Part Number: ZCBD80S-2HTA 2.2x1.4mm SURFACE MOUNT LED LAMP www.SunLED.com Features z Applications High reliability LED package z Backlighting for tell-tale indicators ● Ideal for indication light on hand held products z Dashboard lighting ● Long life and robust package z Interior lighting (footwell, dome light, accent lighting, etc.) ● Standard Package: 2,000pcs/ Reel z Exterior lighting (turn signals, side markers, CHMSL, etc.) ● MSL (Moisture Sensitivity Level): 3 z Signs and signals ● RoHS compliant z Various applications requiring high temperature rating ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Package Schematics u S L n D E Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. Feb 21,2014 SDSA9392 V1-Z Layout: Maggie L. P. 1/7 Part Number: ZCBD80S-2HTA 2.2x1.4mm SURFACE MOUNT LED LAMP www.SunLED.com Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. D E L n u S 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. Feb 21,2014 SDSA9392 V1-Z Layout: Maggie L. P. 2/7 Part Number: ZCBD80S-2HTA 2.2x1.4mm SURFACE MOUNT LED LAMP www.SunLED.com Part Number Dice ZCBD80S-2HTA Blue (InGaN) Luminous Intensity CIE127-2007* (IF=20mA) mcd Lens-color Water Clear Viewing Angle 2θ 1/2[1] Code. min. max. M* 80* 120* N* 120* 200* P* 200* 300* 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. * luminous intensity value is in accordance with CIE127-2007 standards. Absolute Maximum Ratings at Ta=25°C Parameter Symbol Value Unit Power dissipation PD 80 mW Reverse Voltage VR 5 V Junction temperature[1] TJ 115 °C Top -40 To +100 °C Tstg -40 To +110 °C IF 20 mA IFM 150 mA 250 V 570 °C/W D E L n u S Operating Temperature Storage Temperature DC Forward Current[1] Peak Forward Current [2] Electrostatic Discharge Threshold (HBM) Thermal Resistance (Junction/ambient) [1] Rth j-a Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at Ta=25°C Parameter Symbol Wavelength at peak emission CIE127-2007* Dominant Wavelength CIE127-2007* Spectral bandwidth at 50%Φ REL MAX Forward Voltage IF=20mA IF=20mA IF=20mA [Typ.] IF=20mA Value Code. Min. Typ. λpeak λdom [1] Max. 460* nm 1B* 463* 466* 2A* 466* 469* 2B* 469* 471* 3A* 471* 473* 3B* 473* 475* Δλ 25 VF [2] 3.3 Unit nm nm 4.0 V 50 uA Reverse Current (VR = 5V) IR Temperature coefficient of λpeak IF=20mA, -10°C≤ T≤100°C [Typ.] TCλpeak 0.05 nm/ °C Temperature coefficient of λdom IF=20mA, -10°C≤ T≤100°C [Typ.] TCλdom 0.03 nm/ °C Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C TCV -2.5 mV/ °C *Wavelength value is in accordance with CIE127-2007 standards. Feb 21,2014 SDSA9392 V1-Z Layout: Maggie L. P. 3/7 Part Number: ZCBD80S-2HTA www.SunLED.com 2.2x1.4mm SURFACE MOUNT LED LAMP D E L n u S Feb 21,2014 SDSA9392 V1-Z Layout: Maggie L. P. 4/7 Part Number: ZCBD80S-2HTA 2.2x1.4mm SURFACE MOUNT LED LAMP www.SunLED.com LED is recommended for reflow soldering and soldering profile is shown below. Reel Dimension Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) u S D E The device has a single mounting surface. The device must be mounted according to the specifications. L n Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Feb 21,2014 SDSA9392 V1-Z Layout: Maggie L. P. 5/7 Part Number: ZCBD80S-2HTA 2.2x1.4mm SURFACE MOUNT LED LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Feb 21,2014 SDSA9392 V1-Z Layout: Maggie L. P. 6/7 Part Number: ZCBD80S-2HTA 2.2x1.4mm SURFACE MOUNT LED LAMP www.SunLED.com Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards 1 Continuous operating test 2 High Temp. operating test 3 Low Temp. operating test 4 High temp. storage test EIAJ ED-4701/100 (201) 5 Low temp. storage test EIAJ ED-4701/100 (202) 6 High temp. & humidity storage test 7 High temp. & humidity operating test 8 Soldering reliability test 9 Thermal shock operating test 10 Thermal shock test 11 Electric Static Discharge (ESD) 12 Vibration test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22 Ta = 100°C IF = derated current at 100°C 1,000 h 0 / 22 Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22 Ta = maximum rated storage temperature 1,000 h 0 / 22 Ta = -40°C 1,000 h 0 / 22 Ta = 60°C, RH = 90% 500 h 0 / 22 Ta = 60°C, RH = 90% IF = derated current at 60°C 500 h 0 / 22 Moisture soak : 30°C,70% RH, 72h Preheat : 150~180°C(120s max.) Soldering temp : 260°C(10s) 2 times 0 / 18 - Ta = -40°C(15min) ~ 100°C(15min) IF = derated current at 100°C 1,000 cycles 0 / 22 - Ta = -40°C(15min) ~ 100°C(15min) 1,000 cycles 0 / 22 C = 100pF , R2 = 1.5KΩ V = 250V Once each Polarity 0 / 22 a = 196m/s² , f = 100~2KHz , t = 48min for all xyz axes 4 times 0 / 22 EIAJ ED-4701/100 (101) - - u S Test Times / Number of Cycles Damaged Test Condition L n - EIAJ ED-4701/100 (301) EIAJ ED-4701/100 (304) - D E * : Refer to forward current vs. derating curve diagram Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥Spec.Max.Value x 2.5 High temp. storage test Feb 21,2014 - - Occurrence of notable decoloration, deformation and cracking SDSA9392 V1-Z Layout: Maggie L. P. 7/7