SunLED

Part Number: ZMYK80S-2HTA
2.2x1.4mm SURFACE MOUNT LED LAMP
www.SunLED.com
Features
z
Applications
High reliability LED package
z Traffic signaling.
● Ideal for indication light on hand held products
z Backlighting (illuminated advertising , general lighting).
● Long life and robust package
z Interior and exterior automotive lighting.
● Standard Package: 2,000pcs/ Reel
z Substitution of micro incandescent lamps.
● MSL (Moisture Sensitivity Level): 3
z Reading lamps.
● RoHS compliant
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. Steps, exit ways, etc).
z Decorative and entertainment lighting.
z Indoor and outdoor commercial and residential
architectural lighting.
Package Schematics
u
S
L
n
D
E
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
Feb 21, 2014
SDSA9390
V1-Z
Layout: Maggie L.
P. 1/7
Part Number: ZMYK80S-2HTA
2.2x1.4mm SURFACE MOUNT LED LAMP
www.SunLED.com
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
D
E
L
n
u
S
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise
pickup and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
Feb 21, 2014
SDSA9390
V1-Z
Layout: Maggie L.
P. 2/7
Part Number: ZMYK80S-2HTA
2.2x1.4mm SURFACE MOUNT LED LAMP
www.SunLED.com
Part
Number
Dice
ZMYK80S-2HTA
Luminous Intensity
CIE127-2007*
(IF=20mA)
mcd
Lens-color
Yellow (AlGaInP)
Viewing
Angle
2θ 1/2[1]
Code.
min.
max.
N*
120*
200*
P*
200*
300*
Q*
300*
400*
Water Clear
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
* luminous intensity value is in accordance with CIE127-2007 standards.
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Value
Unit
Power dissipation
PD
75
mW
Reverse Voltage
VR
5
V
Junction temperature[1]
TJ
115
°C
Operating Temperature
Top
-40 To +100
°C
Storage Temperature
Tstg
-40 To +115
°C
IF
30
mA
175
mA
3000
V
480
°C/W
DC Forward Current[1]
Peak Forward Current [2]
L
n
D
E
IFM
Electrostatic Discharge Threshold (HBM)
u
S
Thermal Resistance (Junction/ambient) [1]
Rth j-a
Notes:
1. Rth(j-a) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad),
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
Electrical / Optical Characteristics at Ta=25°C
Parameter
Symbol
Wavelength at peak emission CIE127-2007*
IF=20mA
λpeak
Dominant Wavelength CIE127-2007*
IF=20mA
Spectral bandwidth at 50%Φ
REL MAX
Forward Voltage
IF=20mA [Typ.]
IF=20mA
λdom [1]
Value
Code.
Min.
Typ.
Max.
590*
nm
3*
586*
588*
4*
588*
590*
5*
590*
592*
6*
592*
594*
Δλ
20
VF [2]
2.0
Unit
nm
nm
2.5
V
10
uA
Reverse Current (VR = 5V)
IR
Temperature coefficient of λpeak
IF=20mA, -10°C≤ T≤100°C
[Typ.]
TCλpeak
0.13
nm/ °C
Temperature coefficient of λdom
IF=20mA, -10°C≤ T≤100°C
[Typ.]
TCλdom
0.04
nm/ °C
Temperature coefficient of VF
IF=20mA, -10°C≤ T≤100°C
TCV
-1.7
mV/ °C
*Wavelength value is in accordance with CIE127-2007 standards.
Feb 21, 2014
SDSA9390
V1-Z
Layout: Maggie L.
P. 3/7
Part Number: ZMYK80S-2HTA
www.SunLED.com
2.2x1.4mm SURFACE MOUNT LED LAMP
D
E
L
n
u
S
Feb 21, 2014
SDSA9390
V1-Z
Layout: Maggie L.
P. 4/7
Part Number: ZMYK80S-2HTA
2.2x1.4mm SURFACE MOUNT LED LAMP
www.SunLED.com
™ LED is recommended for reflow soldering and soldering profile is shown below.
™ Reel Dimension
D
E
L
n
u
S
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
™ The device has a single mounting surface. The device
must be mounted according to the specifications.
™ Tape Specification (Units : mm)
Feb 21, 2014
SDSA9390
V1-Z
Layout: Maggie L.
P. 5/7
Part Number: ZMYK80S-2HTA
2.2x1.4mm SURFACE MOUNT LED LAMP
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
D
E
L
n
u
S
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes
Feb 21, 2014
SDSA9390
V1-Z
Layout: Maggie L.
P. 6/7
Part Number: ZMYK80S-2HTA
2.2x1.4mm SURFACE MOUNT LED LAMP
www.SunLED.com
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below
Lot Tolerance Percent Defective (LTPD) : 10%
No.
Test Item
Standards
1
Continuous operating test
2
High Temp. operating test
3
Low Temp. operating test
4
High temp. storage test
EIAJ ED-4701/100
(201)
5
Low temp. storage test
EIAJ ED-4701/100
(202)
6
High temp. & humidity storage test
7
High temp. & humidity operating
test
8
Soldering reliability test
9
Thermal shock operating test
10
Thermal shock test
11
Electric Static Discharge (ESD)
12
Vibration test
-
Ta =25°C ,IF = maximum rated current*
1,000 h
0 / 22
Ta = 100°C IF = derated current at 100°C
1,000 h
0 / 22
Ta = -40°C, IF = maximum rated current*
1,000 h
0 / 22
Ta = maximum rated storage temperature
1,000 h
0 / 22
Ta = -40°C
1,000 h
0 / 22
Ta = 60°C, RH = 90%
500 h
0 / 22
Ta = 60°C, RH = 90%
IF = derated current at 60°C
500 h
0 / 22
Moisture soak : 30°C,70% RH, 72h
Preheat : 150~180°C(120s max.)
Soldering temp : 260°C(10s)
2 times
0 / 18
-
Ta = -40°C(15min) ~ 100°C(15min)
IF = derated current at 100°C
1,000 cycles
0 / 22
-
Ta = -40°C(15min) ~ 100°C(15min)
1,000 cycles
0 / 22
C = 100pF , R2 = 1.5KΩ V = 3000V
Once each
Polarity
0 / 22
a = 196m/s² , f = 100~2KHz ,
t = 48min for all xyz axes
4 times
0 / 22
EIAJ ED-4701/100
(101)
-
-
u
S
Test Times / Number of
Cycles
Damaged
Test Condition
L
n
-
EIAJ ED-4701/100
(301)
EIAJ ED-4701/100
(304)
-
D
E
* : Refer to forward current vs. derating curve diagram
Failure Criteria
Items
Symbols
Conditions
Failure Criteria
luminous Intensity
lv
IF = 20mA
Testing Min. Value <Spec.Min.Value x 0.5
Forward Voltage
VF
IF = 20mA
Testing Max. Value ≥Spec.Max.Value x 1.2
Reverse Current
IR
VR = Maximum Rated Reverse Voltage
Testing Max. Value ≥Spec.Max.Value x 2.5
High temp. storage test
Feb 21, 2014
-
-
Occurrence of notable decoloration, deformation and
cracking
SDSA9390
V1-Z
Layout: Maggie L.
P. 7/7