Part Number: RNI12W PHOTOTRANSISTOR Features Package Schematics ● Radial / Through hole package ● Reliable & robust ● Low power consumption ● Available on tape and reel ● RoHS Compliant D E Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. u S L n Electrical / Optical Characteristics at TA=25°C Symbol Parameter Min. Typ. Max. Unit Test Condiction VBR CEO Collector-to-Emitter Breakdown Voltage 30 V IC=100μA Ee=0mW/cm2 VBR ECO Emitter-to-Collector Breakdown Voltage 5 V IE=100μA Ee=0mW/cm2 VCE(SAT) Collector-to-Emitter Saturation Voltage 0.8 V IC=2mA Ee=20mW/cm2 ICEO Collector Dark Current 100 nA VCE=10V Ee=0mW/cm2 TR Rise Time (10% to 90%) 15 μs TF Fall Time (90% to 10%) 15 μs 2.5 mA I(ON) On State Collector Current 0.5 VCE=5V IC=1mA RL=1KΩ VCE=5V Ee=1mW/cm2 λ=940nm Absolute Maximum Ratings at TA=25°C Parameter Maximum Ratings Collector-to-Emitter Voltage 30V Emitter-to-Collector Voltage 5V Power Dissipation at (or below) 25°C Free Air Temperature Operating / Storage Temperature Range Lead Solder Temperature (>5mm for 5sec) Dec 18,2013 100mW -40°C To +85°C 260°C SDSA4752 V6 Layout: Maggie L. P. 1/4 Part Number: RNI12W PHOTOTRANSISTOR D E L n u S Dec 18,2013 SDSA4752 V6 Layout: Maggie L. P. 2/4 Part Number: RNI12W PHOTOTRANSISTOR D E L n u S Dec 18,2013 SDSA4752 V6 Layout: Maggie L. P. 3/4 Part Number: RNI12W PHOTOTRANSISTOR PACKING & LABEL SPECIFICATIONS D E L n u S TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLED.com/TechnicalNotes Dec 18,2013 SDSA4752 V6 Layout: Maggie L. P. 4/4