RB520VM-30 : Diodes

Schottky Barrier Diode
Data Sheet
RB520VM-30
lApplication
lDimensions (Unit : mm)
General rectification
1.25±0.1
lLand size figure (Unit : mm)
0.1±0.1
0.05
0.9
0.8
(1)
1.7±0.1
1) Ultra small mold type (UMD2)
2.5±0.2
2.1
lFeatures
2) High reliability
UMD2
3) Low VF
(2)
(1) Cathode
0.3±0.05
lConstruction
Silicon epitaxial planar type
lStructure
0.7±0.2
0.1
: Manufacture date
ROHM : UMD2
JEDEC :SOD-323
JEITA : SC-90/A
(2) Anode
lTaping specifications (Unit : mm)
4.0±0.1
1.0
4.0±0.1
2.8±0.1
5.5±0.2
+0.1
1.4 -0.05
0.25±0.05
8.0±0.2
+0.1
-0
3.5±0.05 1.75±0.1
1.5
2.0±0.05
+0.2
-0
1.5 MAX
lAbsolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits
Unit
Repetitive peak reverse voltage
VRM
Duty≦0.5
30
V
Reverse voltage
VR
Direct reverse voltage
30
V
Average forward rectified current
Io
Glass epoxy board mounted, 60Hz half sin wave,
200
mA
1
A
Non-repetitive forward current surge peak
IFSM
Tj
-
150
°C
Tstg
-
-55 to +150
°C
Operating junction temperature
Storage temperature
resistive load
60Hz half sin wave, Non-repetitive at
Ta=25ºC , 1cycle
lElectrical Characteristics (Tj= 25°C)
Parameter
Forward voltage
Reverse current
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
Symbol
Conditions
Min.
VF1
IF=100mA
-
-
0.51
V
VF2
IF=200mA
-
-
0.58
V
IR
VR=10V
-
-
1
mA
1/5
Typ. Max. Unit
2015.05 - Rev.A
Data Sheet
RB520VM-30
lElectrical Characteristic Curves
10000
1000
REVERSE CURRENT : IR (mA)
FORWARD CURRENT : IF (mA)
Tj = 150°C
100
Tj = 125°C
10
Tj = 75°C
Tj = 25°C
1
Tj = -25°C
100
Tj = 125°C
10
Tj = 75°C
1
Tj = 25°C
0.1
0.01
Tj = -25°C
0.001
0.1
0
0
100 200 300 400 500 600 700 800 900
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
10
20
30
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
550
100
Tj = 25°C
f = 1MHz
FORWARD VOLTAGE : VF (mV)
CAPACITANCE BETWEEN
TERMINALS : Ct (pF)
Tj = 150°C
1000
10
1
Tj=25°C
IF=200mA
n=30pcs
540
530
520
510
Ave. : 491.6mV
500
490
480
470
0
5
10
15
20
25
30
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
VF DISPERSION MAP
2/5
2015.05 - Rev.A
Data Sheet
RB520VM-30
lElectrical Characteristic Curves
38
Tj=25°C
VR=10V
n=30pcs
3.5
3.0
2.5
2.0
1.5
1.0
Ave. : 0.24mA
36
35
34
33
31
0.0
30
IR DISPERSION MAP
Ct DISPERSION MAP
40
9
IFSM
1cyc
8.3ms
Ta=25°C
7
6
Ave. : 3.4A
4
3
2
1
REVERSE RECOVERY TIME : trr (ns)
PEAK SURGE
FORWARD CURRENT : IFSM (A)
10
5
Ave. : 31.7pF
32
0.5
8
Tj=25°C
f=1MHz
VR=0V
n=10pcs
37
CAPACITANCE BETWEEN
TERMINALS : Ct (pF)
REVERSE CURRENT : IR (mA)
4.0
0
Tj=25°C
IF=0.1A
IR=0.1A
Irr / IR=0.10
n=10pcs
35
30
25
20
15
Ave. : 6.7ns
10
5
0
IFSM DISPERSION MAP
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
trr DISPERSION MAP
3/5
2015.05 - Rev.A
Data Sheet
RB520VM-30
lElectrical Characteristic Curves
10
PEAK SURGE
FORWARD CURRENT : IFSM (A)
10
PEAK SURGE
FORWARD CURRENT : IFSM (A)
IFSM
8.3 8.3
ms ms
1cyc
Ta=25°C
1
1cyc
IFSM
time
Ta=25°C
1
1
10
100
1
10
100
TIME : t (ms)
IFSM-t CHARACTERISTICS
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
0.25
0.06
Tj = 150°C
0.05
0.20
REVERSE POWER
DISSIPATION : PR (W)
FORWARD POWER
DISSIPATION : PF (W)
Tj = 150°C
D = 1/2
0.15
Sin(θ=180)
0.10
DC
0.05
0.04
0.03
Sin(θ=180)
D = 1/2
0.02
DC
0.01
0.00
0.00
0
100
200
300
400
0
AVERAGE RECTIFIED
FORWARD CURRENT : Io (mA)
Io-PF CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
10
20
30
REVERSE VOLTAGE : VR (V)
VR-PR CHARACTERISTICS
4/5
2015.05 - Rev.A
Data Sheet
RB520VM-30
lElectrical Characteristic Curves
600
Rth(j-a)
Rth(j-c)
100
Glass epoxy board mounted
IM=10mA
PF=0.3W
time
AVERAGE RECTIFIED
FORWARD CURRENT : Io (mA)
TRANSIENT
THERMAL IMPEDANCE : Rth (°C/W)
1000
500
VR
t
D=t/T
VR=VRM/2
Tj=150°C
T
400
DC
300
D = 1/2
200
Sin(θ=180)
100
1ms 300ms
10
0.001
0
0.01
0.1
1
10
100
0
1000
25
50
75
100
125
150
AMBIENT TEMPERATURE : Ta (°C)
DERATING CURVE (Io-Ta)
TIME : t (s)
Rth-t CHARACTERISTICS
30
IO
0A
0V
500
VR
400
T
DC
300
t
D=t/T
VR=VRM/2
Tj=150°C
D = 1/2
200
Sin(θ=180)
100
ELECTROSTATIC
DISCHARGE TEST : ESD (kV)
600
AVERAGE RECTIFIED
FORWARD CURRENT : Io (mA)
IO
0A
0V
25
Ave. : 18.6kV
20
15
10
Ave. : 2.4kV
5
0
0
0
25
50
75
100
125
150
CASE TEMPERATURE : Tc (°C)
DERATING CURVE (Io-Tc)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
C=200pF
R=0W
C=100pF
R=1.5kW
ESD DISPERSION MAP
5/5
2015.05 - Rev.A
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A