Common Mode Interface Chokes • Interface Signal Transformers and Modules • SO, E1/T1/PRI/CEPT, U, xDSL Interface Transformers • nt magnetics nuvotem U Interface Transformers for Communications and Data Line Technology Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications SECTION 10 Components for ISDN and LAN • U Interface Transformers for Communications and Data Line Technology TALEMA PROFILE Founded in 1975, The TALEMA International Group has established itself as a world leader in the manufacture of toroidal transformers and related magnetic components. Our strong technical engineering expertise has contributed to the growth of our current workforce to over 1,200 employees in manufacturing locations in the Czech Republic and India. Over the years The Talema Group has succeeded in designing, producing and delivering in excess of 50 million transformers to its customers. The recent incorporation of xDSL technology into our extensive range of Telecom and LAN magnetics offerings, such as ISDN, 10Base-T, Ethernet transformers for 100/1000Base-T, has broadened our market offering to an even higher level. QUALITY The TALEMA Group has a total commitment to quality and employs Lean Six Sigma training for engineering, production and administrative staff to help achieve a goal of zero defects. All facilities maintain very stringent Quality Control and Quality Assurance procedurees and are certified to and manufacture in accordance with ISO9001:2000, TS-16949:2002 and meet a broad range of International Standards including UL, VDE, IEC, and EN. ENVIRONMENT All TALEMA International Group manufacturing facilities are RoHS compliant and all chokes, inductors and HF components are produced in an Environment Management System (EMS) facility certified to ISO-14001:2004. CONTENTS Telecom Products UKO Interface Page Nr. • THT & SMD Interface Transformers - IC Selection Guide - 3 • EPU Series - EP13 Interface Transformers in SMD & THT Styles - 4 • ISU Series - RM6, RM8 & PT23, THT & SMD Style Interface Transformers - 5-6 • UKF, UKV & UKH Series - THT Interface Transformers in Flat and Vertical Mount Packages - 7 • UKJ Series - SMD Interface Transformers in Flat Package - 8 UPO Interface • IC Selection Guide for AMD, Infineon & National Semiconductor - THT & SMD Interface Transformers - 9 • THT Transformers in Flat & Vertical Packages matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 - 10 • THT Transformer in Flat Package complying with Reinforced Insulation Level EN60950 & UL1950 and matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chip sets - 11 • SMD Transformers in Flat Package matched to Infineon’s PEB20950 & PEB20951 and Nationals TP34 & TP3406 - 12 • SMD Interface Transformers complying with Reinforced Insulation Level EN60950 & UL1950 and matched to Infineon’s PSB2196 & PSB2197 chip sets - 13 • UMJ Series - SMD Transformers in Flat Package matched to AMD, Infineon and National Semiconductor chip sets - 14 • UAJ - Dual SMD Interface Transformer Module matched to Infineon’s PEB2096, PEB2196 & PSB2197 chip sets - 15 • UAJ Series - SMD Interface Modules combining a transformer and a common mode choke for EMI noise reduction - matched to AMD, Infineon and National’s chip sets - 16 • UMF & UMV Series - THT Interface Module in Flat & Vertical Packages combining a transformer and a common mode choke for EMI noise reduction - matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chip sets - 17 - 18 Common Mode EMI Noise Suppression Chokes • Quick Reference Guide to Common Mode Interface Chokes - 19 Tape & Reel Packaging - 20 - 21 Talema Manufacturing Locations and Authorized Sales Representatives - 23 Visit our web site for detailed electrical and mechanical specifications for Talema’s extensive line of magnetic components for LAN, Ethernet & Telecom Applications - http://www.talema-nuvotem.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 2 Sep-06 IC Chipsets - UKO Interface Transformer Selecton Guide Talema has designed a cost effective range of U Interface transformers for 2B1Q and 4B3T applications for equipment transmission between customer premises and exchanges. The transformers meet all requirements of recognized U Interface IC’s and ANSI standard T1.601 with a highly reliable pulse shape and return loss performance. ISDN IC - UKO Interface Transformer Cross Reference Guide IC Part Number IC Mfg. MTC-20277/20279 MTC202/20277/20279 Turns Ratio (Line: Chip) Coding RM6 - TH RM6 - SMD RM8 - TH EPU 2.00:1.25 4B 3T -- -- ISU-220C -- 1.60:1 4B 3T -- ISU-180B & ISU-180G ISU-180C EPU-200B Talema Part Number Alcatel MTC202/20276/20278 2.00:1 2B 1Q ISU-170A ISU-170A1 UK UKJ-400 EPU-400B ISU-170B & ISU-170G ISU-170C EPU500E EPU-700E UKJ-420 Legerity AM20902 1.32:1 4B 3T ISU-100A ISU-100B & ISU-100G ISU-100C EPU-120B (AMD) Motorola National 1.60:1 2B 1Q ISU-110A ISU-110B & ISU-110G ISU-110C -- T7234/7237/7256/7264/ 1.50:1 2B 1Q -- -- ISU-230C -- T7262 2.50:1 2B 1Q -- -- ISU-120C -- MC145572/145576 1.25:1 2B 1Q -- ISU-140B & ISU-140G ISU-140C EPU-300B & D TP34 2.00:1 2B 1Q -- -- -- EPU-400B TP34/3410/3411 1.50:1 2B 1Q -- ISU-150B & ISU-150G ISU-150C -- PEB2491/8090/8091/8191 2.50:1 2B 1Q ISU-210A -- -- EPU-110B 1.60:1 2B 1Q ISU-110A ISU-110B & ISU-110G ISU-110C EPU-100B 2:00:1 2B 1Q ISU-170B & ISU-170G ISU-170C EPU-500E PEB2091/24902/24911 PSB21911 PEB8091/8191 PEF80912/80913/81912 PEF81913/82912/82913 ISU-170A ISU-170A1 PEB2090/24901/24902 UKF-100 UKJ-430 UKJ-420 4B 3T ISU-100A ISU-100B & ISU-100G PEF80902/81902/82902 1.60:1 4B 3T ISU-190A -- PEF80902/81902/82902 2.00:1.25 4B 3T -- -- PEB80902/81902 UKJ-440 EPU-700E 1.32:1 PEB8090/80900 UKJ-430 EPU-400B Infineon ISU-100C EPU-120B UKF-120 UKV-220 UKJ-400 ISU-220C -- UKV-210 EPU-200B 1.80:1 4B 3T ISU-190A ISU-190B & ISU-190G -- ST5411/5412 1.50:1 2B 1Q -- ISU-150B & ISU-150G ISU-150C -- ST5411/5412 2.00:1 2B 1Q -- -- -- EPU-400B ST2071 1.32:1 4B 1Q ISU-100A ISU-100B & ISU-100G ISU-100C EPU-120B UKV-220 2:1 Biphase -- --- -- -- UKF-110 PEF80902/81902/82902 S TM UKV-220 UKH-320 AM2091 L u cen t UKF-120 EPU-600E UKF-120 (Thomson) UKJ-420 Zarlink MT8971/8971B/8172/8172B THE TALEMA GROUP • Magnetic Components for Universal Applications 3 EPU Series - UKO Interface Transformers Features • compatibility with common transceiver IC’s ensures maximum loop length • complies with ANSI standard T1.601 when used with recommended chip • all materials approved to UL94V-0 • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40°C to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings EPU Series - UKO Interface Transformers Part Number Lo ± 8% mH Turns Ratio ± 2% Line : IC IDC mA DCR Line Ohms Nom. DCR IC Ohms Nom. LL Line Side μH Max. CC pF Nom. VP (Vrms) Schematic EPU-100A 16.0 1.65 : 1 60 8.4 5.2 80 45 2000 A EPU-100B 16.0 1.65 : 1 60 8.4 5.2 80 45 2000 B EPU-110B 14.5 1.25 : 1 60 8.2 6.7 70 50 2000 B EPU-120A 7.9 1.32 : 1 60 5.3 4.1 60 45 2000 A EPU-120B 7.9 1.32 : 1 60 5.3 4.1 60 45 2000 B EPU-200A 6.15 1.6 : 1 60 3.6 2.3 40 40 2000 A EPU-200B 6.15 1.6 : 1 60 3.6 2.3 40 40 2000 B EPU-300B 28.0 1.25 : 1 60 19.5 16.0 150 60 2000 B EPU-300D 28.0 1.25 : 1 60 19.5 16.0 150 60 2000 D EPU-400B 16.0 2.00 : 1 60 8.4 4.3 80 50 2000 B EPU-400C 16.0 2.00 : 1 60 8.4 4.3 80 50 2000 C EPU-500E 14.5 1:1:1 60 8.4 4.3 80 80 2000 E EPU-600E 7.5 0.9 : 0.9 : 1 60 5.4 3.0 90 45 2000 E EPU-700E 14.5 1:1:1 60 8.6 3.2 80 60 2000 E EPU-100A - EPU-600E EPU-700E 0.547 (13.60) 0.531 (13.90) TALEMA IN Part Number Date Code 0.100 (2.54) TALEMA IN Part Number Date Code 0.531 (13.50) max. 0.394 (10.0) 0.394 (10.0) • • 0.709 (18.00) 0.028 (0.71) 0.516 (13.11) max 0.098(2.50) Ø 0.024 (0.60) 0.098 (2.50) 0.394 (10.00) 0.524 (13.30) max. 0.051 (1.30) 0.492 (12.50) max. 0.675 (17.15) max. 0.173 (4.40) Schematics 0.394 (10.00) A 1 Line C B IC 9 1 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) 2 4 7 2 4 Weight: 6.8 grams 5 6 5 Line IC 6 10 Line D IC Line E IC 1 10 9 7 2 9 7 6 3 6 1 10 7 9 7 2 4 9 6 5 Line IC Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com 4 1 5 ISU Series - UKO Interface Transformers Features • compatibility with common transceiver IC's ensures maximum loop length • complies with ANSI standard T1.601 when used with recommended chip • 2000 Vrms minimum isolation • industry standard footprints are available in four DIL and SMD package options • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings ISU Series - UKO Interface Transformers Part Number Turns Ratio (mH) LP IDC (mA) RCUP (Ohms) RCUS (Ohms) (Vrms) VP ISU-100A 1.32:1.32:1: 1 7.1 - 8.7 60 5.4 4.1 2000 RM6 - THT 1 ISU-100B 1.32:1.32:1: 1 7.1 - 8.7 60 5.4 4.1 2000 RM6-SMD-"B" 1 ISU-100C 0.66:0.66:: 1 7.1 - 8.7 60 2.3 1.8 2000 RM8 - THT 2 ISU-100G 1.32:1.32:1: 1 7.1 - 8.7 60 5.4 4.1 2000 RM6-SMD-"G" 1 ISU-110A 1.6:1.6:1: 1 13.0 - 16.0 60 6.4 5.9 2000 RM6 - THT 1 ISU-110B 1.6:1.6:1: 1 13.0 - 16.0 60 5.8 5.9 2000 RM6-SMD-"B" 1 ISU-110C 0.8:0.8:1 13.0 - 16.0 60 3.8 2.5 2000 RM8 - THT 2 ISU-110G 1.6:1.6:1: 1 13.0 - 16.0 60 6.4 5.9 2000 RM6-SMD-"G" 1 ISU-120C 2.50:1 14.5 - 18.0 60 5.0 2.2 2000 RM8 - THT 2 ISU-130D 2.00:1 25.5 - 28.5 60 11.6 6.4 2000 PT23 - THT 4 ISU-130C 2.00:1 25.5 - 28.5 60 7.9 3.3 2000 RM8 - THT 3 ISU-140B 1.25:1.25:1: 1 26.5 - 29.7 60 11.2 9.1 2000 RM6-SMD-"B" 1 ISU-140E 1.25:1 26.5 - 29.7 80 12.0 7.0 2000 PT23 - THT 4 3 P ackag e Schematic ISU-140C 1.25:1.25: : 1/1 26.5 - 29.7 80 6.0 4.0 2000 RM8 - THT ISU-140G 1.25:1.25:1: 1 26.5 - 29.7 60 11.2 9.1 2000 RM6-SMD-"G" 1 ISU-150B 1.5:1.5:1: 1 25.5 - 28.5 60 11.5 7.6 2000 RM6-SMD-"B" 1 ISU-150D 1.50:1 25.5 - 28.5 60 20.0 3.0 2000 PT23 - THT 5 4 ISU-150C 0.75: 0.75: 1 25.5 - 28.5 60 18.0 7.5 2000 RM8 - THT ISU-150G 1.5:1.5:1: 1 25.5 - 28.5 60 11.5 7.6 2000 RM6-SMD-"G" 1 ISU-160D 1.50:1 14.2 - 16.0 60 16.0 2.5 2000 PT23 - THT 5 ISU-160C 1.50: 1 14.2 - 16.0 60 5.0 3.4 2000 RM8 - THT 2 ISU-170A 1:1:1 13.0 - 16.0 60 5.2 3.3 2000 RM6 - THT 3 ISU-170A1 1:1:1 13.0 - 16.0 60 6.5 3.3 2000 RM6 - THT 5 ISU-170B 2:2:1: 1 13.0 - 16.0 60 10.4 5.2 2000 RM6-SMD-"B" 1 ISU-170C 1:1:1 13.0 - 16.0 60 3.8 2.5 2000 RM8 - THT 2 1 ISU-170G 2:2:1: 1 13.0 - 16.0 60 10.4 5.2 2000 RM6-SMD-"G" ISU-180B 1.6:1.6:1: 1 5.5 - 6.5 60 4.0 2.5 2000 RM6-SMD-"B" 1 ISU-180G 1.6:1.6:1: 1 5.5 - 6.5 60 4.0 2.5 2000 RM6-SMD-"G" 1 ISU-190A 0.9:0.9:1 7.1 - 8.7 60 4.7 2.6 2000 RM6-THT 3 ISU-190B 0.9:0.9:1 7.1 - 8.7 60 4.7 2.6 2000 RM6-SMD-"B" 3 ISU-190G 0.9:0.9:1 7.1 - 8.7 60 4.7 2.6 2000 RM6-SMD-"G" 3 ISU-200A 1.60: 1: 1 25.5 - 30.2 60 10.0 12.0 2000 RM6 - THT 4 ISU-210A 1.25:1.25:1: 1 13.0 - 16.0 60 6.6 6.8 2000 RM6 - THT 1 ISU-220C 1:1:1.25 6.9 - 8.1 60 2.0 1.4 2000 RM8 - THT 2 ISU-230C 0.75:0.75 : 1 72 - 88 60 14.5 7.5 2000 RM8 - THT 4 THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 5 Packaging Style • ISDN UKO Interface Transformers Package Style RM6 SMD - “B” SMD - “G” 0.051 (1.30) 8 7 6 8 5 7 6 0.051 (1.30) 5 0.100 (2.54) 0.866 (22.00) 0.700 (17.80) 1 2 3 0.200 (5.08) 0.921 (23.40) 0.827 (21.00) 4 1 0.150 (3.81) .484 (12.30) 0.500 (12.70) 0.709 max (18.00 max ) 0.150 (3.81) 0.200 (5.08) 0.150 (3.81) 2 3 0.197 (5.00) 4 0.148 (3.75) 1 2 3 8 7 6 5 0.200 (5.08) 0.126(3.20) 0.150 (3.81) 0.012 (0.30) 0.492 (12.50) 0.500 (12.70) 0.100(2.54) 7 2 3 7 6 5 6 4 5 8 Line 7 (1.00 0.148 (3.75) 0.197 (5.00) IC RM8 - THT Line 8 3 IC 5 2 4 5 IC 1 8 3 2 5 7 4 6 Line IC 3 2 RM8 - THT Schematics 0.776 max (19.70) max 3 6 5 2 IC 2 1 IC Line 7 5 7 12 2 6 6 11 5 2 8 7 8 Line 1 11 11 12 4 Ø .039 0.100(2.54) Line +0.006 -0 (1.0+0.15 -0 ) 0.669 (17.0) 0.028 x 0.016 (0.70 x 0.40) 0.024 (0.60) PT23 - THT 10 9 8 7 IC 8 2 5 7 1 6 11 12 0.130±0.02 (3.3±0.5) PT23 - THT Schematics 0.941 (23.90) 6 4 1.051 (26.70) 0.800 (20.32) 1 2 4 5 1 2 3 4 Line 5 IC 0.445 (11.3) IC 4 8 1 5 8 7 2 9 0.217 (5.50) 0.600 (15.24) THE TALEMA GROUP • Magnetic Components for Universal Applications 6 Line 9 5 0.150 (3.81) 1 7 6 5 0.709 max (18.00 max ) 0.776 max (19.70)max Line 4 Ø .039+0.004 -0 +0.1 -0 0.169 (4.30) IC Line 8 1 0.024 x 0.016 (0.60 x 0.40) 0.984 (25.00) 0.600 (15.24) 0.764 (19.40) RM6 - SMD & THT Schematic 1 2 3 0.024 (0.60) 4 0.148 (3.75) 0.504 (12.80) 0.492 (12.50) 0.709 max (18.00 max ) THT 0.100 (2.54) 0.709 (18.00) 0.685 (17.40) 7 ISDN • UKO THT Single Interface Transformer Features • compatibility with common transceiver IC’s ensures maximum loop length • complies with ANSI standard T1.601 when used with recommended chip • all materials approved to UL94V-0 • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40°C to +85°C • fully RoHS compliant Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UKO Interface Transformers Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Part Number Turns Ratio ± 1% LP (mH Min) ^IDC (mA) LL (μH) CC (pF Max) DCR (Ohms per w inding) Pri VP (Vrms) S ec Schematic UKF-100 0.8:0.8:1 12.6 - 15.4 60 20 200 9.0 5.1 2000 2 UKF-105 0.8:0.8:1 12.6 - 15.4 60 20 200 9.0 5.1 2000 3 UKF-110 2:1 10.8 - 13.8 60 2 55 1.3 0.7 2000 1 UKF-120 0.66:0.66:1 4.5 - 5.9 60 10 150 5.2 4.0 2000 3 UKV-210 1:1:1.25 11.3 - 15.1 60 30 120 12 7.5 2000 3 UKV-220 0.66:0.66:1 4.5 - 5.9 60 15 150 5.2 4.0 2000 3 UKH-320 0.66:0.66:1 4.5 - 5.9 60 50 20 7.6 4.0 3000 4 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: 2.0kV for 2 Sec. = line side windings in series to IC winding 0.5kV for 2 Sec. - line side winding to line side winding UKF 0.551 (14.00) 0.500 (12.70) 0.492 (12.50) 0.400 (10.16) 5 0.200 (5.08) 0.433 (11.00) 0.059 (1.50) Schematic 0.138 (3.50) 1 6 1 TALEMA IN WK/YR UKF-100 10 0.018 x 0.026 (0.45 x 0.66) UKV 0.354 0.300 (9.00) (7.62) 0.551 (14.00) 0.400 (10.16) 0.059 (1.50) 1 5 10 6 UKH 0.654 (16.60) 0.583 (14.80) 0.295 0.197 (7.50) (5.00) 1 2 5 1 IC 3 10 8 6 3 0.571 (14.50) 6 Line 4 IC 1 7 9 10 2 Line IC 1 5 3 5 4 6 0.138(3.50) 0.138 (3.50) 3 0.591 (15.00) 6 0.571 (14.50) 0.079 (2.00) 1 Line 10 5 6 TALEMA IN WK/YR UKV-210 0.018 x 0.026 (0.45 x 0.66) 5 2 IC Line 4 0.024 (0.60) TALEMA IN WK/YR UKH-320 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com 7 ISDN - UKO SMD Single Interface Transformers Features • compatibility with common transceiver IC’s ensures maximum loop length • complies with ANSI standard T1.601 when used with recommended chip • compact sizes in surface mount package • all materials approved to UL94V-0 • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40°C to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings Surface Mount UKO Interface Transformers Complies w ith Reinforced Insulation Level EN60950, UL1950 and UL1459 LP DCR (Ohms) Turns Ratio ± 2% (mH min) LL (μH) ^IDC (mA) CC (pF Max) Primary Secondary VP (Vrms) Schematic UKJ-400 0.8:0.8:1 4.6 - 6.2 10 60 150 5.2 3.5 2000 1 1 Part Number UKJ-420 0.66:0.66:1 4.5 - 6.1 10 60 220 5.2 4.0 2000 UKJ-430 0.8:0.8:1 11.3 - 15.1 26 60 210 5.4 3.3 2000 1 UKJ-440 1:1:1.6 21.6 - 27.1 30 60 420 11.2 9.6 2000 2 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding in series to Line side windings in series @ 10kHz, 100mVrms Dimensions & Schematic UKJ Suggested Pad Layout 0.654 0.591 (16.60) (15.00) 0.400 (10.16) TALEMA IN WK/YR Part Number 0.400 (10.16) 0.520 (13.20) 0.709 (18.00) 0.100 (2.54) 0.098 (2.50) 0° - 8° 1 0.047 (1.20) 5 Line 2 IC 1 6 7 8 6 Line 4 7 0.200 (5.08) Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 8 1 5 8 0.413 0.461 (10.50) (11.70) 0.020 (0.50) IC 4 IC Chipsets - UPO Interface Transformer Selection Guide IC Manufacturer IC Part Number Talema Part Number Mounting Style Transformer C h o ke ^IDC (mA) LP (mH) LL (μH) CC (pF) Vrms LN (mH) 1:1: 2.5 75 1.7 6 100 2500 -- Turns Ratio Single TH & SMD Interface Transformers UF-130A AMD AM2095 & AM20950 PEB2095 IBS Infineon P E B 20590 & P E B 20591 PEB20590VIP/PEB20591VIP-8 P S B 2196 & P S B 2197 National TP34 & TP3406 THT UV-130A THT 1:1: 2.5 75 1.7 6 100 2500 -- UMJ-192S SMD 1:1:1.25: 1.25 75 1.7 10 140 1500 -- UHF-230B THT 1:1: 2.5 100 1.7 20 20 3000 -- UF-130A THT 1:1: 2.5 75 1.7 6 100 2500 -- UV-130A THT 1:1: 2.5 75 1.7 6 100 2500 -- UMJ-192S SMD 1:1:1.25:1.25 75 1.7 10 140 1500 -- UHF-230B THT 1:1:2.5 100 1.7 20 20 3000 -- UMJ-190S SMD 1:1:1: 1 75 1.7 10 180 1500 -- UWJ-185 SMD 1:1:2 140 1.7 10 100 1500 -- UMJ-190S SMD 1:1: 1: 1 75 1.7 10 180 1500 -- UMJ-195S SMD 1:1:2:2 75 1.7 10 180 1500 -- UHJ-185 SMD 1:1:2:2 120 1.7 20 20 3000 -- UMJ-190S SMD 1:1:1:1 75 1.7 10 180 1500 -- UWJ-185 SMD 1:1:2 140 1.7 10 100 1500 -- 75 1.7 5 150 1500 -- Dual SMD Interface Transformer Infineon P E B 2096, P S B 2196 & P S B 2197 UAJ-140C SMD 1:1:2: 2 TH & SMD Interface Modules AMD AM2095 & AM20950 PEB2095 IBS Infineon National UMF-130A-152 THT 1:1: 2.5 75 1.0 6 100 1500 2 x 1.5 UMV-130B-172 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 1.7 UMV-130B-602 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 6.0 UAJ-130A-502 SMD 1:1: 2.5 75 1.7 5 100 1500 2 x 5.0 UMF-130A-152 THT 1:1: 2.5 75 1.0 6 100 1500 2 x 1.5 UMV-130B-172 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 1.7 UMV-130B-602 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 6.0 UAJ-130A-502 SMD 1:1: 2.5 75 1.7 5 100 1500 2 x 5.0 PEB20590VIP/PEB20591VIP-8 UAJ-120A-502 SMD 1:1: 2 75 1.7 5 100 1500 2 x 5.0 P E B 2096, P S B 2196 & P S B 2197 UAJ-140B-502 SMD 1:1: 2: 2 75 1.7 10 180 1500 2 x 5.0 TP34 & TP3406 UAJ-120A-502 SMD 1:1: 2 75 1.7 5 100 1500 2 x 5.0 Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com 9 ISDN • UPO THT Single Interface Transformer Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TSS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO TH Interface Transformers Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 DCR (Ohms per w inding) Turns Ratio ± 1% LP (mH Min) ^IDC (mA) LL (μH) CC (pF Max) Pri S ec UF-130A 1:1:2,5 1,7 75 6 100 0,80 2,00 2500 UV-130A 1:1:2,5 1.7 75 6 100 0,80 2,00 2500 Part Number VP (Vrms) Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: 2,5kV for 1 sec. - Line side windings in series to IC winding 0,5kV for 2 sec. - Line side winding to winding Dimensions & Schematic UF 0.551 (14.00) 0.500 (12.70) 0.492 (12.50) 0.400 (10.16) 5 0.200 (5.08) 0.433 (11.00) 0.059 (1.50) 0.138 (3.50) 6 1 TALEMA IN WK/YR UF-130A 10 0.018 x 0.026 (0.45 x 0.66) 6 0.551 (14.00) 0.400 (10.16) 1 10 0.059 (1.50) 0.571 (14.50) 5 TALEMA IN WK/YR UV-130A 6 0.018 x 0.026 (0.45 x 0.66) 0.138(3.50) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 10 IC 3 10 5 UV 0.354 0.300 (9.00) (7.62) Line 1 8 ISDN • UPO THT Single Interface Transformer Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO TH Interface Transformers Complies w ith Reinforced Insulation Level EN60950 and UL1950 Part Number Turns Ratio ± 2% LP (mH Min) ^IDC (mA) LL (μH) CC (pF Max) 1:1:2,5 1.7 100 20 20 UHF-230B DCR (Ohms per w inding) Pri S ec 1.2 2.1 VP (Vrms) 4000 Test Conditions Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side windings in series to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: 4,0kV for 2 sec. - Line side windings in series to IC winding 3,0kV for 1 min. - Line side windings in series to IC winding Dimensions & Schematic UHF 0.583 (14.80) 0.295 0.197 (7.50) (5.00) 0.654 (16.60) 1 2 0.571 (14.50) 0.079 (2.00) Line 3 0.591 (15.00) 6 5 2 0.138 (3.50) 0.024 (0.60) 4 IC 1 5 3 TALEMA IN WK/YR UHF-230B 4 6 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 11 ISDN - UPO SMD Single Interface Transformers Features • matched to Infineon’s PEB20950 & PEB20951 and National’s TP34 & TP3406 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO SMD Interface Transformers Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Part Number DCR (Ohms) LP (mH min) LL ^IDC CC ± 2% (μH) (mA) (pF Max) Primary Secondary (Vrms) 1:1:4 1:1:2 1.7 1.7 10 20 140 140 100 90 1.5 1.5 5.2 3.0 1500 1500 Turns Ratio UWJ-180 UWJ-185 VP Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1500 V for 2 Sec. Line side windings in series to IC side winding Dimensions & Schematic UWJ Suggested Pad Layout 0.654 0.591 (16.60) (15.00) TALEMA IN WK/YR Part Number 0.400 (10.16) 0.400 (10.16) Line 6 0.709 (18.00) 0.100 (2.54) 0° - 8° 0.047 (1.20) 10 0.098 (2.50) 0.413 0.461 (10.50) (11.70) 0.200 (5.08) Surface Coplanarity will be 0.004(0.10) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 12 1 7 9 0.520 (13.20) 0.020 (0.50) IC 5 ISDN - UPO SMD Single Interface Transformers Features • matched to Infineon’s PSB2196 & PSB2197 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings Surface Mount UPO Interface Transformers Complies w ith Reinforced Insulation Level EN60950, UL1950 and UL1459 Part Number (mH min) LL (μH) ^IDC (mA) CC (pF Max) Primary Secondary VP (Vrms) 1:1:2: 2 1.7 20 120 20 1.3 1.3 3000 UHJ-185 LP DCR (Ohms) Turns Ratio ± 2% Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding in series to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 3kV for 2 sec. Line side windings to IC side windings Reinforced Insulation: Line Side in series to IC side in series Working Voltage: 250Vrms Dimensions & Schematic UHJ Suggested Pad Layout 0.654 0.591 (16.60) (15.00) 0.400 (10.16) TALEMA IN WK/YR Part Number 0.400 (10.16) Line 0.709 (18.00) 0.100 (2.54) 0.098 (2.50) 1 6 7 2 3 8 4 0° - 8° 0.520 (13.20) 0.413 0.461 (10.50) (11.70) 0.020 (0.50) 0.047 (1.20) IC 5 Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise 0.200 (5.08) Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 13 ISDN • UPO SMD Single Interface Transformers Features • designed for optimum compatability with all established interface IC’s • excellent and consistent balance between windings • compact size in surface mount package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO Interface Transformer Complies w ith Basic Insulation Level EN6-950, UL1950 and UL1459 DCR (Ohms per w inding) Turns Ratio ± 2% LP (mH Min) ^IDC (mA) LL (μH) CC (pF Max) Pri S ec UMJ-190S 1:1:1: 1 1.7 75 10 180 0.8 0.8 1500 UMJ-192S UMJ-195S 1:1:1,25: 1,25 1:1:2: 2 1.7 1.7 75 75 5 10 140 180 0.5 0.8 1.0 1.6 1500 1500 Part Number VP (Vrms) Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1,5kV - Line side winding in series to IC side winding in series Dimensions & Schematic 0.551 0.472 (14.00) (12.00) Suggested Pad Layout TALEMA IN WK/YR Part Number Schematic 0.300 (7.62) 0.100 (2.54) 0.300 (7.62) 0.433 (11.00) 0° - 8° 0.590 (15.00) 0.102 (2.60) Line 0.047 (1.20) IC 5 1 6 7 2 3 8 4 0.339 0.291 (8.60) (7.40) 0.020 (0.50) Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 14 ISDN • UPO SMD Interface Transfomer Modules Features • matched to Infineon’s PEB2096, PSB2196 & PSB2197 chipsets • excellent and consistent balance between windings • compact size in surface mount package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2001, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temberature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings Surface Mount U PO Interface Transformer Modules Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Turns Ratio ± 2% Part Number UAJ-140C LP (mH min) ^IDC (mA) LL (μH) CC (pF Max) 1.7 75 5 150 1:1:2: 2 DCR (Ohms per w inding) Pri S ec 0.8 1.6 VP (Vrms) Schematic 1500 C Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding/s short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding (windings in series) to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1.5kV for 2 sec. - w1+w2 to w3+w4 0.5kV for 2 sec. - w1+w3 to w2+w4 High VoltageTest: UPULSE(w1+w2 to w3+w4); 2kVOP for 10μs/700μs wave form, 10 pulses in 10 second cycle with changing polarity. Dimensions 0.551 0.472 (14.00) (13.00) Schematic Suggested Pad Layout TALEMA IN WK/YR Part Number 0.100 (2.54) C 0.047 (1.20) Line 0.044 (1.11) 7 x 0.100 (2,54) 0.787 (20.00) 0° - 8° 13 0.354 0.307 (9.00) (7.80) 14 15 0.591 0.374 (15.00) (9.50) 16 IC w3 w1 w4 w2 1 9 2 3 10 11 4 12 Line IC w3 w1 w4 w2 5 6 7 8 0.700 (17.78) 0.020 x 0.12 (0.50 x 0.30) Surface Coplanarity will be 0.004(0.10) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 15 ISDN • UPO SMD Interface Transfomer Modules Features • designed for optimum compatability with all established interface IC’s • excellent and consistent balance between windings • compact size in surface mount package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temberature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings Surface Mount UPO Interface Transformer Modules Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Part Number Turns Ratio ± 2% LP (mH min) ^IDC (mA) LL (μH) CC (pF Max) 1:1:2 1:1:2,5 1:1:2: 2 1.7 1.7 1.7 75 75 75 5 5 5 100 100 180 UAJ-120A-502 UAJ-130A-502 UAJ-140B-502 DCR (Ohms per w inding) Pri S ec 0.8 0.5 0.8 1.6 1.0 1.6 Double Choke VP (Vrms) Schematic 1500 1500 1500 A A B LN (mH) DCR (Ohms) 5 5 5 0.4 0.4 0.4 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding/s short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding (windings in series) to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side winding (IC windings in series) Inductance CM Choke: Measured @ 10kHz, 100mVrms Dimensions & Schematic Suggested Pad Layout 0.044 (1.11) 7 x 0.100 (2,54) 0.787 (20.00) 0.047 (1.20) 0.591 0.374 (15.00) (9.50) 0° - 8° 0.551 0.472 (14.00) (13.00) 0.100 (2.54) TALEMA IN WK/YR Part Number 0.354 0.307 (9.00) (7.80) 0.020 x 0.12 (0.50 x 0.30) A Line IC 5 8 4 3 14 2 1 15 16 9 B 0.700 (17.78) 5 Line IC 8 4 3 7 10 14 9 2 1 15 16 Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 16 ISDN • UPO THT Interface Transformer Module Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • compact size in through-hole package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings U PO TH Interface Transformer Module C omplies w ith B asic Insulation Level EN 60950, U L1950 and U L1459 Part N umber UMF-130A-152 Turns R atio ± 1% LP (mH Min) ^IDC (mA) LL (μH ) CC (pF Max) 1:1:2,5 1,0 75 6 100 DCR (Ohms per w inding) Pri S ec 0,31 0.65 D ouble C hoke VP (Vrms) Schematic LN (mH ) DCR (Ohms) 1500 A 1,5 0,36 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: Transformer - 1,5kV for 1 sec. - Line side windings in series to IC winding Choke - 0,5kV for 1 sec. - winding to winding Dimensions & Schematic UMF 0.551 (14.00) 0.500 (12.70) 0.492 (12.50) 0.400 (10.16) 5 0.200 (5.08) 0.433 (11.00) 0.059 (1.50) 0.138 (3.50) Line 6 TALEMA IN WK/YR UMF-130A-152 1 10 6 7 IC 9 1 2 5 0.018 x 0.026 (0.45 x 0.66) 8 4 3 10 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 17 ISDN • UPO THT Interface Transformer Modules Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • compact size in through-hole package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO TH Interface Transformer Modules Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Turns Ratio ± 1% LP (mH Min) ^IDC (mA) UMV-130B-172 1:1:2,5 1,7 UMV-130B-602 1:1:2,5 1.7 Part Number LL (μH) CC (pF Max) 75 6 75 6 DCR (Ohms per w inding) VP (Vrms) Pri S ec 100 0,80 2,00 2500 100 0,80 2,00 2500 Double Choke Schematic LN (mH) DCR (Ohms) B 1,7 0,25 B 6,0 0,80 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: Transformer - 2,5kV for 1 sec. - Line side windings in series to IC winding 0,5kV for 1 sec. - Primary winding to Primary winding Choke - 0,5kV for 1 sec. - winding to winding Dimensions & Schematic UVM 0.020 x 0.020 (0,52 x 0,52) 1.142 (29.00) 10 8 x 0.100 (2,54) 9 TALEMAINWK/YR UMV-130B-XXX 1 18 0.350 (8.89) 0.413 (10,50) 1 17 0.138 ±0.020 (3,50 ±0,50) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 18 3 IC 9 4 5 18 0.059 (1.50) 0.594 (15.10) Line 2 16 10 Common Mode Interface Chokes - DIL and SMD Current compensated EMI noise suppression chokes for data and signal line filtering Talema manufactures a comprehensive range range of common mode noise suppression chokes designed for interfacing and reduction of electromagnetic inteference (EMI). These chokes provide both differential and common mode noise attenuation while allowing the signal to pass through virtually undistorted. The chokes are available in sizes ranging from standard to ultra miniature in both DIL and SMD styles and offer compatability with all common footprints. The quick reference chart shown below provides a quick overview of choices available from the broad selection being offered by Talema. D IL a n d S M D C o m m o n M o d e In t e r f a c e C h o k e s Series CTJ-2-XXX Data Line Inductance R an g e Number of Lines 11μH - 4.7mH 2 CTJ-2-XXX-S Power Line 11μH - 51μH 2 CLJ-2-XXX 5μH - 47mH 2 6μH - 51μH 2 CLJ-4-XXX 11μH - 12mH 4 CMJ-2-XXX 5μH - 47mH 2 CMJ-4-XXX 5μH - 12mH 4 Data Line CLJ-2-XXX-S Power Line CFJ-3-XXX 24μH - 4.7mH 3 CFJ-4-XXX 33μH - 4.7mH 4 CSJ-2-XXX 11μH - 47mH 2 CSJ-3-XXX 11μH - 12mH 3 CSJ-4-XXX 11μH - 12mH 4 CCJ-2-XXX 26μH - 70mH 2 CCJ-4-XXX 26μH - 58mH 4 CDJ-XXX 1.0mH - 70mH 2 CQJ-XXX 1.0mH - 90mH 4 CDF-XXX CDV-XXX CQF-XXX CQV-XXX CKV-XXX Data Line CKV-XXX-S Power Line COJ-16-XXX 1.0mH - 70mH 1.0mH - 90mH 120μH - 68mH 4.7mH - 47mH 24μH - 5.0mH Data Sheet Reference "J" Lead SMD 4 x 1.27 5.0 x 3.3 x 3.3 CTJ "J" Lead SMD "J" Lead SMD "J" Lead SMD "J" Lead SMD "J" Lead SMD "J" Lead SMD Flat - THT 4 Flat - THT 4 2 2 16 Vertical - THT 6 6 CUJ-XXX-16A 8 CUJ-XXX-16B 8 2 to 16 4 x 2.54 8.9 x 5.4 x 4.8 8 x 1.27 Vertical - THT 4 Data Line Filters Max. Board Area W x L x Ht (mm) 2 CUJ-XXX-16E 24μH - 4.7mH No. Contacts & Pitch 2 CUJ-XXX-16C CUJ-XXX-16D Mounting Style 4 x 2.54 8 x 1.27 CLJ-4 9.0 x 5.8 x 5.3 6 x 2.54 11.5 x 7.8 x 7.2 8 x 2.54 11.5 x 9.6 x 7.2 6 x 2. .54 8.0 x 6.6 x 4.5 8 x 2.54 8.0 x 9.14 x 4.5 4 x 7.62 8 x 2.54 4 x 10.16 8 x 2.54 4 x 10.16 8 x 2.54 CLJ-2 CMJ-2 CMJ-4 C FJ C SJ 14.0 x 11.0 x 9.0 CCJ 16.6 x 13.2 x 11.7 CDJ - CQJ 14.0 x 12.5 x 11.0 9.0 x 14.0 x 14.5 14.0 x 12.5 x 11.0 9.0 x 14.0 x 14.5 CD - V & F CQ - V & F Vertical - THT 4 x 2.54/5.08 7.4 x 15.2 x 17.6 "J" Lead SMD 40 x 1.27 16.2 x 28.0 x 6.0 C KV - D L C KV - PL 21 "J" Lead SMD 16 x 1.27 9.6 x 12.8 x 6.0 CUJ "J" Lead SMD Various DLF-J Visit our web site http://www.talema-nuvotem.com to obtain data sheets or “Current Compensated EMI Noise Suppression Chokes” brochure. Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com 19 Tape & Reel Packaging and Dimensions Dimensions for Carrier Tape (Unit : mm) +0.1 T±0.05 B0±0.10 P±0.10 S0±0.10 D1 A F±0.10 W±0.30 E±0.10 D0-0.0 P2±0.10 P0±0.10 A0±0.10 A K0±0.10 Section A-A D im e n s io n s in m m Type D1 P A0 W F E P2 P0 D0 32.00 14.20 1.75 2.00 4.00 Ø1.5 Ø2.00 24.00 13.55 16.95 28.40 0.40 12.30 330x32 200 5/1000 UWJ 32.00 14.20 1.75 2.00 4.00 Ø1.5 Ø2.00 24.00 13.55 16.95 28.40 0.40 12.30 330x32 200 5/1000 UHJ 32.00 14.20 1.75 2.00 4.00 Ø1.5 Ø2.00 24.00 13.55 16.95 28.40 0.40 12.30 330x32 200 5/1000 UAJ 44.00 20.20 1.75 2.00 4.00 Ø1.5 Ø2.00 20.00 14.40 20.40 40.40 0.40 9.55 250 5/1250 K0 330x44 -0.0 P0±0.10 T±0.05 A B0±0.10 F±0.10 E±0.10 T D1+0.1 D0 P2±0.05 A P±0.10 A0±0.10 D im e n s io n s in m m Type UMJ S0 Quantity Quantity (Pcs/Reel) (Reel/Cased) UKJ W±0.30 B0 R eel Siz e W F E P2 P0 24.00 11.50 1.75 2.00 4.00 D0 D1 P Ø1.50 Ø1.50 20.00 A0 B0 T K0 11.20 14.60 0.40 8.55 K0±0.10 Section A-A R eel Siz e 330x24 Quantity Quantity (Pcs/Reel) (Reel/Cased) 400 THE TALEMA GROUP · Magnetic Components for Universal Applications 20 5/2000 Tape & Reel Packaging and Dimensions C A N Reel Dimensions (Unit : mm) B Type A B C N 330 x 24 330 24 20.2 100 330 x 32 330 32 20.2 100 330 x 44 330 44 20.2 100 TALEMA TALEMA IN IN M/Y Wk/Yr MMJ- 100B-501 Part Number R e e l D im e n s io n s in m m Blank Min. 160mm TALEMA IN TALEMA IN M/Y Wk/Yr MMJ- 100B-501 Part Number START TALEMA IN IN TALEMA M/Y Wk/Yr MMJ- 100B-501 Part Number END Components Blank Min. 400mm Drawing direction Inner Carton Outer Carton 335 355 50 33 35 0 5 285 THE TALEMA GROUP · Magnetic Components for Universal Applications 21 Notes THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 20 Authorised Talema Sales Representatives and Disstributors Sales Representatives Germany Australia France PLZ 1, 4,5, 6, 8 & 9 TORTECH PTY. LTD. POB 194 North Strathfield, Sydney, N.S.W. 2137 Tel: Int. + 61 2 9642 6003 Fax: Int. + 61 2 9642 6127 E-Mail: [email protected] Web Site: www.tortech.com.au E.S.I.A 5-7 Place Marcel Rebuffat Courtaboeuf 7 Villejust 91971 Courtaboeuf Cedex Tel: Int. + 33 1 6931 4410 Fax: Int. + 33 1 6931 4425 E-Mail: [email protected] Web Site: www.esia.fr TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 841 00 - 0 Fax: Int. + 49 89 841 00 25 Email: [email protected] PLZ 2 & 3 (less 35 & 36) H. J. MERCK & Co. GmbH Hasenhöhe 128 22587 Hamburg Tel: Int. + 49 40 87 08 63-0 Fax: Int. + 49 40 87 08 63-33 E-mail: [email protected] PLZ 7 BERND BIELER Industrievertretung Max-Eyth-Straße 1 72379 Hechingen Tel: Int. + 49 7471 1804-0 Fax: Int. + 49 7471 1804-10 E-mail: [email protected] Benelux ISATRONICK B.V.B.A. Doolhoflaan 17 B-2640 Mortsel Tel: Int. + 32 3 448 1976 Fax: Int. + 32 3 448 1195 E-Mail: [email protected] Web Site: www.isatronick.be Denmark & Sweden UK DELTA COMPONENTS LTD. The Courtyard Seven Acres, Smallfield Road Horne, Surrey RH6 9JP Tel: Int. + 44 1342 844 555 Fax: Int. + 44 1342 844 552 [email protected] www.deltacomponents.com USA Spain H. F. Transformers, Chokes & Inductors OTTO RATING S.A. Castellnou, 31-33 08017 Barcelona Tel: Int.+34 93 252 2708 Fax: Int.+34 93 205 6264 E-mail: [email protected] Web Site: www.rating.es Switzerland NORDTEK DANMARK Horsensvej 134 DK-8300 Odder Tel: Int. + 45 86 554 344 Fax: Int. + 45 86 554 644 E-Mail: [email protected] Web Site: www.nordtek.dk BTB COMPONENTS AG Im Chlösterli 4 CH-8902 Urdorf Tel: Int. + 41 44 734 4888 Fax: Int. + 41 44 734 4892 E-mail: [email protected] Austria Italy TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 841 00 - 0 Fax: Int. + 49 89 841 00 25 Email: [email protected] TECHNOLASA ELETTRONICA Via Macello, 65/B I-39100 Bolzano Tel: Int. + 39 0471 305 400 Fax: Int. + 39 0471 305 444 E-Mail: [email protected] ALFAMAG ELECTRONICS LLC 945 Parkwood PO Box 668 Rolla, Missouri 65402 Tel: Int.+573 364 2422 Fax: Int.+573 364 5390 E-Mail: [email protected] Web Site: www.alfamag.com 50/60 Hz Toroidal Transformers AMVECO MAGNETICS, INC. 11222 Richmond Ave., Suite 120 Houston, TX 77042 E-Mail: [email protected] Web Site: www.amveco.com Distributors Germany BÜRKLIN OHG MÜNCHEN Schillerstr. 41 80336 München Tel: Int.+49 89 558 75-0 Fax: Int.+49 89 558 75-421 E-Mail: [email protected] Web: www.buerklin.com SCHUKAT ELECTRONIC VERTRIEBS GMBH Daimlerstraße 26 40789 Monheim Tel: Int.+49 2173 9505 Fax: Int.+49 2173 950999 Web: www.schukat.com BÜRKLIN OHG DÜSSELDORF Hoherweg 245 40231 Düsselforf Tel: Int.+49 211 9067-0 Fax: Int.+49 211 9067-125 E-Mail: [email protected] Web: www.buerklin.com RUTRONIK ELEKTRONISCHE BAULEMENTE GMBH Industriestraße 2 75228 Ispringen/Pforzheim Tel: Int.+49 7231 801-0 Fax: Int.+49 7231 82282 E-Mail: [email protected] Web: www.rutronik.com Italy Switzerland RUTRONIK ITALIA S.r.i 21, Via Caldera Centro Direzionale S.Siro 20153 Milano Tel: Int.+39 02 40951 1 Fax: Int.+39 02 40951 224 E-Mail: [email protected] Web: www.rutronik.com RUTRONIK ELEKTRONISCHE BAUELEMENTE AG Hölzliwisenstraße 5 CH-8604 Volketswil Tel: Int.+41 44 947 3737 Fax: Int.+41 44 947 3747 E-Mail: [email protected] UK RS COMPONENTS LTD. Birchington Road Corby Northants, NN17 9RS Tel: Int.+44 8457 201201 Fax: Int.+44 845 850 9911 www.rs-components.com Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Worldwide Toroidal Specialists 09-06 nt magnetics nuvotem Summary TOTAL PROGRAM SECTION1 • TOROIDAL 50/60Hz TRANSFORMERS SECTION 2 • TOROIDAL PCB TRANSFORMERS SECTION 3 • ELEVEN GOOD REASONS TO SELECT TALEMA TOROIDAL TRANSFORMERS SECTION 4 • CHOKES, INDUCTORS AND TRANSFORMERS FOR POWER APPLICATIONS SECTION 5 • COMPONENTS FOR TELECOMMUNICATIONS AND DATA LINE TECHNOLOGY SECTION 6 • CURRENT COMPENSATED EMI NOISE SUPPRESSION CHOKES SECTION 7 • CURRENT SENSE TRANSFORMERS I NDUCTORS SECTION 8 • LAN MAGNETIC COMPONENTS ETHERNET APPLICATIONS AND FOR SECTION 9 • TI/E1/CEPT-PRI - T3/DS3/E3/STS-1 FOR TELECOMMUNICATION PRODUCTS SECTION 10 • U INTERFACE TRANSFORMERS FOR COMMUNICATIONS AND DATA LINE TECHNOLOGY SECTION 11 • TRANSFORMERS FOR BROADBAND Access AND FIBRE CHANNEL INTERFACE . THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications