RB160MM-40TF : Diodes

Schottky Barrier Diode
Datasheet
RB160MM-40TF
Application
AEC-Q101 Qualified
Land Size Figure (Unit : mm)
Dimensions (Unit : mm)
General rectification
0.1±0.1
0.05
1.2
Features
1) Small power mold type
3.05
3.5±0.2
0.12
2.6±0.1
0.85
1.6±0.1
PMDU
(PMDU)
2) High reliability
0.8±0.1
ROHM : PMDU
JEDEC : SOD-123FL
3) Low VF
Cathode
Structure
0.9±0.1
: Manufacture Date
Anode
Taping Dimensions (Unit : mm)
1.81±0.1
4.0±0.1
0.25±0.05
3.71±0.1
φ1.55±0.05
1.550.05
2.0±0.05
3.5±0.05
4.0±0.1
8.0±0.2
Silicon epitaxial planar type
1.75±0.1
Construction
φ1.0±0.1
1.00.1
1.5MAX
Absolute Maximum Ratings (Tc= 25°C)
Symbol
Conditions
Limits
Unit
Repetitive Peak Reverse Voltage
VRM
Duty≦0.5
40
V
Reverse Voltage
VR
Direct Reverse Voltage
40
V
Average Forward Rectified Current
Io
60Hz half sin Wave
1
A
Non-repetitive Forward Current Surge Peak
IFSM
60Hz half sin wave ,Non-repetitive at Ta=25°C
30
A
Tj
-
150
°C
Tstg
-
40 to 150
°C
Parameter
Operating Junction Temperature
Storage Temperature
Electrical Characteristics (Tj = 25°C)
Parameter
Symbol
Conditions
Min.
Forward Voltage
VF1
IF=1.0A
-
0.46 0.51
V
Reverse Current
IR
VR=40V
-
4.0
A
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/5
Typ. Max. Unit
30
2015.07 - Rev.A
Data Sheet
RB160MM-40TF
Electrical Characteristic Curves
100000
1
REVERSE CURRENT : IR(A)
FORWARD CURRENT : IF(A)
Tj = 150°C
Tj = 125°C
0.1
Tj = 75°C
Tj = 25°C
0.01
Tj = 25°C
1000
Tj = 125°C
100
Tj = 75°C
10
1
Tj = 25°C
0.1
Tj = 25°C
0.01
0.001
0.001
0
100
200
300
400
500
0
600
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
10
20
30
40
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
1000
480
Tj = 25°C
f = 1MHz
FORWARD VOLTAGE : VF(mV)
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
Tj = 150°C
10000
100
10
0
10
20
470
465
460
AVE. : 454.4mV
455
450
445
440
30
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Tj=25°C
IF=1.0A
n=30pcs
475
VF DISPERSION MAP
2/5
2015.07 - Rev.A
Data Sheet
RB160MM-40TF
Electrical Characteristic Curves
310
Tj=25°C
VR=40V
n=30pcs
35
30
25
20
15
10
AVE. : 2.9A
300
295
290
285
275
0
270
IR DISPERSION MAP
Ct DISPERSION MAP
35
IFSM
300
1cyc
8.3ms
Ta=25°C
250
200
AVE. : 83A
100
50
REVERSE RECOVERY TIME : trr(ns)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
400
150
AVE. : 280pF
280
5
350
Tj=25°C
f=1MHz
VR=0V
n=10pcs
305
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
REVERSE CURRENT : IR(A)
40
0
Tj=25°C
IF=0.5A
IR=1A
Irr / IR=0.25
n=10pcs
30
25
20
15
AVE. : 10.4ns
10
5
0
IFSM DISPERSION MAP
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
trr DISPERSION MAP
3/5
2015.07 - Rev.A
Data Sheet
RB160MM-40TF
Electrical Characteristic Curves
1000
IFSM
PEAK SURGE
FORWARD CURRENT : IFSM(A)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
1000
8.3 8.3
ms ms
1cyc
Ta=25°C
100
time
Ta=25°C
100
10
10
1
10
1
100
NUMBER OF CYCLES
IFSM-CYCLE
10
100
TIME : t(ms)
IFSM-t CHARACTERISTICS
1
1
Tj = 150°C
REVERSE POWER
DISPERSION : PR (W)
Tj = 150°C
FORWARD POWER
DISPERSION : PF (W)
1cyc
IFSM
D = 1/2
Sin(θ=180)
0.5
DC
0.5
Sin(θ=180)
D = 1/2
DC
0
0
0
0.5
1
1.5
0
2
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-PF CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
10
20
30
40
REVERSE VOLTAGE : VR(V)
VR-PR CHARACTERISTICS
4/5
2015.07 - Rev.A
Data Sheet
RB160MM-40TF
Electrical Characteristic Curves
4
Rth(j-a)
100
Rth(j-c)
10
Mounted on glass epoxy board
IM=100mA
IF=1A
1
time
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
TRANSIENT
THERMAL IMPEDANCE : Rth (°C/W)
1000
IO
0A
0V
3
D=t/T
VR=VRM/2
Tj=150°C
T
DC
2
D = 1/2
1
Sin(θ=180)
1ms 300s
0.1
0.001
0
0.01
0.1
1
10
100
0
1000
TIME : t(s)
Rth-t CHARACTERISTICS
25
50
75
100
125
150
AMBIENT TEMPERATURE : Ta(°C)
DERATING CURVE (Io-Ta)
30
4
No destruction at 30kV
IO
0A
0V
3
ELECTROSTATIC
DISCHARGE TEST : ESD(kV)
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
t
VR
t
VR
D=t/T
VR=VRM/2
Tj=150°C
T
DC
2
D = 1/2
1
Sin(θ=180)
0
25
20
15
AVE. : 7.3kV
10
5
0
0
25
50
75
100
125
150
CASE TEMPERATURE : Tc(°C)
DERATING CURVE (Io-Tc)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
C=200pF
R=0
C=100pF
R=1.5k
ESD DISPERSION MAP
5/5
2015.07 - Rev.A
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A