Part Number: XZMDKVG45S-9 3.2x2.8mm PLCC4 SMD LED Package Schematics Features ● Ideal for indication light on hand held products ● Long life and robust package ● Variety of lens types and color choices available ● Standard Package: 2000pcs/ Reel ● MSL (Moisture Sensitivity Level): 3 ● RoHS compliant. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MDK (AlGaInP) VG (AlGaInP) Unit VF 1.95 2.1 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V 150 mA Reverse Current (Max.) (VR=5V) IR 10 10 uA 75 mW Wavelength of Peak Emission CIE127-2007* (Typ.) (IF=20mA) λP 650 645* 574 574* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) (IF=20mA) λD 630 630* 570 570* nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) △λ 28 20 nm C 35 15 pF VR 5 5 V Forward Current IF 30 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 Power Dissipation PD 75 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 °C Capacitance (Typ.) (VF=0V, f=1MHz) Part Number Emitting Color VG Unit (AlGaInP) Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Storage Temperature MDK (AlGaInP) Operating Characteristics (TA=25°C) Emitting Material Red AlGaInP Green AlGaInP XZMDKVG45S-9 Lens-color Water Clear Luminous Intensity CIE127-2007* (IF=20mA) mcd Wavelength CIE127-2007* λP nm min. typ. 200 55* 317 100* 650 645* 40 40* 79 80* 574 574* Viewing Angle 2θ 1/2 120° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Oct 31,2012 XDSB4903 V3-X Layout: Maggie L. P. 1/5 Part Number: XZMDKVG45S-9 3.2x2.8mm PLCC4 SMD LED Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. Oct 31,2012 XDSB4903 V3-X Layout: Maggie L. P. 2/5 Part Number: XZMDKVG45S-9 3.2x2.8mm PLCC4 SMD LED MDK VG Oct 31,2012 XDSB4903 V3-X Layout: Maggie L. P. 3/5 Part Number: XZMDKVG45S-9 3.2x2.8mm PLCC4 SMD LED LED is recommended for reflow soldering and soldering profile is shown below. The device has a single mounting surface. The device must be mounted according to the specifications. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specification (Units : mm) Reel Dimension Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Oct 31,2012 XDSB4903 V3-X Layout: Maggie L. P. 4/5 Part Number: XZMDKVG45S-9 3.2x2.8mm PLCC4 SMD LED PACKING & LABEL SPECIFICATIONS Oct 31,2012 XDSB4903 V3-X Layout: Maggie L. P. 5/5