Easy temperature and humidity control with an SD Card

N EW
Dimensions (unit: mm)
[Logger]
Next-Generation Production Environment Sensors
[Sensor Head]
ZN-THX11-SA
TM
6 Dia.
3.5 Dia.
ZN-THS17-S
Series
<Screw Hook Holes>
44.3
60±0.2
21.3
16
Mounting Screw Holes
2-M3
40
11
Screw Hook Holes
ZN-THS-S (Sensor head)
ZN-THX11-SA (Logger)
59
117.2
Sensor Head Connector
85.9
Mounting Screw Holes
Hole depth 4
Precision Thermo-Humidity Logger
AC Adaptor or DC
Cable Terminal
21.8
49.4
48.6
56.8
Mode Key
Item Selection Key
(Up)
40
60
28.2
11
15
REC/STOP·SET Key
24.6
Reset Switch
0.7
Item Selection Key
(Down)
21
Vinyl Insulated Round Cable 3.4 Dia.
Standard Length 1.5 m
16
16.7
Alarm Output Terminal
3.5 Dia. Mounting Hole
3
Easy temperature and humidity
control with an SD Card
2.4
7.4
52.7
10.8
ZN-THS11-S
SD Card Slot
In addition to Thermo-Humidity Logger…
LAN Connection models also available
Thermo-Humidity Station
Integrated networked monitoring of
temperature and humidity data
Continuous monitoring of production
environments is easy with LAN-connection
models.
Differential Pressure Station
Use to control positive
pressure in clean booths!
Sensor head
LAN connection models are ideal for a wide
variety of continuous-monitoring needs.
LAN connection models feature a built-in LAN
port. Data can be retrieved via a network,
allowing for efficient, integrated control of
equipment and production environment.
Built-in LAN port
Clearly visualize your entire production
environment including temperature,
humidity, airborne particles, dust fallout,
and differential pressure!
∗ Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2011 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
CSM_2_1_1013
Printed in Japan
Cat. No. E409-E1-01
0611 (0611) (TA)
Logger
Meeting the need for “easier management of temper ature and humidity data”
Omron Precision Thermo-Humidity Loggers use sensors with the highest precision in their class and the first SD Card
data collection system.
This enables precise control of temperature and humidity at multiple points along the manufacturing line and more
efficient data collection.
The logger has alarm output providing immediate alerts when trouble occurs, helping meet strict quality control
standards.
t in
Firs
n
llectio
o
c
a
t
a
easy d D Card!
d
n
a
k
S
Quic
single
with a
!
lass
its c
SD Card system makes data
collection more efficient
le!
gly simp
it itself.
ment.
Stunnin
h the un
c
ta
on equip
e
ti
d
c
e
to
ll
o
d
c
e
No ne
r other
for PC o
No need
Data can be collected only when needed by simply inserting an SD Card
Thermo-Humidity Logger memory can store up to approx. 8,500 pieces of data
Measured data is transferred to CSV format and stored in an SD Card
Data continues to be recorded in built-in memory even while data is being
collected onto SD Card
Store data up to maximum memory capacity by keeping SD Card continually inserted
(approx. 17 million pieces of data per 1GB. Store up to five years of data when measurements are made every 10 seconds)
Compact body with useful features!
∗ Photo shows actual size
Large, easy to read
characters!
Easy operation similar to
portable gaming device
Large, easily legible LCD display has two rows
of five characters.
Start recording with the
touch of a single button!
in its
Top
s
clas
n its
rst i
s!
clas
Fi
Remarkably high measurement
accuracy
are
oftw
ed s
undl
B
Alarm output for immediate response
when trouble occurs
Create graphs easily by simply
designating the SD Card drive!
Example: When temperature exceeds threshold value, an error indicator lights up
Temperature
measurement
accuracy
Humidity
measurement
accuracy
± 0.3 °C
± 2.5%
(at 25°C)
(at 25°C,
10 to 85%)
Indicator
nd
re a
atu y
r
e
p
it
Tem Humid lert!
A
r
Erro
Data selection screen
Temperature
resolution
Graph display screen
0.1°C
Precision measurement ensures a temperature resolution of
0.1°C and humidity accuracy of plus/minus 2.5%.
This enables more precise control of temperature and
humidity, which contributes to improvement in product quality.
Runs for approx. 1 year on two
commercial AAA batteries
With built-in backup feature, stored data
won’t be lost even if batteries run out
The logger has an alarm output. Unusual temperature and humidity
are made visible, enabling you to make a quick response and to
make it easy to systemize manufacturing lines.
Specifications
Sensor head
Can also be used
with DC voltage input
or AC adaptor
Item
Logger
Model ZN-THS17-S ZN-THS17C-S∗ ZN-THS11-S ZN-THS11C-S∗
Sensor head: Anchored type
Measurement range
TemperMeasurement precision
ature
Resolution
Measurement range
Relative
humidity Measurement precision
Resolution
Weight (packaged)
Accessories
Calibration service
Model
Item
Sensor head: 1.5 m type
0 to 60°C
–25 to 60°C
Sensor that can be connected Thermo-Humidity Sensor Head (ZN-THS1-S)
Display
±0.3°C (at 25°C)
Measurement interval
0.1°C
Calculation function
Back side features two types of holes,
for wall-hanging and for anchoring
Alarm output terminal
LCD 7-segment 5-digit 2-step display, auxiliary information indicator display
Subject to calibration
Content
Certificate of Calibration, Test Transcript
Traceability chart
ZN-THS17-CAL
Sensor head
1.5 m type
Certificate of Calibration, Test Transcript
Traceability chart
ZN-THS11-CAL
• As the sensor head and station are digitally connected, this calibration service is available only for the sensor head.
• It is necessary to ship the product back to OMRON in Japan.
10 s, 20 s, 30 s, 1 min, 2 min, 5 min, 10 min, 20 min, 30 min, 1 h
Accessaories (Order separately)
Instantaneous value, maximum value, minimum value, average value
Normal mode, sleep mode∗1
±2.5% (at 25°C, 10 to 85%)
Recording mode
Continue∗2, ring∗3
Mounting Magnet∗
0.1%
Alarm signal output∗4
Output to photocoupler (External power supply: 12 to 24 VDC,
Load current: Max. 45 mA) Alarm hold setting is possible.∗5
DC cable (ZN9-ED01-S comes with
ZN-THX11-SA)
Internal memory: Approx. 8,500 data items
SD card (to save measured values and to save/read set values),
Recommended SD card: HMC-SD291 (manufactured by OMRON)∗9
AC Adaptor for ZN-X-S
100 to 240 VAC/50 to 60 Hz
Operating temperature range: 0 to 40°C
Approx. 300 g
Mounting screw (M3 x 8) x 1
Caps to secure cable
Mounting screw (M3 x 8) x 1
(one for each, front and rear)
Internal storage device
External storage device
• As performance may deteriorate through the adhesion of impurities or contaminants in the
environment on the sensor surface, calibration is recommended once a year.
• When ZN-THS1-S is exposed over a long period of time at a high humidity of 80% or
higher, the humidity measurement value may be offset.
In that case, expose the product at room temperature and humidity for 24 hours prior to use.
• When ZN-THS1-S is transferred rapidly between places where temperature difference is
large, condensation may occur on the sensor surface.
In that case, the ZN-THS1-S may not work properly.
When the product becomes wet due to condensation, allow the product to dry in a dry, room
temperature environment before use.
• When using the ZN-THS1-S under conditions with temperatures of –20°C or less or with
humidity of 90% or more, acceleration of sensor deterioration may occur.
• To avoid deterioration of sensor, avoid storing the product under high temperature and high
humidity for a long period of time.
• Please don’t use the product in an environment into which organic chemistry material
disperses.
Power supply voltage
Battery life∗5
DC input: 24 VDC±10%
Battery: 2 AAA batteries∗5
Approx. 1 year∗6 (sleep mode, measurement interval of 10 minutes with
2 AAA nickel metal hydride batteries, with SD card not inserted)
Operating temperature range 0 to 60°C
Operating humidity range
Weight (packaged)
Accessories
Model
Sensor head
Anchored type
Operating mode
0 to 99%
20 to 85%
∗ Please choose this form when you buy it with the calibration certificate.
SD Card slot
ZN-THX11-SA
Appearance
Appearance
∗ In sleep mode. Battery life may vary depending on
production environment and battery type / battery
performance.
∗ Manganese batteries cannot be used.
Easy to hang on wall
as well
Insert the SD card containing collected data into a PC, and
simply designate the drive in order to manage and graph the
recorded data. Measurement data is stored in CSV format,
allowing for easy temperature and humidity data management.
20 to 85% (no condensation)
Approx. 500 g
Instruction Sheet, Startup Guide CD-ROM∗7, Alarm output connector∗8
DC cable (straight type)
Item
Model
ZN9-EM01-S
Straight type
ZN9-ED01-S
Right angle type
ZN9-ED02-S
PSE, CE, UL STD/A-type plug
ZN9-ACP01-S
∗ When the magnet is used, the vibration resistance becomes 55 Hz or less. (Two logger installation screws are attached.)
∗1 Power saving mode. The indicator is always OFF in default setting. (Turns ON with button operation.)
∗2 Automatically writes data to the SD card when reaching the upper limit of the internal memory and keeps recording
until the capacity limit of the SD card. If the SD card is not inserted when the internal memory reaches the upper
limit, recording stops. (Data can be output to the SD card by pressing the button after inserting the SD card.)
∗3 This mode always records the latest measured values for the upper limit of the internal memory. (When the
measured values exceed the upper limit of the internal memory, the data items will be deleted beginning with the
oldest data item.)
∗4 An alarm is shown when exceeding the upper limit value or lower limit value that has been set in threshold setting mode.
∗5 Nickel hydride battery and alkaline battery can be used. Manganese batteries cannot be used.
∗6 Battery life differs depending on measurement environment, sampling, operating mode, battery type, or
performance.
∗7 System requirements
OS: Windows XP/Windows Vista/Windows 7 (64 Bit not supported)
CPU: compatible Intel processors,1 GHz or higher.
Memory: 1 GB or more (2 GB or more recommended)
∗8 The connector is type XW4B-02B1-H1, made by OMRON.
∗9 If you use an SD card from another manufacturer, use an SDHC Class 4 or higher card. (You must confirm the
operation of the SD card yourself.)
Meeting the need for “easier management of temper ature and humidity data”
Omron Precision Thermo-Humidity Loggers use sensors with the highest precision in their class and the first SD Card
data collection system.
This enables precise control of temperature and humidity at multiple points along the manufacturing line and more
efficient data collection.
The logger has alarm output providing immediate alerts when trouble occurs, helping meet strict quality control
standards.
t in
Firs
n
llectio
o
c
a
t
a
easy d D Card!
d
n
a
k
S
Quic
single
with a
!
lass
its c
SD Card system makes data
collection more efficient
le!
gly simp
it itself.
ment.
Stunnin
h the un
c
ta
on equip
e
ti
d
c
e
to
ll
o
d
c
e
No ne
r other
for PC o
No need
Data can be collected only when needed by simply inserting an SD Card
Thermo-Humidity Logger memory can store up to approx. 8,500 pieces of data
Measured data is transferred to CSV format and stored in an SD Card
Data continues to be recorded in built-in memory even while data is being
collected onto SD Card
Store data up to maximum memory capacity by keeping SD Card continually inserted
(approx. 17 million pieces of data per 1GB. Store up to five years of data when measurements are made every 10 seconds)
Compact body with useful features!
∗ Photo shows actual size
Large, easy to read
characters!
Easy operation similar to
portable gaming device
Large, easily legible LCD display has two rows
of five characters.
Start recording with the
touch of a single button!
in its
Top
s
clas
n its
rst i
s!
clas
Fi
Remarkably high measurement
accuracy
are
oftw
ed s
undl
B
Alarm output for immediate response
when trouble occurs
Create graphs easily by simply
designating the SD Card drive!
Example: When temperature exceeds threshold value, an error indicator lights up
Temperature
measurement
accuracy
Humidity
measurement
accuracy
± 0.3 °C
± 2.5%
(at 25°C)
(at 25°C,
10 to 85%)
Indicator
nd
re a
atu y
r
e
p
it
Tem Humid lert!
A
r
Erro
Data selection screen
Temperature
resolution
Graph display screen
0.1°C
Precision measurement ensures a temperature resolution of
0.1°C and humidity accuracy of plus/minus 2.5%.
This enables more precise control of temperature and
humidity, which contributes to improvement in product quality.
Runs for approx. 1 year on two
commercial AAA batteries
With built-in backup feature, stored data
won’t be lost even if batteries run out
The logger has an alarm output. Unusual temperature and humidity
are made visible, enabling you to make a quick response and to
make it easy to systemize manufacturing lines.
Specifications
Sensor head
Can also be used
with DC voltage input
or AC adaptor
Item
Logger
Model ZN-THS17-S ZN-THS17C-S∗ ZN-THS11-S ZN-THS11C-S∗
Sensor head: Anchored type
Measurement range
TemperMeasurement precision
ature
Resolution
Measurement range
Relative
humidity Measurement precision
Resolution
Weight (packaged)
Accessories
Calibration service
Model
Item
Sensor head: 1.5 m type
0 to 60°C
–25 to 60°C
Sensor that can be connected Thermo-Humidity Sensor Head (ZN-THS1-S)
Display
±0.3°C (at 25°C)
Measurement interval
0.1°C
Calculation function
Back side features two types of holes,
for wall-hanging and for anchoring
Alarm output terminal
LCD 7-segment 5-digit 2-step display, auxiliary information indicator display
Subject to calibration
Content
Certificate of Calibration, Test Transcript
Traceability chart
ZN-THS17-CAL
Sensor head
1.5 m type
Certificate of Calibration, Test Transcript
Traceability chart
ZN-THS11-CAL
• As the sensor head and station are digitally connected, this calibration service is available only for the sensor head.
• It is necessary to ship the product back to OMRON in Japan.
10 s, 20 s, 30 s, 1 min, 2 min, 5 min, 10 min, 20 min, 30 min, 1 h
Accessaories (Order separately)
Instantaneous value, maximum value, minimum value, average value
Normal mode, sleep mode∗1
±2.5% (at 25°C, 10 to 85%)
Recording mode
Continue∗2, ring∗3
Mounting Magnet∗
0.1%
Alarm signal output∗4
Output to photocoupler (External power supply: 12 to 24 VDC,
Load current: Max. 45 mA) Alarm hold setting is possible.∗5
DC cable (ZN9-ED01-S comes with
ZN-THX11-SA)
Internal memory: Approx. 8,500 data items
SD card (to save measured values and to save/read set values),
Recommended SD card: HMC-SD291 (manufactured by OMRON)∗9
AC Adaptor for ZN-X-S
100 to 240 VAC/50 to 60 Hz
Operating temperature range: 0 to 40°C
Approx. 300 g
Mounting screw (M3 x 8) x 1
Caps to secure cable
Mounting screw (M3 x 8) x 1
(one for each, front and rear)
Internal storage device
External storage device
• As performance may deteriorate through the adhesion of impurities or contaminants in the
environment on the sensor surface, calibration is recommended once a year.
• When ZN-THS1-S is exposed over a long period of time at a high humidity of 80% or
higher, the humidity measurement value may be offset.
In that case, expose the product at room temperature and humidity for 24 hours prior to use.
• When ZN-THS1-S is transferred rapidly between places where temperature difference is
large, condensation may occur on the sensor surface.
In that case, the ZN-THS1-S may not work properly.
When the product becomes wet due to condensation, allow the product to dry in a dry, room
temperature environment before use.
• When using the ZN-THS1-S under conditions with temperatures of –20°C or less or with
humidity of 90% or more, acceleration of sensor deterioration may occur.
• To avoid deterioration of sensor, avoid storing the product under high temperature and high
humidity for a long period of time.
• Please don’t use the product in an environment into which organic chemistry material
disperses.
Power supply voltage
Battery life∗5
DC input: 24 VDC±10%
Battery: 2 AAA batteries∗5
Approx. 1 year∗6 (sleep mode, measurement interval of 10 minutes with
2 AAA nickel metal hydride batteries, with SD card not inserted)
Operating temperature range 0 to 60°C
Operating humidity range
Weight (packaged)
Accessories
Model
Sensor head
Anchored type
Operating mode
0 to 99%
20 to 85%
∗ Please choose this form when you buy it with the calibration certificate.
SD Card slot
ZN-THX11-SA
Appearance
Appearance
∗ In sleep mode. Battery life may vary depending on
production environment and battery type / battery
performance.
∗ Manganese batteries cannot be used.
Easy to hang on wall
as well
Insert the SD card containing collected data into a PC, and
simply designate the drive in order to manage and graph the
recorded data. Measurement data is stored in CSV format,
allowing for easy temperature and humidity data management.
20 to 85% (no condensation)
Approx. 500 g
Instruction Sheet, Startup Guide CD-ROM∗7, Alarm output connector∗8
DC cable (straight type)
Item
Model
ZN9-EM01-S
Straight type
ZN9-ED01-S
Right angle type
ZN9-ED02-S
PSE, CE, UL STD/A-type plug
ZN9-ACP01-S
∗ When the magnet is used, the vibration resistance becomes 55 Hz or less. (Two logger installation screws are attached.)
∗1 Power saving mode. The indicator is always OFF in default setting. (Turns ON with button operation.)
∗2 Automatically writes data to the SD card when reaching the upper limit of the internal memory and keeps recording
until the capacity limit of the SD card. If the SD card is not inserted when the internal memory reaches the upper
limit, recording stops. (Data can be output to the SD card by pressing the button after inserting the SD card.)
∗3 This mode always records the latest measured values for the upper limit of the internal memory. (When the
measured values exceed the upper limit of the internal memory, the data items will be deleted beginning with the
oldest data item.)
∗4 An alarm is shown when exceeding the upper limit value or lower limit value that has been set in threshold setting mode.
∗5 Nickel hydride battery and alkaline battery can be used. Manganese batteries cannot be used.
∗6 Battery life differs depending on measurement environment, sampling, operating mode, battery type, or
performance.
∗7 System requirements
OS: Windows XP/Windows Vista/Windows 7 (64 Bit not supported)
CPU: compatible Intel processors,1 GHz or higher.
Memory: 1 GB or more (2 GB or more recommended)
∗8 The connector is type XW4B-02B1-H1, made by OMRON.
∗9 If you use an SD card from another manufacturer, use an SDHC Class 4 or higher card. (You must confirm the
operation of the SD card yourself.)
N EW
Dimensions (unit: mm)
[Logger]
Next-Generation Production Environment Sensors
[Sensor Head]
ZN-THX11-SA
TM
6 Dia.
3.5 Dia.
ZN-THS17-S
Series
<Screw Hook Holes>
44.3
60±0.2
21.3
16
Mounting Screw Holes
2-M3
40
11
Screw Hook Holes
ZN-THS-S (Sensor head)
ZN-THX11-SA (Logger)
59
117.2
Sensor Head Connector
85.9
Mounting Screw Holes
Hole depth 4
Precision Thermo-Humidity Logger
AC Adaptor or DC
Cable Terminal
21.8
49.4
48.6
56.8
Mode Key
Item Selection Key
(Up)
40
60
28.2
11
15
REC/STOP·SET Key
24.6
Reset Switch
0.7
Item Selection Key
(Down)
21
Vinyl Insulated Round Cable 3.4 Dia.
Standard Length 1.5 m
16
16.7
Alarm Output Terminal
3.5 Dia. Mounting Hole
3
Easy temperature and humidity
control with an SD Card
2.4
7.4
52.7
10.8
ZN-THS11-S
SD Card Slot
In addition to Thermo-Humidity Logger…
LAN Connection models also available
Thermo-Humidity Station
Integrated networked monitoring of
temperature and humidity data
Continuous monitoring of production
environments is easy with LAN-connection
models.
Differential Pressure Station
Use to control positive
pressure in clean booths!
Sensor head
LAN connection models are ideal for a wide
variety of continuous-monitoring needs.
LAN connection models feature a built-in LAN
port. Data can be retrieved via a network,
allowing for efficient, integrated control of
equipment and production environment.
Built-in LAN port
Clearly visualize your entire production
environment including temperature,
humidity, airborne particles, dust fallout,
and differential pressure!
∗ Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2011 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
CSM_2_1_1013
Printed in Japan
Cat. No. E409-E1-01
0611 (0611) (TA)
Logger