJS-019A
1ct:
1.2
0.60
35
0.80
0.95
1-3
12-10
1.2
0.60
35
0.80
11.60
4-6
MJS-021A
1ct:
1.2
0.60
30
0.70
1.00
1-3
12-10
1ct:
1.2
0.60
30
0.70
1.00
4-6
9-7
MJS-024A
1ct:
1.2
0.60
25
0.60
1.50
1-3
12-10
1ct:
1.2
0.60
25
0.60
1.50
4-6
9-7
MJS-025A
1 ct
1.2
0.60
30
0.80
1.00
1-3
12-10
1.2
0.60
30
0.80
1.60
4-6
9-7
MJS-028A
1ct:
1.2
0.60
30
0.70
1.20
1-3
12-10
1ct
1.2
0.60
30
0.70
0.90
4-6
9-7
MJS-031A
1ct:
1.2
0.60
35
0.90
0.90
1-3
12-10
1ct:
1.2
0.60
35
0.90
1.20
4-6
9-7
1.2
0.60
35
0.90
2.10
1-3
12-10
1ct:
1.2
0.60
35
0.90
0.90
4-6
9-7
1.2
0.60
35
0.90
0.90
1-3
12-10
1ct:1ct
1.2
0.60
35
0.90
0.90
4-6
9-7
MJS-032A
MJS-046A
1ct:
1ct:1ct
0.598 0.472
(15.20) (13.00)
0.500
(12.70)
0.669
(17.00)
0.236 0.189
(6.00) (4.80)
0° - 8°
0.085
(2.15)
0.050
(1.27)
0.020 x 0.12
(0.50 x 0.30)
Surface Coplanarity will be 0.004(0.10) maximum
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
8
0.640
(16.25)
0.118
(3.00)
0.500
(12.70)
1ct:
1
12
2
11
3
10
4
9
5
8
6
7
•
•
•
•
•
•
•
•
industry standard through-hole footprints
wide range compatible with all common transceiver IC's
controlled parameters ensure full compliance with
ITU-T G.703 when matched with recommended IC
ideal for all 1.544 and 2.048 Mbs interface applications
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
1500Vrms minimum isolation voltage
extended operating temperature: -40° to +85°C
fully RoHS compliant
Turns Ratio:
IS2M-6
1ct:
1.2
0.5
0.7
1:
1.2
1500
= IC side windings
1-3
A
B
1.2
0.5
0.7
1.2
1500
6-4
IS2M-8
1:
1.5
0.6
0.7
0.9
1500
6-4
B
IS2M-10
1:
1.2
0.8
0.5
0.8
1500
1-3
C
IS2M-11
1:
1.2
0.8
0.7
1.4
1500
1-3
C
IS2M-12
1
1.5
0.5
0.7
0.9
1500
6-4
B
1.2
0.5
0.7
0.7
1500
1-3
D
1:
1.2
0.6
0.7
1.0
1500
6-4
B
F
IS2M-7
IS2M-15
1ct:
IS2M-16
IS2M-17
1:
1.2
0.8
0.5
1.0
1500
3-4
IS2M-18
1:
1.2
0.5
0.7
0.8
1500
3-4
F
IS2M-19
1ct:
1.2
1.0
1.0
2.0
1500
6-4
E
1ct:
1.2
1.0
1.0
1.0
1500
1-3
A
1.5
1.2
1.2
1.0
1.0
0.5
1.0
0.7
0.7
1.0
0.8
0.7
1500
1500
1500
6-4
1-3
1-6
B
C
F
1:
1.2
0.8
0.7
0.9
1500
3-4
F
1ct:
1.2
0.8
0.7
2.1
1500
1-3
A
1.2
0.6
0.7
1.0
1500
6-4
B
IS2M-20
IS2M-21
IS2M-23
IS2M-24
1:
1:
1:
IS2M-25
IS2M-26
IS2M-27
1:
.500
(12.70)
.250
(6.35)
3
4
2
5
1
6
.150
(3.81)
1
.350
(8.89)
.200
(5.08)
Line
Line
IC
6
2
6
5
3
4
4
Line
IC
IC
Line
1
IC
6
1
2
3
5
3
4
1
Line
IC
6
2
4
3
0.400
(10.16)
4
3
5
2
6
1
Line
3
IC
4
1
2
6
3
4
5
1
6
Note: Unused pins not provided
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
9
•
low cost SMD for pick and place compatability while providing
consistent and reliable coplanarity
low leakage inductance
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
fully RoHS compliant and meets lead free reflow
level J-STD-020C
•
•
•
Ratings@ 25°C ambient
Minimum isolation voltage: 1500 Vrms
Extended Operating Temperature Range: -40° to +85°C
MJE-10A
1.2
1ct:1.36ct
30
0.200
0.80
1.10
15 00
1-3
MJE-12B
1.2
1:1/1.26
35
0.250
0.80
1.00
15 00
1-3
B
MJE-20A
1.2
1ct:1ct
35
0.200
0.90
0.90
15 00
1-3
A
0.200
(5.08)
0.307
(7.80)
0.100
(2.54)
0° - 8°
0.453 0.374
(11.50) (9.50)
0.492 0.287
(12.50) (7.30)
0.047
(1.20)
1
6
2
5
3
4
A
1
6
5
3
4
0.283 0.244
(7.20) (6.20)
0.020 x 0.12
(0.50 x 0.30)
Surface coplanarity will be 0.004 (0.01) maximum
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: [email protected]
Web Site: www.ntmagnetics.cz
10
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: [email protected]
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: [email protected]
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: [email protected]
Web Site: www.talemaindia.com
•
•
•
•
•
•
•
SMD design ideal for pick and place compatability while
providing unrivaled coplanarity
controlled parameters ensure full compliance with
ITU-T G.703 when matched with recommended IC
ideal for all 1.544 and 2.048 Mbs interface applications
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
1500Vrms minimum isolation voltage
extended operating temperature: -40° to +85°C
fully RoHS compliant and meets lead free reflow
level J-STD-020C
Turns Ratio:
MGJ-100A 1ct:
MGJ-101A
MGJ-102A 1ct
MGJ-103A
MGJ-104A
t
1ct:
t
1ct:
1.2
0.39
0.94
4-6 & 10-12
1.2
0.39
0.77
4-6 & 10-12
1ct:
1.2
0.39
0.44
4-5 & 10-12
1.2
0.39
0.77
4-6 & 10-12
1ct:
1ct:
1ct:
t
= IC side windings
1.2
0.39
0.94
1-3 & 7-9
A
1.2
0.39
0.39
24-22 & 18-16
A
1.2
0.39
0.44
1-3 & 10-12
A
1.2
0.39
0.77
1-3 & 7-9
A
1ct:
1.2
0.39
0.90
4-6 & 10-12
1ct:
1.2
0.39
0.39
24-22 & 18-16
A
MGJ-105A 1ct:
1.2
0.39
0.53
4-6 & 10-12
1ct:
1.2
0.39
0.77
24-22 & 18-16
A
MGJ-106A 1ct:
1.2
0.39
0.53
4-6 & 10-12
1ct:
1.2
0.39
0.39
24-22 & 18-16
A
MGJ-107A 1ct:
1.2
0.39
0.44
4-6 & 10-12
1ct:
1.2
0.39
0.77
1-3 & 7-9
A
MGJ-108B
1ct:
1.2
0.39
0.39
21-19 & 18-16
B
1.2
0.39
0.58
21-19 & 18-16
B
1.2
0.39
0.77
21-19 & 18-16
B
1ct:
1.2
0.39
0.94
1-3 & 10-12
MGJ-109B 1ct:
1.2
0.39
0.58
1-3 & 10-12
MGJ-110B
1.2
0.39
0.77
1-3 & 10-12
1ct:
1ct:
1ct:
0.689
(17.50)
0.630 0.551
(16,00) (14,00)
11 x
0.05(1,27)
0.228
(5,80)
0.550
(13.97)
0.069
(1.765)
0° - 8°
0.661
(16.80) 0.091
(2.30)
.020 x .012
(0.50 x
0.30)
0.030
(0.77)
0.550
(13.97)
1
24
1
24
2
23
2
23
3
22
3
22
4
21
4
21
5
20
5
20
6
19
6
19
7
18
7
18
8
17
8
17
9
16
9
16
10
15
10
15
11
14
11
14
12
13
12
13
Surface Coplanarity will be 0.004(0.10) maximum
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
11
(C rystal)
(D allas )
(Si emens)
(Level One)
(Mitel)
BT8510
C N8380
BT8370, BT8375, BT8376
BT8370, BT8375, BT8376
6 1 3 18
61577
61304A/5A/535A/547A/75
61304A/5A/535A/547A/75
61304A/5A/535A/547A/75
6 1 5 8 2, 6 15 8 3
6 1 3 10 , 6 15 8 1
61881
6 1 5 8 4, 6 15 8 4 A
6 1 5 8 4, 6 15 8 2 , 6 1 5 8 3, 6 15 8 3 A
D S 2196
D S 2 1 5 1 , D S 2 1 5 2 , D S 2 1 5 3, D S 2 1 54
D S 2 1 5 1 , D S 2 1 5 2 , D S 2 1 5 3, D S 2 1 54
D S2148, D S21Q48
D S2148, D S21Q48
D S21352, D S21Q352, D S21354, D S21Q354
D S21552, D S21Q552, D S21554, D S21Q554
D S21552, D S21Q552, D S21554, D S21Q554
T5683A, 59L91, T5894, T5897, T5997
T5791, T5993, T5994, T5995
T5684, T7288, 81L27, 82L24, 82D 20
8 3 L 3 0 , 8 3 L 34 , 8 3 L 3 8
P E B 2 25 4 , P E B 2 25 5
P E B 22 5 0 4 , P E B 22 5 5 4
P E B 2 25 0 4
P E B 22 5 6
LXT300, LXT301
LXT304, LXT305, LXT307
LXT304, LXT305, LXT307
LXT304, LXT305, LXT307
LXT310, LXT317, LXT318
LXT331
LXT331, LXT332
LXT331, LXT332
LXT334, LXT335
LXT334, LXT335
LXT334, LXT335
LXT336
LXT350, LXT351, LXT359
LXT350, LXT351
LXT360, LXT361, LXT362, LXT363
LXT360, LXT361, LXT362, LXT363
LXT380/381/384/386/388
LXT380/381/384/386/388
LXT3104, LXT3108
T7288, T7290A
T7289A
T7688, T7690, T7698
T7688, T7690, T7698
T7693, T7697
TLIU04C 1
TLIU04C 1
MT9071, MT9076
MT9075, MT9076
MT9074, MT9075
PM4341, PM6341, PM4314
PM4318
PM4351, PM4354
T1/E1
Better RI
Low Power
120 E 1
T1/E1
T1
75 E 1
120 E 1
IQ3
IQ5
3V
5V
-
E1/T1/J1
3.3V
5V
3.3V E1/T1/J1
E1/T1
T1
75E 1, 120E 1
E1/T1
E1/T1
120/75 E1
75 E 1
E1/T1
T1 / E1
T1 / E1
T1 / E1
CE PT
D S1
CE PT
D S1
CE PT
D S1
CE PT
C omet
1:1/1.26
1:2C T
1:1.36C T
1:1.15
1:2C T
1:2C T
1:1.15
1:2C T
1:1/1.26
1:1.14
1:2C T
1:1.15
1:2C T
1:1.14
1:2C T
1:1.15
1:1.36C T
1:2C T
1:1.36C T
1:2C T
1:1.15
1:1.36C T
1:2C T
1:1/1.26
1:1.36C T
1:2C T
1C T:1.41
1:2.4
1:1.5
1:2.4
1:2C T
1:2C T
1:1.15
1:1/1.26
1:2C T
1:2C T
1:2C T
1:1.15
1:2C T
1:1.36CT
1:1/1.26
1:2C T
1:2C T
1:1.15
1:2C T
1:1.15
1:2C T
1:2C T
1:2C T
1:1.36CT
1:1.15
1:1.36
1:1.14
1:2.42
1:1.14
1:1.36
1:2.42
1:2.4
1:2C T
1:1.36CT
1:2C T
1:2.42
1:2CT
1CT:2
1:2CT
1:2CT
1:1CT
1:2CT
1:2CT
1:1CT
1:2CT
1:1.14CT
1:1CT
1:2CT
1:2CT
1:1.14C T
1:1CT
1:2CT
1:2CT
1:1CT
1:2CT
1:1CT
1:2CT
1:2CT
1:2CT
1:2CT
1:2CT
1:2CT
1CT:1.41
1:1
1.41:1
1:1
1:2CT
1:2CT
1:2CT
1:2CT
1:1CT
1:1CT
1:2CT
1:2CT
1:2CT
1:2CT
1:2CT
1:2CT
1:1CT
1:2CT
1:1CT
1:2CT
1:1CT
1CT:2
1:1CT
1:2CT
1:2CT
1:1.36C T
1:1.14C T
1:2.42
1:1.14C T
1:1.36C T
1:2.42
1:1
1:1CT
1:2CT
1:2CT
1:2.42
MJQ-007-40
MJQ-020-40
MJQ-001-40
MJQ-002-40
MJQ-003-40
MJQ-006-40
MJQ-002-40
MJQ-003-40
MJQ-007-40
MJQ-009-40
MJQ-003-40
MJQ-002-40
MJQ-006-40
MJQ-009-40
MJQ-003-40
MJQ-002-40
MJS-001-40
MJQ-003-40
MJQ-001-40
MJQ-003-40
MJQ-002-40
MJQ-001-40
MJQ-006-40
MJQ-007-40
MJQ-001-40
MJQ-006-40
MJQ-016-40
MJQ-022-40
MJQ-026-40
MJQ-022-40
MJQ-006-40
MJQ-006-40
MJQ-002-40
MJQ-007-40
MJQ-003-40
MJQ-003-40
MJQ-006-40
MJQ-002-40
MJQ-006-40
MJQ-001-40
MJQ-007-40
MJQ-006-40
MJQ-003-40
MJQ-002-40
MJQ-003-40
MJQ-002-40
MJQ-003-40
MJQ-020-40
MJQ-003-40
MJQ-001-40
MJQ-002-40
MJQ-012-40
MJQ-009-40
MJQ-028-40
MJQ-009-40
MJQ-012-40
MJQ-028-40
MJQ-022-40
MJQ-003-40
MJQ-001-40
MJQ-006-40
MJQ-028-40
1. Dallas IC’s use either a 1:1,15 or a 1:1.36 ratio transformer depending on the application. Consult the Dallas application notes or contact Talema.
2. P/N MJQ-007-J - To obtain a 1:1 secondary ratio connect the following secondary contacts: 40-39, 35-34, 30-29 and 25-24;
a secondary ratio of 1:1.26 is obtained by connecting contacts: 40-38, 35-33, 30-28 and 25-23.
12
•
•
•
•
•
•
•
•
designed for optimum compatability with all established
interface IC’s - see listing on last page
module contains eight transformers for Quad T1/E1 Ports
SMD design provides consistent and reliable
coplanarity - fully pick and place compatable
controlled parameters ensure full compliance with
ITU-T G.703 when matched with recommended IC
ideal for all 1.544 and 2.048 Mbs interface applications
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
1500Vrms minimum isolation voltage
extended operating temperature: -40° to +85°C
•
fully RoHS compliant and meets lead free reflow level
J-STD-020C
Turns Ratio:
MJQ-001-40
MJQ-002-40
MJQ-003-40
MJQ-006-40
MJQ-007-40
MJQ-009-40
MJQ-012-40
MJQ-015-40
MJQ-016-40
MJQ-017-40
MJQ-020-40
MJQ-021-40
MJQ-022-40
MJQ-023-40
MJQ-024-40
MJQ-026-40
MJQ-028-40
MJQ-029-40
MJQ-030-40
MJQ-031-40
Transmi t
1.2
0.6
35
3 90
5 50
24-25, 29-30, 34-35, 39-40
16-18, 11-13, 6-8, 1-3
1:
1.2
0.6
35
3 90
7 80
4-5, 9-10, 14-15, 19-20
36-38, 31-33, 26-28, 21-23
Transmi t
1:
1.2
0.6
35
3 90
45 0
1-2, 6-7, 11-12, 16-17
39-40, 34-35, 29-30, 24-25
Receive
1:
1.2
0.6
35
3 90
7 80
21-23, 26-28, 31-33, 36-38
18-20, 13-15, 8-10, 3-5
Transmi t
1:
1.2
0.6
35
3 90
7 80
1-2, 6-7, 11-12, 16-17
38-40, 33-35, 28-30, 23-25
Receive
1:
1.2
0.6
35
3 90
3 90
21-22, 26-27, 31-32, 36-37
18-20, 13-15, 8-10, 3-5
Transmi t
1:
1.2
0.6
35
3 90
7 80
4-5, 9-10, 14-15, 19-20
36-38, 31-33, 26-28, 21-23
Receive
1:
1.2
0.6
35
3 90
7 80
24-25, 29-30, 34-35, 39-40
16-18, 11-13, 6-8, 1-3
Receive
Transmi t
Receive
Transmi t
Receive
Transmi t
Receive
1:
= IC side windings
1:
1.2
0.6
35
3 90
49 0
1-2, 6-7, 11-12, 16-17
38-40, 33-35, 28-30, 23-25
1:
1.2
0.6
35
3 90
7 80
21-22, 26-27, 31-32, 36-37
18-20, 13-15, 8-10, 3-5
1:
1.2
0.6
35
3 90
4 40
1-2, 6-7, 11-12, 16-17
39-40. 34-35, 29-30, 24-25
1.2
0.6
35
3 90
4 40
36-38, 31-33, 26-28, 21-23
3-5, 8-10, 13-15, 18-20
1.2
0.4
20
3 90
5 40
1-2, 6-7, 11-12, 16-17
39-40. 34-35, 29-30, 24-25
1.2
0.5
20
3 90
5 40
36-38, 31-33, 26-28, 21-23
3-5, 8-10, 13-15, 18-20
1:
1:
1:
Transmi t
1:
1.2
0.6
35
3 90
45 0
1-3, 6-8, 11-13, 16-18
38-40, 33-35, 28-30, 23-25
Receive
1:
1.2
0.6
35
3 90
45 0
4-5, 9-10, 14-15, 19-20
36-37, 31-32, 26-27, 21-22
Transmi t
1CT:
1.2
0.6
35
42 0
5 80
1-3, 6-8, 11-13, 16-18
39-40, 34-35, 29-30, 24-25
Receive
1CT:
1.2
0.6
35
42 0
5 80
21-23, 26-28, 31-33, 36-38
19-20, 14-15, 9-10, 4-5
Transmi t
1:
1.2
0.6
35
3 90
7 80
1-3, 6-8, 11-13, 16-18
38-40, 33-35, 28-30, 23-25
Receive
1:
1.2
0.6
35
3 90
7 80
4-5, 9-10, 14-15, 19-20
36-37, 31-32, 26-27, 21-22
Transmi t
1:
1.2
0.6
35
3 90
7 80
4-5, 9-10, 14-15, 19-20
36-38, 31-33, 26-28, 21-23
Receive
1CT:
1.2
0.6
35
3 90
7 80
1-3, 6-8, 11-13, 16-18
39-40, 34-35, 29-30, 24-25
1:
1.2
0.6
35
3 90
7 80
1-2, 9-10, 11-12, 19-20
39-40, 31-32, 29-30, 21-22
Receive
1:
1.2
0.6
35
3 90
7 80
23-25, 26-28, 33-35, 36-38
16-18, 13-15, 6-8, 3-5
Transmi t
1:
1.0
0.5
35
3 90
3 90
1-2, 8-9, 11-12, 18-19
39-40, 32-33, 29-30, 22-23
1.0
0.5
35
4 10
9 00
24-25, 27-28, 34-35, 37-38
16-17, 13-14, 6-7, 3-4
Transmi t
Receive
1:
1.2
0.8
35
3 90
6 70
1-2, 6-7, 11-12, 16-17
39-40. 34-35, 29-30, 24-25
Receive
1:
1.2
0.6
35
3 90
5 40
21-23, 26-28, 31-33, 36-38
18-20, 13-15, 8-10, 3-5
Transmi t
1:
1.2
0.6
35
3 90
5 40
24-25, 29-30, 34-35, 39-40
16-18, 11-13, 6-8, 1-3
1.2
0.6
35
3 90
3 90
4-5, 9-10, 14-15, 19-20
36-38, 31-33, 26-28, 21-23
Transmi t
Receive
1:
1
Transmi t
1:
1.0
0.5
35
3 90
5 80
1-2, 8-9, 11-12, 18-19
39-40, 32-33, 29-30, 22-23
Receive
1.41:
1.0
0.5
35
3 90
3 90
24-25, 27-28, 34-35, 37-38
16-17, 13-14, 6-7, 3-4
Transmi t
1:
1.2
06
35
3 90
9 40
1-3, 6-8, 11-13, 16-18
38-40, 33-35, 28-30, 23-25
Receive
1:
1.2
0.6
35
3 90
9 40
4-5, 9-10, 14-15, 19-20
36-37, 31-32, 26-27, 21-22
Transmi t
1:
1.2
0.6
35
3 90
810
1-2, 6-7, 11-12, 16-17
38-40, 33-35, 28-30, 23-25
Receive
1:
0.6
0.6
35
2 80
5 90
21-22, 26-27, 31-32, 36-37
18-20, 13-15, 8-10, 3-5
Transmi t
1:
1.2
0.6
35
3 90
9 60
1-2, 6-7, 11-12, 16-17
38-40, 33-35, 28-30, 23-25
Receive
1:
0.6
0.6
35
2 80
6 90
21-22, 26-27, 31-32, 36-37
18-20, 13-15, 8-10, 3-5
Transmi t
1:
1.0
1.0
35
4 10
9 00
1-2, 9-10, 11-12, 19-20
38-40, 33-31, 30-28, 23-21
Receive
1:
1.0
1.0
35
3 90
3 90
37-36, 35-34, 27-26, 25-24
3-5, 6-8, 13-15, 16-18
C
A
B
C
B
A
A
E
C
E
C
D
F
A
C
F
E
B
B
G
13
19 x 0.050
(19 x 1,27)
0.030
(0,77)
0.091
(2,30)
0.661 0.480
(16,80) (12,20)
0.950
(24,13)
Surface coplanarity will be <0.004 (0.10)
Weight: ~5 grams
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
1
40
1
40
39
1
38
37
3
4
40
1
40
1
40
1
40
1
40
39
39
38
2
3
39
38
3
4
38
37
2
3
39
38
2
3
38
37
2
2
3
39
38
4
5
6
37
4
36
35
5
6
36
35
34
5
6
7
36
35
5
6
7
36
35
5
6
36
35
4
6
37
35
5
6
7
36
35
7
8
9
34
33
7
8
9
33
32
8
9
34
33
32
8
9
33
32
8
9
33
32
7
8
34
33
8
9
34
33
32
10
11
31
30
10
11
31
30
10
11
31
30
10
11
31
30
10
11
31
30
9
11
32
30
10
11
31
30
29
12
12
13
29
28
12
13
28
27
13
14
29
28
12
13
29
28
13
14
28
27
12
13
29
28
28
27
27
14
12
13
14
26
25
15
16
26
25
15
16
17
26
25
15
16
26
25
14
16
27
25
15
16
17
26
25
2
3
4
14
14
4
29
15
16
26
25
15
16
17
18
19
24
17
24
23
17
18
19
23
22
18
19
24
23
22
18
19
23
22
18
19
23
22
17
18
24
23
18
19
24
23
22
20
21
20
21
20
21
20
21
20
21
19
22
20
21
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: [email protected]
Web Site: www.ntmagnetics.cz
14
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: [email protected]
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: [email protected]
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: [email protected]
Web Site: www.talemaindia.com
•
•
•
•
•
•
•
module contains eight transformers for Quad T1/E1 Ports
SMD design provides consistent and reliable
coplanarity - fully pick and place compatable
controlled parameters ensure full compliance with
ITU-T G.703 when matched with recommended IC
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
1500Vrms minimum isolation voltage
extended operating temperature: -40° to +85°C
fully RoHS compliant and meets lead free reflow
level J-STD-020C
Turns Ratio:
TX - 120/75 Ohm
2 0 36 2
Chi p : Li ne
(1:3) : (48-47)/(48-46), (7-9) : (42-41)/(42-40)
1 : 1.9/2.4
(13-15) : (36-35)/(36-34), (19-21) : (30-29)/(30-28)
Line : Chip
RX - 120 Ohm
1 : 1.9
RX - 75 Ohm
= IC side windings
1.0
0.8
50
0.9
(45-43) : (4-6), (39-37) : (10-12)
1.4
(33-31) : (16-18), (27-25) : (22-24)
Line : Chip
(45-44) : (4-6), (39-38) : (10-12)
1 : 2.4
(33-32) : (16-18), (27-26) : (22-24)
Chip
0.831 0.752
(21.10) (19.10)
23 x 0.050
(23 x 1,27)
Tx
0.030
(0,77)
48
2
47
3
4
46
45
Rx
0.076
(1.93)
0.020
(0.50)
46 x 0.05 (1.27)
0.110
(2.80)
0.870 0.650
(22.10) (16.50)
Tx
1.254
(31.85)
44
6
7
8
43
42
41
9
10
40
39
38
12
13
14
37
36
35
15
16
34
33
Rx
0.305
(7.75)
0.258
(6.55)
1.150
(29.21)
Tx
Rx
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
Weight: ~ 8 grams
32
18
19
Surface coplanarity will be <0.004 (0.10)
Tx
Line
1
20
31
30
29
21
22
28
27
26
24
25
Rx
15
Talema manufactures a wide range of transmit and receive
transformers for T3/DS3 applications using bit rates of 44.736
Mbps. These transformers can also be used with E3 interfaces
at 34.368 Mbps and STS-1 applications at 51.84 Mbps. A
listing of IC’s with recommended Talema transformers is listed
on the following cross reference chart.
Quality and consistency is guaranteed through 100% testing
of the specified parameters for Primary Inductance, Leakage
Inductance, Turns Ratio, DC resistance and Interwinding
Capacitance. This ensures that the Return Loss and Pulse
Waveshape requirements of CCITT G.703 and ATT T.A.34 can
be met. Additionally all parts are 100% tested for 1500V
minimum isolation.
All TALEMA International Group
manufacturing facilities are RoHS
compliant and chokes, inductors and HF
components are produced in an EMS
facility certified to ISO-14001:2004.
Products are offered with extended temperature ( -40° to 85°C
) as standard. Required minimum inductance levels are maintained at the lower temperature limits.
(Rockwell)
(Si emens)
Dallas)
(Conexant)
16
CN8331, CN8332, C N8333
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
--
--
--
--
DJE-40-6E
DJE-100-6A
--
--
T7296
DJE-40-6A
--
D JE-100-6A
--
--
--
XRT75xxx
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
DTM-100
XRT73L00 / 2 / 3 / 4 / 6 / 12
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
DTM-100
XRT73LC03A / 04A, R12
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
DTM-100
XRT7300, XRT7302
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
DTM-100
--
P E B 3452, P E B 3460
D S 3 1 8 1/ 2 / 3 / 4
DJE-19-6B
D JE-19-6B
DJE-40-6D
DJE-40-6D
--
D S 3150 / 1 / 2 / 3 / 4
DJE-19-6B
D JE-19-6B
DJE-40-6D
DJE-40-6D
--
--
CN28331, CN28332, CN28333
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
DTM-100
M28335, M28356
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
DTM-100
M28352, M28353, M28354
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
DTM-100
7 8P 2 2 41 B
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
78 P 2 2 42 , 7 8 P 2 2 4 3 , 7 8 P 2 2 4 4
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
78 P 7 2 0 0, 7 8 P 7 2 0 0 L
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
78 P 7 2 0 3L , 7 8 P 7 2 0 4 L
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
78 P 2 3 6 1, 7 8 P 2 3 6 2
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
MRT TXC-02050, E1
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
ART TXC -02020
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
--
ARTE TXC -02021
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
--
DART TXC-2030, DS3
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
--
DART TXC-2030, E3
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
DS3LIM-SN TXC-20153G
DJE-40-6A
D JE-40-6A
D JE-100-6A
DJE-100-6A
DJM-100B
--
E3LIM TXC-20163
DJE-19-6B
D JE-40-6A
DJE-40-6D
DJE-100-6A
DJM-100C/D
--
•
•
•
•
low cost SMD for pick and place compatability while providing
consistent and reliable coplanarity
low leakage inductance
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
fully RoHS compliant and meets lead free reflow
level J-STD-020C
Ratings@ 25°C ambient
Minimum isolation voltage: 1500 Vrms
Extended Operating Temperature Range: -40° to +85°C
Inductance measured @ 1MHz, 10mV
Interwinding Capacitance @ 100kHz/10mV
Leakage Inductance @ 100kHz/10mV
DJE-19-6B
19
--
1:2CT
0.06
10
0.250
500
1500
1-3
B
DJE-40-6A
40
--
1:1
0.10
10
0.200
3 40
1500
1-3
A
DJE-40-6B
40
20
1:2CT
0.11
12
.250
500
1500
1-3
B
DJE-40-6D
40
20
1:2CT
0.11
12
.250
500
1500
4-6
D
DJE-40-6E
40
20
1CT:1CT
0.10
10
.250
3 40
1500
1-3
E
DJE-45-6D
40
20
1:1.155CT
0.15
12
.200
3 40
1500
4-6
D
DJE-100-6A
100
40
1:1
0.11
10
.200
3 40
1500
1-3
A
0.100
(2.54)
0° - 8°
0.307
(7.80)
0.283 0.244
(7.20) (6.20)
3
0.200
(5.08)
0.453 0.374
(11.50) (9.50)
0.492 0.287
(12.50) (7.30)
Surface coplanarity will be 0.004 (0.01) maximum
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: [email protected]
3
4
4
3
6
1
5
0.047
(1.20)
1
6
4
6
0.020 x 0.12
(0.50 x 0.30)
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: [email protected]
Web Site: www.ntmagnetics.cz
4
1
6
3
4
3
2
5
2
1
6
1
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: [email protected]
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: [email protected]
Web Site: www.talemaindia.com
17
These miniature modules contain both transmit and receive
transformers designed for use in in T3/DS3 applications using
bit rates off 44.736Mbps, E3 interfaces at 34.368Mbps and
STS-1 applications at 51.84 Mbps The transformers are typical
for 75 ohm bandwidth applications requiring a very fast rise
times.
•
low cost SMD for pick and place compatability while providing
consistent and reliable coplanarity
low leakage inductance
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
fully RoHS compliant and meets lead free reflow
level J-STD-020C
•
•
•
Ratings@ 25°C ambient
Minimum isolation voltage: 1500 Vrms
Extended Operating Temperature Range: -40° to +85°C
D JM-100A
1:1
1:1
40
40
0.10
0.10
10
10
15 0 0
1-2
7-8
A
D JM-100B
1ct:1ct
1:1
1 00
10 0
0.11
0.11
10
10
15 0 0
6-8
16-15
B
D JM-100C
1:2ct
1:1
40
10 0
0.11
0.11
12
10
15 0 0
16-14
6-8
C
D JM-100D
1:2ct
1:1
1 00
10 0
0.12
0.11
12
10
15 0 0
7-8
16-15
D
D JM-100E
1:2ct
1:2ct
40
40
0.11
0.11
12
12
15 0 0
16-14
11-9
E
0.028
(0.70)
0.050
(1.27)
0.378 0.346
(9.60) (8.80)
1
16
1
2
15
2
15
3
14
7
10
6
11
6
11
7
10
8
9
8
9
8
9
16
0.394
(10.60)
0.236 0.189
(6.00) (4.80)
0.350
(8.89)
0.504
(12.80)
2
0° - 8°
0.077
(1.96)
0.079
(2.00)
16
1
0.350
(8.89)
0.016 x 0.016
(0.40 x 0.40)
Surface coplanarity will be 0.004 (0.01) maximum
1
16
1
16
2
2
15
3
14
7
11
6
11
10
7
9
8
8
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
18
9
These modules contain both transmit and receive transformers
designed for use in in T3/DS3 applications using bit rates off
44.736Mbps, E3 interfaces at 34.368Mbps and STS-1
applications at 51.84 Mbps The transformers are typical for 75
ohm bandwidth applications requiring a very fast rise times.
•
•
•
•
low cost SMD for pick and place compatability while providing
consistent and reliable coplanarity
low leakage inductance
manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
fully RoHS compliant and meets lead free reflow
level J-STD-020C
Ratings@ 25°C ambient
Minimum isolation voltage: 1500 Vrms
Extended Operating Temperature Range: -40° to +85°C
D TM-100
1:1
10 0
40
0.537
(13.64)
0.583 0.571
(14.80) (14.50)
0.11
0.040
(1.02)
TALEMA IN
WK / YR
Part Nrumber
0.622
(15.80)
0.091
(2.30)
11 x 0.04(1.02)
0.440
(11.18)
0.052
(1.31)
0.240 0.201
(6.10) (5.10)
24 x 0.012 x 0.012
(0.30 x 0.30)
Surface coplanarity will be 0.004 (0.01) maximum
0.442
(11.22)
0.026
(0.66)
12
1 5 00
1-2, 3-4, 5-6, 7-8, 9-10, 11-12
1
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
9
16
10
15
11
14
12
13
19
• EMI noise suppression for data and signal line filtering
• Miniature, low cost SMD common mode chokes are designed
for pick and place compatability while providing reliable
coplanarity
• High attenuation over a wide frequency range
• Manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
• Other inductance values available
• fully RoHS compliant and meets lead free reflow
level J-STD-020C
Nominal Voltage: 42Vac (50/60Hz), 80Vdc
Operating temperature: -40° to +85°C
Storage temperature: -40° to +125°C
Climatic category: according to IEC68-1 25/85/56
Test voltage between windings: 500 Vrms
Test frequency: Inductance measured @ 100kHz / 20 mVrms
Test Equipment: HP4192A
CTJ-2-110
11
300
160
1
2
A
C F J -4 - 3 3 0
33
55 0
65
1
4
A
CTJ-2-101
100
300
180
1
2
A
C F J -4 - 4 7 0
47
540
80
1
4
A
CTJ-2-471
470
200
3 80
1
2
A
C F J -4 - 1 0 1
100
36 0
16 0
1
4
A
CTJ-2-102
1000
150
6 60
1
2
A
C F J -4 - 4 7 1
470
360
65
1
4
A
CTJ-2-472
470 0
15 0
18 00
1
2
A
C F J -4 - 1 0 2
100 0
30 0
85
1
4
A
CLJ/CMJ-2-110
11
500
120
1
2
A
C F J -4 - 4 7 2
47 00
220
430
1
4
A
CLJ/CMJ-2-470
CLJ/CMJ-2-101
CLJ/CMJ-2-471
47
100
470
500
500
500
150
2 60
2 50
1
1
1
2
2
2
A
A
A
C C J -4 -2 6 0
C C J - 4 -4 7 0
C C J -4 -1 0 1
26
47
100
60 0
500
400
65
100
13 0
1
1
1
4
4
4
B
B
B
B
CLJ/CMJ-2-102
1000
500
2 50
1
2
A
C C J -4 -2 2 1
220
400
19 0
1
4
CLJ/CMJ-2-472
470 0
200
845
1
2
A
C C J -4 -4 7 1
470
400
12 0
1
4
B
CLJ/CMJ-2-103
10000
200
1200
1
2
A
C C J - 4 -1 0 2
1000
350
190
1
4
B
CLJ/CMJ-2-473
47000
10 0
3450
1
2
A
C C J -4 -1 5 2
150 0
35 0
12 0
1
4
B
CCJ-2-102
1000
550
140
1
2
A
C C J - 4 -5 0 2
5000
330
220
1
4
B
CCJ-2-152
1500
550
100
1
2
A
C C J -4 -1 2 3
12000
170
790
1
4
B
CCJ-2-502
5 000
500
180
1
2
A
C C J - 4 -5 8 3
58 000
90
23 50
1
4
B
CCJ-2-123
12 000
400
2 80
1
2
A
CCJ-2-283
2800 0
270
5 20
1
2
A
C QJ - 1 . 0 - B
1000
400
200
1
4
B
CCJ-2-503
5000 0
200
10 20
1
2
A
C QJ - 5 . 0 - B
5000
30 0
450
1
4
B
CCJ-2-703
7000 0
170
15 40
1
2
A
C QJ - 1 0 - B
10000
300
1060
1
4
B
CDJ-1.0-A
1000
600
190
1
2
A
C QJ - 5 8 - B
58 000
20 0
2 400
1
4
B
CDJ-4.7-A
4700
350
5 75
1
2
A
C QJ-90 -B
90 000
150
4150
1
4
B
CDJ-12-A
12 000
300
6 80
1
2
A
CUJ-240-16E
24
80 0
45
2
2
E
CDJ-28-A
2800 0
300
1020
1
2
A
CUJ-101-16E
100
450
135
2
2
E
CDJ-50-A
5000 0
300
18 00
1
2
A
CUJ-102-16E
100 0
450
13 5
2
2
E
CDJ-70-A
7000 0
300
2150
1
2
A
CUJ-472-16E
47 00
300
310
2
2
E
CFJ-3-240
24
1000
45
1
3
A
C UJ-24 0-1 6C
24
65 0
45
2
3
C
CFJ-3-102
1000
700
70
1
3
A
C UJ-10 1-1 6C
100
350
110
2
3
C
CFJ-3-222
2200
600
125
1
3
A
C UJ-10 2-1 6C
100 0
33 0
17 0
2
3
C
CFJ-3-472
4700
350
3 40
1
3
A
C UJ-47 2-1 6C
4 700
200
430
3
2
D
CLJ/CMJ-4-110
11
600
130
1
4
A
C UJ-24 0-1 6A
24
55 0
45
2
4
A
CLJ/CMJ-4-470
47
500
180
1
4
A
C UJ-10 1-1 6A
100
250
240
2
4
A
CLJ/CMJ-4-101
100
500
3 30
1
4
A
C UJ-47 1-1 6A
470
25 0
95
2
4
A
CLJ/CMJ-4-471
470
500
2 40
1
4
A
C UJ-47 2-1 6A
47 00
160
605
2
4
A
CLJ/CMJ-4-102
1000
500
310
1
4
A
CLJ/CMJ-4-472
4700
300
8 60
1
4
A
C OJ - 1 6 - 4 7 0
47
300
200
8
2
--
CLJ/CMJ-4-123
12 000
13 0
2300
1
4
A
C OJ - 1 6 - 5 0 2
5000
150
1900
8
2
--
20
Dimensions: Inches (Millimeters)
Surface Coplanarity will be 0.004 (0.10) maximum
Tolerance: ±0.010 (0.25) unless specified otherwise
0.200
(5.08)
0.031
(0.80)
0.069
(1.75)
0.130
(3.30)
0.307
(7.80)
0.083
0.130 (2.10)
(3.30)
1
4
2
3
0.100
(2.54)
0.283 0.244
(7.20) (6.20)
0.050
(1.27)
0.020 x 0.12
(0.50 x 0.30)
0.492 0.287
(12.50) (7.30)
0.236
(6.00)
0° - 8°
0.050
(1.27)
0.453 0.374
(11.50) (9.50)
0.020 x 0.12
(0.50 x 0.30)
1
6
2
5
3
4
0.300
(7.62)
0.453 0.374
(11.50) (9.50)
0.100
(2.54)
0.394
(10.00) 0.213
(5.40)
0.039
(1.00)
1
4
3 x 0.100
(3 x 2.54)
2
3
0.378
(9.60)
0.213
(5.40)
0.283 0.244
(7.20) (6.20)
0.100
(2.54)
0.185 0.146
(4.70) (3.70)
0.047
(1.20)
0.492 0.287
(12.50) (7.30)
0° - 8°
0.350 0.287
(8.90) (7.30)
0.047
(1.20)
0° - 8°
0.197 0.177
(5.00) (4.50)
0.020 x 0.12
(0.50 x 0.30)
1
8
2
7
3
6
4
5
0.020 x 0.012
(0.50 x 0.30)
8
0.300
(7.62)
0.551 0.472
(14.00) (12.00)
0.350 0.287
(8.90) (7.30)
3 x 0.050
(3 x 1.27)
5
0.394
(10.00) 0.197
(5.00)
0.213
(5.40)
0.189 0.150
(4.80) (3.80)
0.028
(0.70)
1
8
2
7
3
6
4
5
1
4
0.300
(7.62)
0.433
(11.00)
3 x 0.050
(3 x 1.27)
0.016 x 0.016
(0.40 x 0.40)
0.590
(15.00) 0.102
(2.60)
0.100
(2.54)
0° - 8°
0.354 0.315
(9.00) (8.00)
1
8
4
5
0.020 x 0.12
(0.50 x 0.30)
0.354 0.299
(9.00) (7.60)
0.394
(10.00) 0.213
(5.40)
0.228
(5.80)
0° - 8°
0.100
(2.54)
0.209 0.169
(5.30) (4.30)
0.039
(1.00)
1
4
2
3
0.100
(2.54)
10
9
7
0.209 0.169
(5.30) (4.30)
0.020 x 0.12
(0.50 x 0.30)
8
2
7
3
6
4
5
6
0.400
(10.16)
0.020 x 0.012
(0.50 x 0.30)
0.047
(1.20)
0.709
(18.00)
0.228
(5.80)
0° - 8°
3 x 0.050
(3 x 1.27)
1
0.654 0.591
(16.60) (15.00)
0.354 0.299
(9.00) (7.60)
0.394
(10.00) 0.213
(5.40)
3 x 0.050
(3 x 1.27)
0.031
(0.80)
1
8
2
7
3
6
4
5
1 2 0.200 4 5 0.100
(2.54)
(5.08)
0.400
(10.16)
0.520
(13.20)
0.413
0.461
(10.50)
(11.70)
0.098
(2.50)
0° - 8°
1
5
0.020
(0.50)
0.047
(1.20)
0.200
(5.08)
10
6
1
10
2
9
4
7
5
6
21
Dimensions: Inches (Millimeters)
Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004 (0.10) maximum
0.504
(12.80)
0.236 0.189
(6.00) (4.80)
0.394
(10.60)
0° - 8°
0.350
(8.89)
0.077
(1.96)
1
2
3
4
5
6
7
8
0.031
(0.80)
0.050
(1.27)
0.378 0.346
(9.60) (8.80)
0.079
(2.00)
0.350
(8.89)
0.016 x 0.016
(0.40 x 0.40)
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
19 x 0.050
(19 x 1,27)
16
15
14
13
12
11
10
9
0.030
(0,77)
0.661 0.480
(16,80) (12,20)
0.091
(2,30)
1
40
2
39
3
38
5
36
6
35
7
34
8
33
10
31
11
30
12
29
13
28
15
26
16
25
17
24
18
23
20
21
0.950
(24,13)
• Low profile (6.0mm) and light weight (4.0 g), Talema
common mode choke modules provide excellent EMI
reduction in Quad Port T1/E1 applications
• High density board placement with modular design
• SMD package facilitates pick and place compatability
while ensuring consistent and reliable coplanarity
• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility
• fully RoHS compliant and meets lead free reflow
level J-STD-020C
Ratings@ 25°C ambient
Test voltage between windings: 500 Vrms
Operating Temperature Range: 40°C to +85°C
Storage Temperature: -40°C to +125°C
Test Frequency: Inductance measured @ 100kHz/20mVrms
The Talema 16 data line common mode choke module has been
designed for T1/E1 applications and provides excellent EMI
suppression for data and signal line filtering
Standard packing in tape and reel
Weight: 4 grams
COJ-16-470
16
47
200
Dimensions and Schematic as noted above
22
13
27
40
44
42
36
26
15
+0.1
T±0.05
B0±0.10
P±0.10
S0±0.10
D1
A
F±0.10
W±0.30
E±0.10
D0-0.0
P2±0.10 P0±0.10
A0±0.10
A
K0±0.10
MJS
32.00
14.20
1.75
2.00
4.00
Ø1.50 Ø2.00 20.00
15.60
17.40 28.40
0.40
6.40
330x32
600
5/3000
MGJ
32.00
14.20
1.75
2.00
4.00
Ø1.50 Ø2.00 24.00
16.40
17.90 28.40
0.40
5.80
330x32
400
5/2000
MJQ
44.00
20.20
1.75
2.00
4.00
Ø1.50 Ø2.00 24.00
16.75
28.40 40.40
0.40
6.70
330x44
400
5/2000
203 62
44.00
20.20
1.75
2.00
4.00
Ø1.50 Ø2.00 20.00
15.30
28.20 40.40
0.40
6.60
330x44
300
5/1500
822 19
32.00
14.20
1.75
2.00
4.00
Ø1.50 Ø2.00 20.00
15.60
17.40 28.40
0.40
6.40
330x32
600
5/3000
COJ
44.00
20.20
1.75
2.00
4.00
Ø1.50 Ø2.00 24.00
16.75
28.40 40.40
0.40
6.70
330x44
400
5/2000
P0±0.10
-0.0
T±0.05
A
B0±0.10
F±0.10
E±0.10
W±0.30
D1+0.1
D0
P2±0.05
A
P±0.10
A0±0.10
K0±0.10
MJM
24.00
11.50
1.75
2.00
4.00
Ø1.5
Ø1.50 16.00
10.20
13.35
0.35
6.55
330x24
600
5/3000
MJE
24.00
11.50
1.75
2.00
4.00
Ø1.5
Ø1.50 20.00
11.90
8.20
0.40
7.60
330x24
600
5/3000
DJE
24.00
11.50
1.75
2.00
4.00
Ø1.5
Ø1.50 20.00
11.90
8.20
0.40
7.60
330x24
600
5/3000
DJM
24.00
11.50
1.75
2.00
4.00
Ø1.5
Ø1.50 16.00
10.20
13.35
0.35
6.55
330x24
600
5/3000
DTM
24.00
11.50
1.75
2.00
4.00
Ø1.5
Ø1.50 20.00
15.20
14.05
0.40
6.50
330x24
400
5/2000
·
23
C
A
N
Reel Dimensions (Unit : mm)
B
24
20.2
10 0
3 30 x 3 2
33 0
32
20.2
10 0
3 30 x 4 4
33 0
44
20.2
10 0
Blank
Min. 160mm
TALEMA IN
TALEMA
IN
M/Y
Wk/Yr
MMJ- 100B-501
Part Number
33 0
TALEMA IN IN
TALEMA
M/Y
Wk/Yr
MMJ- 100B-501
Part
Number
3 30 x 2 4
START
TALEMA
TALEMA IN IN
M/Y
Wk/Yr
MMJ- 100B-501
Part
Number
END
Components
Blank
Min. 400mm
Drawing direction
335
355
5
35
50
33
0
285
·
24
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 841 00 - 0
Fax: Int. + 49 89 841 00 25
Email: [email protected]
H. J. MERCK & Co. GmbH
Hasenhöhe 128
22587 Hamburg
Tel: Int. + 49 40 87 08 63-0
Fax: Int. + 49 40 87 08 63-33
E-mail: [email protected]
BERND BIELER
Industrievertretung
Max-Eyth-Straße 1
72379 Hechingen
Tel: Int. + 49 7471 1804-0
Fax: Int. + 49 7471 1804-10
E-mail: [email protected]
TORTECH PTY. LTD.
POB 194
North Strathfield,
Sydney, N.S.W. 2137
Tel: Int. + 61 2 9642 6003
Fax: Int. + 61 2 9642 6127
E-Mail: [email protected]
Web Site: www.tortech.com.au
ISATRONICK B.V.B.A.
Doolhoflaan 17
B-2640 Mortsel
Tel: Int. + 32 3 448 1976
Fax: Int. + 32 3 448 1195
E-Mail: [email protected]
Web Site: www.isatronick.be
NORDTEK DANMARK
Horsensvej 134
DK-8300 Odder
Tel: Int. + 45 86 554 344
Fax: Int. + 45 86 554 644
E-Mail: [email protected]
Web Site: www.nordtek.dk
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 841 00 - 0
Fax: Int. + 49 89 841 00 25
Email: [email protected]
TECHNOLASA ELETTRONICA
Via Macello, 65/B
I-39100 Bolzano
Tel: Int. + 39 0471 305 400
Fax: Int. + 39 0471 305 444
E-Mail: [email protected]
Schillerstr. 41
80336 München
Tel:
Int.+49 89 558 75-0
Fax:
Int.+49 89 558 75-421
E-Mail: [email protected]
Web: www.buerklin.com
Daimlerstraße 26
40789 Monheim
Tel:
Int.+49 2173 9505
Fax:
Int.+49 2173 950999
Web: www.schukat.com
Hoherweg 245
40231 Düsselforf
Tel:
Int.+49 211 9067-0
Fax:
Int.+49 211 9067-125
E-Mail: [email protected]
Web: www.buerklin.com
NT MAGNETICS s.r.o.
Chebská 27
322 00 Plzeñ
Tel: Int. + 420 377 - 338 351
Fax: Int. + 420 377 - 338 350
Email: [email protected]
Web Site: www.ntmagnetics.cz
E.S.I.A
5-7 Place Marcel Rebuffat
Courtaboeuf 7 Villejust
91971 Courtaboeuf Cedex
Tel: Int. + 33 1 6931 4410
Fax: Int. + 33 1 6931 4425
E-Mail: [email protected]
Web Site: www.esia.fr
OTTO RATING S.A.
Castellnou, 31-33
08017 Barcelona
Tel: Int.+34 93 252 2708
Fax: Int.+34 93 205 6264
E-mail: [email protected]
Web Site: www.rating.es
BTB COMPONENTS AG
Im Chlösterli 4
CH-8902 Urdorf
Tel: Int. + 41 44 734 4888
Fax: Int. + 41 44 734 4892
E-mail: [email protected]
21, Via Caldera
Centro Direzionale S.Siro
20153 Milano
Tel:
Int.+39 02 40951 1
Fax:
Int.+39 02 40951 224
E-Mail: [email protected]
Web: www.rutronik.com
Industriestraße 2
75228 Ispringen/Pforzheim
Tel:
Int.+49 7231 801-0
Fax:
Int.+49 7231 82282
E-Mail: [email protected]
Web: www.rutronik.com
TALEMA ELEKTRONIK GMBH
Sembdnerstr. 5, Postfach 2523
82110 Germering
Tel: Int. + 49 89 - 841 00 - 0
Fax: Int. + 49 89 - 841 00 25
Email: [email protected]
DELTA COMPONENTS LTD.
The Courtyard
Seven Acres, Smallfield Road
Horne, Surrey RH6 9JP
Tel: Int. + 44 1342 844 555
Fax: Int. + 44 1342 844 552
[email protected]
www.deltacomponents.com
ALFAMAG ELECTRONICS LLC
945 Parkwood
PO Box 668
Rolla, Missouri 65402
Tel: Int.+573 364 2422
Fax: Int.+573 364 5390
E-Mail: [email protected]
Web Site: www.alfamag.com
AMVECO MAGNETICS, INC.
11222 Richmond Ave., Suite 120
Houston, TX 77042
E-Mail: [email protected]
Web Site: www.amveco.com
Hölzliwisenstraße 5
CH-8604 Volketswil
Tel: Int.+41 44 947 3737
Fax: Int.+41 44 947 3747
E-Mail: [email protected]
Birchington Road
Corby
Northants, NN17 9RS
Tel: Int.+44 8457 201201
Fax: Int.+44 845 850 9911
www.rs-components.com
NUVOTEM TEO.
Crolly
Co. Donegal
Tel: Int. + 353 74 - 954 8666
Fax: Int. + 353 74 - 954 8139
Email: [email protected]
TALEMA ELECTRONIC PVT. LTD.
Opposite the SIDCO Industrial Estate
Gins Towers
4/5S.H/1, Omalur Main Road
Salem - 636 004, Tamil Nadu
Tel: Int. + 91 427 - 244 1325
Fax: Int. + 91 427 - 243 0034
E-mail: [email protected]
Web Site: www.talemaindia.com
10-07