TAPE AND REEL Tape and Reel Specifications—Surface Mount Tape and Reel Packing Tape and reel packing is available for all SO, TSOT (thin SOT23), SOT-23 3L/4L, SOT-223, SSOP, TSSOP, QFN, DFN and DD packages in accordance with EIA Specification 481-D with the following exceptions: (DFN(DCB), TSOT and SC70 pin 1 is placed into quadrant 2. The pin 1 quadrant graphic “ 2 ”is added onto the reel and pizza box labels. For square QFN as non-compliant to Figure 2 in the EIA-418 rev. D, but LTC will follow the Flow Chart for the Rules in Figure 3). Table 1 lists the applicable tape widths, dimensions and quantities for all LTC surface mount products. Consult a sales office for tape and reel pricing and minimum order requirements. Tape and reel packaging is ordered with a ‘#TRPBF’ suffix for lead free finish parts or a ‘#TR’ suffix for lead based finish parts. *Packages marked with an asterisk (*) below are available in 500 unit reels through designated sales channels. 500 unit reels are ordered with a ‘#TRMPBF’ or ‘#TRM’ suffix. **Tape Widths marked with a double asterisk (**) converted to 8mm width in July 2007. Table 1. Tape and Reel Specifications LTC Package Code Designator DC* DFN (2mm × 2mm) Number of Leads Offered 3, 4, 6, 8 W Tape Width 8/12mm** P1 Component Pitch 4mm P0 Hole Pitch 4mm Reel Diameter 180mm (7”) Units per Reel 2,500* DCB* DFN (2mm × 3mm) 6, 8 8/12mm** 4mm 4mm 180mm (7”) 2,500* DD DFN (3mm × 3mm) 8, 10, 12 12mm 8mm 4mm 330mm (13”) 2,500 DDB* DFN (3mm × 2mm) 8, 10, 12 8/12mm** 4mm 4mm 180mm (7”) 2,500* DE, UE DFN (4mm × 3mm) 12, 14 12mm 8mm 4mm 330mm (13”) 2,500 DF DFN (4mm × 4mm) 12 12mm 8mm 4mm 330mm (13”) 2,500 DH DFN (5mm × 5mm) 16 12mm 8mm 4mm 330mm (13”) 2,500 DHC DFN (5mm × 3mm) 16 12mm 8mm 4mm 330mm (13”) 2,500 DHD DFN (5mm × 4mm) 16 12mm 8mm 4mm 330mm (13”) 2,500 DJC DFN (6mm × 3mm) 22 16mm 8mm 4mm 330mm (13”) 2,500 DKD DFN (7mm × 4mm) TSSOP (4.4mm) TSSOP (4.4mm) TSSOP (4.4mm) TSSOP (6.1mm) SSOP (5.3mm) SSOP (5.3mm SSOP (5.3mm SSOP (0.150) SSOP (0.150) SSOP (7.62mm) 24, 32 16mm 8mm 4mm 330mm (13”) 2,500 16mm 16mm 16mm 24mm 16mm 16mm 24mm 12mm 16mm 24mm 8mm 8mm 8mm 12mm 12mm 12mm 12mm 12mm 8mm 8mm 12mm 8mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 180mm (7”) 2,500 2,500 2,000 1,800 2,000 1,800 2,000 2,500 2,500 1,000 2,500 LTC Package Type F FE FE FW G G G GN GN GW KC UTDFN (2mm × 2mm) 14, 20 16, 20, 24 28, 38 48, 56 16 20, 24 28, 36, 44, 48 16 20, 24, 28 36, 44 8 KD UTDFN (3mm × 3mm) 10 12mm 8mm 4mm 330mm (13”) 2,500 KE UTDFN (4mm × 3mm) DD MSOP (0.118) 14 12mm 8mm 4mm 330mm (13”) 2,500 3, 5 or 7 8 24mm 12mm 16mm 8mm 4mm 4mm 330mm (13”) 330mm (13”) 750 2,500 M, Q, R MS8, MS8E 1 TAPE AND REEL Tape and Reel Specifications—Surface Mount Table 1. Tape and Reel Specifications (cont) LTC Package Code Designator MS, MSE PD PDC PF S8, S8E S S ST SW SW SW SW SW S3* S5* S6* SC6* SC8* TS8* UDB* UTQFN (3mm × 3mm) Number of Leads Offered 10, 12, 16 16 W Tape Width 12mm 12mm P1 Component Pitch 8mm 8mm P0 Hole Pitch 4mm 4mm Reel Diameter 330mm (13”) 330mm (13”) Units per Reel 2,500 2,500 UTQFN (3mm × 4mm) 20 12mm 8mm 4mm 330mm (13”) 2,500 UTQFN (4mm × 4mm) SO (0.150) SO (0.150) SO (0.150) SOT-223 SO (0.300) SO (0.300) SO (0.300) SO (0.300) SO (0.300) SOT-23 SOT-23, TSOT SOT-23, TSOT SC70 SC70 TSOT 24, 28 12mm 8mm 4mm 330mm (13”) 2,500 8 14 16 3 16 18 20 24 28 3 5 6 6 8 8 10, 12 12mm 16mm 16mm 16mm 16mm 24mm 24mm 24mm 24mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 12mm 12mm 12mm 12mm 12mm 12mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 330mm (13”) 180mm (7”) 180mm (7”) 180mm (7”) 180mm (7”) 180mm (7”) 180mm (7”) 180mm (7”) 2,500 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,500* 2,500* 2,500* 2,500* 2,500* 2,500* 2,500* LTC Package Type MSOP (0.118) QFN (3mm × 2mm) UD QFN (3mm × 3mm) 16, 20 12mm 8mm 4mm 330mm (13”) 2,500 UDC QFN (3mm × 4mm) 18, 20, 24 12mm 8mm 4mm 330mm (13”) 2,500 UDD QFN (3mm × 5mm) 24 12mm 8mm 4mm 330mm (13”) 2,500 UDE QFN (3mm × 6mm) 28 16mm 8mm 4mm 330mm (13”) 2,500 UF QFN (4mm × 4mm) 16, 20, 24, 28 12mm 8mm 4mm 330mm (13”) 2,500 UFD QFN (4mm × 5mm) 20, 24, 28 12mm 8mm 4mm 330mm (13”) 2,500 UFE QFN (4mm × 6mm) 26, 32, 38 16mm 8mm 4mm 330mm (13”) 2,500 UFF QFN (4mm × 7mm) 34, 36, 44 16mm 8mm 4mm 330mm (13”) 2,500 UH QFN (5mm × 5mm) 20, 24, 32, 40 12mm 8mm 4mm 330mm (13”) 2,500 UHE QFN (5mm × 6mm) 28, 36, 42 16mm 8mm 4mm 330mm (13”) 2,500 UHF QFN (5mm × 7mm) 38 16mm 8mm 4mm 330mm (13”) 2,500 UHG QFN (5mm × 8mm) 39, 40, 52 16mm 8mm 4mm 330mm (13”) 2,500 UHH QFN (5mm × 9mm) 48, 56, 58 16mm 8mm 4mm 330mm (13”) 2,500 UJ QFN (6mm × 6mm) 40 16mm 12mm 4mm 330mm (13”) 2,000 UK QFN (7mm × 7mm) 44, 48 16mm 12mm 4mm 330mm (13”) 2,000 QFN (7mm × 8mm) 47, 52 16mm 12mm 4mm 330mm (13”) 2,000 UKG UKH QFN (7mm × 9mm) 64 16mm 12mm 4mm 330mm (13”) 2,000 UKJ QFN (7mm × 11mm) 64 24mm 12mm 4mm 330mm (13”) 2,000 UKK QFN (7mm × 12mm) 68 24mm 12mm 4mm 330mm (13”) 2,000 UP QFN (9mm × 9mm) 64 16mm 12mm 4mm 330mm (13”) 2,000 WKG QFN (7mm × 8mm) 52 16mm 12mm 4mm 330mm (13”) 2,000 WP QFN (9mm × 9mm) 64 16mm 12mm 4mm 330mm (13”) 2,000 2 TAPE AND REEL Tape and Reel Specifications—Surface Mount Bending Radius Embossed Carrier Dimensions (8mm, 12mm, 16mm, 24mm Tape Only) T2 10 PITCHES CUMULATIVE TOLERANCE ON TAPE ±0.2mm(±0.008) P0 T P2 D0 E1 SEE NOTE 1 TOP COVER TAPE R MIN A0 F BENDING RADIUS SEE NOTE 2 SMP 14 B1 W B0 K0 SEE NOTE 1 T1 D1 FOR COMPONENTS 2.0mm × 1.2mm AND LARGER P1 EMBOSSMENT FOR MACHINE REFERENCE ONLY INCLUDING DRAFT AND RADII CONCENTRIC AROUND B0 USER DIRECTION OF FEED CENTER LINES OF CAVITY SMP 12 Embossed Tape—Constant Dimensions Tape Width 8mm 12mm 16mm 24mm D0 +0.10 1.5 –0.0 +0.004 (0.059) –0.0 E1 1.75 ± 0.10 (0.069 ± 0.004) P0 4.0 ± 0.10 (0.157 ± 0.004) P2 2.0 ± 0.05 (0.079 ± 0.002) T Max 0.600 (0.024) T1 Max 0.10 (0.004) A0 B0 k0 See Note 1 Embossed Tape Variable Dimensions Tape Width B1 Max D1 Min F T2 Max R Min W Max 8mm 4.35 (0.171) 1.0 (0.039) 3.5 ±0.05 2.5 (0.098) 25 0.984 8.3 12mm (0.323) 8.2 (0.059) 1.5 (0.217 ±0.002) 5.5 ±0.05 (0.256) 6.5 (0.256) 30 (1.181) 12.3 16mm 12.1 (0.476) 1.5 (0.217 ±0.002) 7.5 ±0.10 (0.295 ±0.004) 8.0 (0.315) 40 (1.575) 16.3 24mm 20.1 (0.791) 1.5 (0.217 ±0.002) 11.5 ±0.10 (0.453 ±0.004) 12.0 (0.472) 50 (1.969) 24.3 Note 1: The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: a) the component does not protrude above the top surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction after the top cover tape has been removed. c) rotation of the component is limited to 20° maximum for 8mm and 12mm tapes and 10° maximum for 16mm and 24mm tapes. d) lateral movement of the component is restricted to 0.5mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm and 24mm wide tape. Note 2: The tape with or without components shall pass around R without damage. 3 TAPE AND REEL Tape and Reel Specifications—Surface Mount Component Rotation θ°T TYPICAL COMPONENT CAVITY CENTER LINE BO TAPE WIDTH (mm) 8, 12 16 TO 200 MAXIMUM ROTATION (θ°T) 20 10 TYPICAL COMPONENT CENTER LINE AO SMP 13 Tape Camber (Top View) 250mm (9.843) 1mm (0.039) MAX TAPE 1mm (0.039) 500mm MAX (19.686) ALLOWABLE CAMBER TO BE 1mm/250mm SMP 15 Tape Leader (Start/End) Specification CARRIER TAPE END START COVER TAPE COVER TAPE 160mm (6.30) MIN COMPONENTS EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE USER DIRECTION OF FEED 4 500mm (19.69) MIN SMP 16 TAPE AND REEL Tape and Reel Specifications—Surface Mount S3 SOT-23 Devices SMP 28 USER DIRECTION OF FEED S5 TSOT, SOT-23 Devices SMP 29 USER DIRECTION OF FEED SC6, S6 and TS8 SC70, TSOT, SOT-23, DFN (DCB) Devices SMP 32 USER DIRECTION OF FEED 5 TAPE AND REEL Tape and Reel Specifications—Surface Mount ST SOT-223 Devices USER DIRECTION OF FEED SMP 17 M, Q, R DD Pak Devices USER DIRECTION OF FEED SMP 18 F, FE, FW, G, GN, GW, S8, S, SW, MS8, MS, MS8E, MSE, SSOP, TSSOP, QFN, DFN, UTDFN and UTQFN Devices [except DFN (DCB)] USER DIRECTION OF FEED 6 SMP 19 TAPE AND REEL Reel Dimensions—Surface Mount Direction of Feed Reel Dimensions W3 40mm (OPTIONAL) MIN ACCESS HOLE AT SLOT LOCATION DIRECTION OF FEED C ARBOR HOLE DIAMETER B* TOP COVER TAPE N D* A FULL RADIUS* LABEL AREA W2 (MEASURED AT HUB) IF PRESENT, TAPE SLOT IN CORE FOR TAPE START 2.5mm MIN WIDTH 10mm MIN DEPTH TAPE EMBOSSMENT SMP 20 *DRIVE SPOKES OPTIONAL. IF USED, ASTERISKED DIMENSIONS APPLY. Tape Width 8mm 12mm 16mm 24mm A Max B MIn 180 1.5 330 1.5 180 1.5 330 1.5 330 1.5 330 1.5 C D* Min N MIn 13.0 +0.5 –0.2 20.2 60 13.0 +0.5 –0.2 20.2 50 13.0 +0.5 –0.2 20.2 60 13.0 +0.5 –0.2 20.2 50 13.0 +0.5 –0.2 20.2 50 13.0 +0.5 –0.2 20.2 60 W1 (MEASURED AT HUB) W1 SMP 21 W2 Max W3 Shall Accommodate Tape Width Without Interference 8.4 +1.5 –0.0 14.4 8.4 +1.5 –0.0 14.4 12.4 +2.0 –0.0 18.4 12.4 +2.0 –0.0 18.4 16.4 +2.0 –0.00 22.4 24.4 +2.0 –0.00 30.4 Note 1: All dimensions in millimeters. Note 2: See Table 1 for tape width and reel diameter of specific packages. 7 TAPE AND REEL Tape and Reel Specifications—TO-92 TO-92 Tape Dimension P0 W1 H F1 F2 P1 P2 H1 S W H4 D TO-92 01 P TO-92 Reel Dimensions Table 1 Symbol Description Dimension (mm) D Sprocket Hole Diameter 4 ± 0.2 H Length from Seating Plane 16 ± 0.5 H1 Sprocket Hole Location 9 ± 0.5 H4 Component Base Height P Sprocket Hole Pitch 12.7 ± 0.2 20 Max P0 Pitch of Component 12.7 ± 0.5 P1 Lead Location 3.85 ± 0.5 P2 Center of Seating Plane Location 6.35 ± 0.4 S Component Lead Spacing 5 +0.8/–0.2 W Carrier Tape Width 18 +1, –0.5 W1 Adhesive Tape Width F1, F2 8 Lead-to-Lead Distance 356mm TYP 30.5mm TYP 6.0 ± 1.0 2.5 +0.4, –0.1 TO-92 02 TAPE AND REEL Tape and Reel Specifications—TO-92 Reel Pak Tape Orientation on Reel Ammo Pak Tape Orientation Inside Box TRAILER ADHESIVE TAPE LID LABELS ON THIS SIDE OF BOX BOX FEED DIRECTION TO-92 03 TO-92 F05 SIDE WITH ADHESIVE TAPE STARTER Package Orientation on Tape STYLE E: Standard Flow TR (Flat Side of Package Faces Toward the Adhesive Tape) STYLE A: Special Flow TRA (Rounded Side of Package Faces Toward the Adhesive Tape) ADHESIVE TAPE ADHESIVE TAPE CARRIER TAPE CARRIER TAPE TO-92 06 TO-92 07 REV M 0116 9