RB088NS100 : Diode

Schottky Barrier Diode
Data Sheet
RB088NS100
lApplication
lDimensions (Unit : mm)
Switching power supply
lLand Size Figure (Unit : mm)
11
2.5
(2)
2.5
1
(1)
3.5
1) Cathode common type
2) High reliability
16
lFeatures
8.5
9.9
RB088
NS100
(3)
2.54
2.54
LPDS
3) Super low IR
lStructure
(2) Cathode
ROHM : LPDS
JEITA : TO263S
lConstruction
Silicon epitaxial planar type
: Manufacture Date
1
(1) Anode
(3) Anode
lTaping Dimensions (Unit : mm)
lAbsolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits
Unit
Repetitive peak reverse voltage
VRM
Duty≦0.5
110
V
Reverse voltage
VR
Direct reverse voltage
100
V
Average forward rectified current
Io
Glass epoxy board mounted, 60Hz half sin wave,
10
A
100
A
Non-repetitive forward current surge peak
Operating junction temperature
Storage temperature
IFSM
resistive load, IO/2 per diode, Tc=137ºC Max.
60Hz half sin wave, Non-repetitive at
Ta=25ºC, 1cycle, per diode
Tj
-
150
°C
Tstg
-
-55 to +150
°C
lElectrical and Thermal Characteristics (Tj= 25°C)
Parameter
Symbol
Conditions
Min.
Forward voltage
VF
IF=5A
-
-
0.87
V
Reverse current
IR
VR=100V
-
-
5
mA
Rth(j-c)
Junction to case
-
-
2
°C / W
Thermal resistance
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/5
Typ. Max. Unit
2015.01 - Rev.A
Data Sheet
RB088NS100
lElectrical Characteristic Curves
1000
100
REVERSE CURRENT : IR(mA)
FORWARD CURRENT : IF(A)
Tj = 150°C
Tj = 125°C
10
1
Tj = 75°C
Tj = 25°C
0.1
0.01
Tj = -25°C
Tj = 150°C
100
10
Tj = 125°C
1
Tj = 75°C
0.1
Tj = 25°C
0.01
Tj = -25°C
0.001
0.001
0
200
400
600
0
800 1000 1200 1400
FORWARD VOLTAGE : VF(mV)
VF-IF CHARACTERISTICS
40
60
80
100
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
1000
760
Tj = 25°C
f = 1MHz
FORWARD VOLTAGE : VF(mV)
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
20
100
10
Tj=25°C
IF=5A
n=30pcs
755
750
745
740
Ave. : 731.5mV
735
730
725
720
0
10
20
30
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
VF DISPERSION MAP
2/5
2015.01 - Rev.A
Data Sheet
RB088NS100
lElectrical Characteristic Curves
680
Tj=25°C
VR=100V
n=30pcs
REVERSE CURRENT : IR(nA)
450
400
350
300
250
Ave. : 151nA
200
150
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
500
670
660
Ave. : 650pF
650
100
640
50
IR DISPERSION MAP
Ct DISPERSION MAP
40
450
IFSM
1cyc
400
8.3ms
Ta=25°C
350
300
Ave. : 231A
250
200
150
100
REVERSE RECOVERY TIME : trr(ns)
500
PEAK SURGE
FORWARD CURRENT : IFSM(A)
Tj=25°C
f=1MHz
VR=0V
n=10pcs
50
Tj=25°C
IF=0.5A
IR=1.0A
Irr / IR=0.25
n=10pcs
35
30
25
20
15
Ave. : 11.8ns
10
5
0
IFSM DISPERSION MAP
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
trr DISPERSION MAP
3/5
2015.01 - Rev.A
Data Sheet
RB088NS100
lElectrical Characteristic Curves
1000
1000
PEAK SURGE
FORWARD CURRENT : IFSM(A)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
IFSM
8.3 8.3
ms ms
1cyc
Ta=25°C
100
1cyc
IFSM
time
Ta=25°C
100
1
10
100
1
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
10
100
TIME : t(ms)
IFSM-t CHARACTERISTICS
0.04
16
Tj = 150°C
Tj = 150°C
REVERSE POWER
DISSIPATION : PR (W)
FORWARD POWER
DISSIPATION : PF (W)
14
12
D = 1/2
10
8
Sin(θ=180)
6
DC
4
0.03
0.02
Sin(θ=180)
D = 1/2
0.01
DC
2
0.00
0
0
5
10
15
0
20
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-PF CHARACTERISTICS
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
20
40
60
80
100
REVERSE VOLTAGE : VR(V)
VR-PR CHARACTERISTICS
4/5
2015.01 - Rev.A
Data Sheet
RB088NS100
lElectrical Characteristic Curves
30
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
TRANSIENT
THERMAL IMPEDANCE : Rth (°C/W)
10
Rth(j-a)
Rth(j-c)
1
Glass epoxy board mounted
IM=100mA
IF=5A
time
25
VR
t
T
20
DC
15
D=t/T
VR=VRM/2
Tj=150°C
D = 1/2
10
Sin(θ=180)
5
1ms 300ms
0.1
0.001
0
0.01
0.1
1
10
100
0
1000
TIME : t(s)
Rth-t CHARACTERISTICS
25
50
75
100
125
150
AMBIENT TEMPERATURE : Ta(°C)
DERATING CURVE (Io-Ta)
30
30
IO
0A
0V
25
VR
t
T
20
DC
15
ELECTROSTATIC
DISCHARGE TEST : ESD(kV)
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
IO
0A
0V
D=t/T
VR=VRM/2
Tj=150°C
D = 1/2
10
Sin(θ=180)
5
0
25
20
10
AVE. : 3.9kV
5
0
0
25
50
75
100
125
150
CASE TEMPERATURE : Tc(°C)
DERATING CURVE (Io-Tc)
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
AVE. : 10.9kV
15
C=200pF
R=0W
C=100pF
R=1.5kW
ESD DISPERSION MAP
5/5
2015.01 - Rev.A
Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifications :
3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
R1102A