omron.com

Lighting System
3Z4S-LT Series
Datasheet
This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must
understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69-2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2009 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
Cat. No. Q164-E1-01
0708
����������������������� �
������������������������������������������
�������������������������������
�
�����������������������������������������������������������������������������������������
�����������������������������������������������������������������������������������
����������������������������������������������������������������������������������������
���������������������������������������������������������������������������������������
�������������������������������������������������
�����������������������������������������������������������������������������������������
�������������������������������������������������������
�����������������������������������������������������������������������
����������������������������
Index
Strobe Controller
P4
Direct Ring Light
P6
Low Angle Ring Light
P7
Coaxial Light/Simulated Coaxial Episcopic Light
P8
Shadowless Light
P9
Bar Light/Line Light
P10
Dome Light
High-powered Spot LED Light
IR Light
P12
Direct Backlight
P13
Edge-type Backlight
P14
Square Oblique Light
P15
UV Light
P16
Spot LED Light
Parallel Light
CCTV Lens
CCTV Lens Option
Non-telecentric Macro Lens
2
P11
P17
P18
P19
New Power Supplies for MCEP/MSPP Series
P20
New Power Supplies for MG-Wave Series
P22
Optional Accessories
P25
3
®
Next-generation MG-Wave
LED Illumination Combines with the Vision
Sensor to Provide New Solutions
Illumination Devices are essential for finding solutions to many of the image-processing
tasks of Vision Sensors. With this in mind, we have now combined advanced MG-Wave®
LED Illumination from the broad Moritex range of original and innovative products based
on superior illumination technologies with Vision Sensor image-processing technologies
and know-how accumulated over the years by OMRON.
This powerful collaboration has yielded a variety of optimal solutions to inspection and
measurement needs in automated production applications.
A wide range of products allows you to select the optimal Illumination
Device for each application.
2
Index
Direct Ring Light
P4
Low Angle Ring Light
P5
Coaxial Light/Simulated Coaxial Episcopic Light
P6
Shadowless Light
P7
Bar Light/Line Light
P8
Dome Light
High-powered Spot LED Light
P9
IR Light
P10
Direct Backlight
P11
Edge-type Backlight
P12
Square Oblique Light
P13
Spot LED Light
Parallel Light
P14
New Power Supplies for MCEP/MSPP Series
P16
New Power Supplies for MG-Wave Series
P18
Optional Accessories
P21
3
MDRL
Direct Ring Light
Series
Low Angle Ring Light
Low Angle Ring Light
Direct Ring Light
Model Number Legend
3Z4S-LT MDRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
MLRL
Series
Model Number Legend
3Z4S-LT MLRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
Model
Dimension
MDRL-CR10
A
Liminescent Color
Max. rated current IFM (A)
Red
0.11
MDRL-CB10
A
Blue
0.17
MDRL-CW10
A
White
0.17
MDRL-CR16
B
Red
0.24
MDRL-CB16
B
Blue
0.37
MDRL-CW16
B
White
0.37
Weight (g)
Power supply
Connection to strobe controller
080
080
50
080
List of Models
080
080
65
080
080
MDRL-CR28
C
Red
0.20
MDRL-CB28
C
Blue
0.31
MDRL-CW28
C
White
0.31
MDRL-CR31
D
Red
0.36
MDRL-CB31
D
Blue
0.55
MDRL-CW31
D
White
0.55
080
MDRL-CR35
E
Red
0.34
MDRL-CB35
E
Blue
0.52
MDRL-CW35
E
White
MDRL-CR36
F
MDRL-CB36
Model
080
65
Dimension
MLRL-CR25
A
MLRL-CB25
MLRL-CW25
Liminescent Color
Max. rated current IFM (A)
Red
0.15
A
Blue
0.24
A
White
0.24
MLRL-CR46
B
Red
0.17
080
MLRL-CB46
B
Blue
0.27
080
MLRL-CW46
B
White
0.27
0.52
080
MLRL-CR48
C
Red
0.30
Red
0.36
080
MLRL-CB48
C
Blue
0.47
F
Blue
0.55
080
MLRL-CW48
C
White
MDRL-CW36
F
White
0.55
080
0.47
MDRL-CR50
G
Red
0.64
080
MLRL-CR68
D
Red
0.57
MDRL-CB50
G
Blue
0.96
230
MLRL-CB68
D
Blue
0.61
MDRL-CW50
G
White
0.96
230
MLRL-CW68
D
White
0.61
MDRL-CR56
H
Red
1.12
230
MLRL-CR100
E
Red
0.96
MDRL-CB56
H
Blue
1.55
230
MLRL-CB100
E
Blue
1.03
MDRL-CW56
H
White
1.55
230
MLRL-CW100
E
White
1.03
080
080
080
130
150
120
180
520
Weight (g)
Power supply
Connection to strobe controller
080
080
70
080
080
080
80
080
080
080
110
080
080
080
190
080
230
230
320
230
The MDRL-C*35 provides perpendicular illumination to enable a long working distance.
The recommended working distance is 65 mm or longer, but if a reflective surface is being illuminated, the working distance can be as long as 200 mm.
Options
Diffusion and Polarizing plates are available to prevent the vignetting of image.
For detail,
Options
Good for producing more uniform illumination than with direct lighting and for reducing glare and reflections.
See “Adapter: MAD Series” on page 21.
Diffusion ring
Dimensions
40 dia.
28 dia.
D(MDRL-C 31)
66 dia.
50 dia.
31 dia.
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
MLRL-C (R,G,B,W) 48
MDF-LR68
MLRL-C (R,G,B,W) 68
MDF-LR100
MLRL-C (R,G,B,W) 100
B (MLRL-C 46)
50 dia.
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
38 dia.
25 dia.
C (MLRL-C 48)
Four, M3 mounting holes with
a depth of 5 mm equally
spaced along circumference
75 dia.
56 dia.
46 dia.
60 dia.
48 dia.
°
22
Standard cable length: 500 mm
Four, M3 mounting holes with
a depth of 5 mm equally
divided along circumference
10
100 dia.
84 dia.
E (MLRL-C 100)
140 dia.
Four, M3 mounting holes with a depth of 5 mm
equally spaced along circumference
68 dia.
125 dia.
100 dia.
24
D (MLRL-C 68)
90
Mounting hole position: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
Mounting hole locations: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
4
74 dia.
19
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
18.5
120 dia.
90 dia.
56 dia.
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
11.5
H(MDRL-C 56)
31.5
17
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
5.5
4.5
50 dia.
36 dia.
90 dia.
70 dia.
50 dia.
20
66 dia.
Four, M3 mounting
holes with a depth of
3 mm equally divided
along circumference
G(MDRL-C 50)
7.5
F(MDRL-C 36)
22
70 dia.
35 dia.
Four, M3 mounting holes with
a depth of 5 mm equally
spaced along circumference
on top surface PCD 50
MDF-LR48
Dimensions
A (MLRL-C 25)
E (MDRL-C 35)
Applicable model
MLRL-C (R,G,B,W) 25
20
16
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
8.5
48 dia.
38 dia.
16 dia.
50 dia.
4
C(MDRL-CR28)
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
15
10 dia.
B(MDRL-C 16)
16
20 dia.
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
5
32 dia.
4.5
A (MDRL-C 10)
Model
MDF-LR25
Standard cable length: 500 mm
5
MDRL
Direct Ring Light
Series
Low Angle Ring Light
Low Angle Ring Light
Direct Ring Light
Model Number Legend
3Z4S-LT MDRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
MLRL
Series
Model Number Legend
3Z4S-LT MLRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
Model
Dimension
MDRL-CR10
A
Liminescent Color
Max. rated current IFM (A)
Red
0.11
MDRL-CB10
A
Blue
0.17
MDRL-CW10
A
White
0.17
MDRL-CR16
B
Red
0.24
MDRL-CB16
B
Blue
0.37
MDRL-CW16
B
White
0.37
Weight (g)
Power supply
Connection to strobe controller
080
080
50
080
List of Models
080
080
65
080
080
MDRL-CR28
C
Red
0.20
MDRL-CB28
C
Blue
0.31
MDRL-CW28
C
White
0.31
MDRL-CR31
D
Red
0.36
MDRL-CB31
D
Blue
0.55
MDRL-CW31
D
White
0.55
080
MDRL-CR35
E
Red
0.34
MDRL-CB35
E
Blue
0.52
MDRL-CW35
E
White
MDRL-CR36
F
MDRL-CB36
Model
080
65
Dimension
MLRL-CR25
A
MLRL-CB25
MLRL-CW25
Liminescent Color
Max. rated current IFM (A)
Red
0.15
A
Blue
0.24
A
White
0.24
MLRL-CR46
B
Red
0.17
080
MLRL-CB46
B
Blue
0.27
080
MLRL-CW46
B
White
0.27
0.52
080
MLRL-CR48
C
Red
0.30
Red
0.36
080
MLRL-CB48
C
Blue
0.47
F
Blue
0.55
080
MLRL-CW48
C
White
MDRL-CW36
F
White
0.55
080
0.47
MDRL-CR50
G
Red
0.64
080
MLRL-CR68
D
Red
0.57
MDRL-CB50
G
Blue
0.96
230
MLRL-CB68
D
Blue
0.61
MDRL-CW50
G
White
0.96
230
MLRL-CW68
D
White
0.61
MDRL-CR56
H
Red
1.12
230
MLRL-CR100
E
Red
0.96
MDRL-CB56
H
Blue
1.55
230
MLRL-CB100
E
Blue
1.03
MDRL-CW56
H
White
1.55
230
MLRL-CW100
E
White
1.03
080
080
080
130
150
120
180
520
Weight (g)
Power supply
Connection to strobe controller
080
080
70
080
080
080
80
080
080
080
110
080
080
080
190
080
230
230
320
230
The MDRL-C*35 provides perpendicular illumination to enable a long working distance.
The recommended working distance is 65 mm or longer, but if a reflective surface is being illuminated, the working distance can be as long as 200 mm.
Options
Diffusion and Polarizing plates are available to prevent the vignetting of image.
For detail,
Options
Good for producing more uniform illumination than with direct lighting and for reducing glare and reflections.
See “Adapter: MAD Series” on page 23.
Diffusion ring
Dimensions
40 dia.
28 dia.
D(MDRL-C 31)
66 dia.
50 dia.
31 dia.
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
MLRL-C (R,G,B,W) 48
MDF-LR68
MLRL-C (R,G,B,W) 68
MDF-LR100
MLRL-C (R,G,B,W) 100
B (MLRL-C 46)
50 dia.
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
38 dia.
25 dia.
C (MLRL-C 48)
Four, M3 mounting holes with
a depth of 5 mm equally
spaced along circumference
75 dia.
56 dia.
46 dia.
60 dia.
48 dia.
°
22
Standard cable length: 500 mm
Four, M3 mounting holes with
a depth of 5 mm equally
divided along circumference
10
100 dia.
84 dia.
E (MLRL-C 100)
140 dia.
Four, M3 mounting holes with a depth of 5 mm
equally spaced along circumference
68 dia.
125 dia.
100 dia.
24
D (MLRL-C 68)
90
Mounting hole position: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
Mounting hole locations: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
4
74 dia.
19
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
18.5
120 dia.
90 dia.
56 dia.
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
11.5
H(MDRL-C 56)
31.5
17
Four, M3 mounting holes with
a depth of 4 mm equally
divided along circumference
5.5
4.5
50 dia.
36 dia.
90 dia.
70 dia.
50 dia.
20
66 dia.
Four, M3 mounting
holes with a depth of
3 mm equally divided
along circumference
G(MDRL-C 50)
7.5
F(MDRL-C 36)
22
70 dia.
35 dia.
Four, M3 mounting holes with
a depth of 5 mm equally
spaced along circumference
on top surface PCD 50
MDF-LR48
Dimensions
A (MLRL-C 25)
E (MDRL-C 35)
Applicable model
MLRL-C (R,G,B,W) 25
20
16
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
8.5
48 dia.
38 dia.
16 dia.
50 dia.
4
C(MDRL-CR28)
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
15
10 dia.
B(MDRL-C 16)
16
20 dia.
Four, M3 mounting
holes with a depth of
4 mm equally divided
along circumference
5
32 dia.
4.5
A (MDRL-C 10)
Model
MDF-LR25
Standard cable length: 500 mm
5
Coaxial Light/Simulated Coaxial Episcopic Light
MCEL
MSCL
Series
Shadowless Light
Series
Shadowless Light
Coaxial
3Z4S-LT MCEL-C
External diameter of the point
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Model Number Legend
Shadowless
3Z4S-LT MSRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Shadowless Low Angle Ring
Simulated Coaxial
3Z4S-LT MSLL-C
3Z4S-LT MSCL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Box height Revision code
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Shadowless Low Angle Square
3Z4S-LT MSQL-C
External side dimension (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
List of Models
Lineup of Coaxial Light
Dimension
Liminescent Color
Max. rated current IFM (A)
MCEL-CR8
A
Red
0.04
MCEL-CB8
A
Blue
0.03
MCEL-CW8
A
White
0.03
Weight (g)
Power supply
Connection to strobe controller
080
Line up of Shadowless
080
35
Model
080
MSRL-CR20
Lineup of Simulated Coaxial Episcopic Light
Dimension
Liminescent Color
A
Red
Max. rated current IFM (A)
0.32
MSRL-CW20
A
White
0.50
MSRL-CR33
B
Red
0.45
080
MSRL-CW33
B
White
0.69
080
MSRL-CR44
C
Red
0.57
0.20
080
MSRL-CB44
C
Blue
0.80
Red
0.16
080
MSRL-CW44
C
White
0.80
C
Blue
0.31
MSCL-CW39
C
White
0.31
080
MSCL-CR56-B
D
Red
0.33
080
Model
Dimension
Liminescent Color
Max. rated current IFM (A)
MSCL-CR24
B
Red
0.09
MSCL-CB24
B
Blue
0.20
MSCL-CW24
B
White
MSCL-CR39
C
MSCL-CB39
MSCL-CB56-B
D
Blue
0.66
MSCL-CW56-B
D
White
0.66
MSCL-CR74-B
E
Red
0.62
MSCL-CB74-B
E
Blue
1.11
MSCL-CW74-B
E
White
1.11
MSCL-CR105-B*
F
Red
2.14
MSCL-CB105-B*
F
Blue
2.07
MSCL-CW105-B*
F
White
2.07
Weight (g)
Power supply
110
160
320
Connection to strobe controller
080
Model
080
Dimension
Liminescent Color
MSLL-CR109
D
Red
0.62
MSLL-CW109
D
White
1.10
Model
15
Power supply
80
080
230
Max. rated current IFM (A)
MSQL-CW48
F
White
0.20
120
080
Dimensions
Three, M2
mounting holes
with a depth
of 4 mm
70
20.5
B (MSRL-C 33)
74 dia.
50 dia.
20 dia.
17
30 X 30
26 X 26
(Lighting surface)
Four, M3 mounting holes
with a depth of 4 mm
123 dia.
70 dia.
44 dia.
39
40
20 12
Four, M3 mounting
holes with a depth
of 8 mm
Glass plate
28 dia.
18
18 X 18
10 X 10
110
42
F(MSCL-C 105)
145
56
101 dia. (Lighting surface)
10
Glass plate
105
20
106
70
42
77 X 77
70
15
(Lighting surface)
E (MSQL-C 32)
Four, M3 mounting holes
with a depth of 4 mm
32 X 32
136 dia.
120 dia.
109 dia.
15 X 15
10 X 10
30
15
(Lighting surface)
Reflection
panel
Four, M3 mounting holes with a depth of 3 mm
Note: The reflection panel is detatchable.
126 dia. (Lighting surface)
Four, M3 mounting holes with a depth of 3 mm
Mounting hole locations:
A to D: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
Standard cable length: 500 mm
Glass plate
42 12
50 X 50
110
82
60
14
Four, M3 mounting
holes penetration
75
45
Glass plate
Four, M4 mounting holes
with a depth of 4 mm
D (MSLL-C 109)
30
18
17
E(MSCL-C 74)
74
60
40
56
57
20 18
48 X 48
80 dia. (Lighting surface)
38
Three, M2 mounting holes
with a depth of 4 mm
Four, M4 mounting holes
with a depth of 4 mm
30
28 dia.
40
F (MSQL-C 48)
104 dia.
70 dia.
33 dia.
Four, M3 mounting holes
with a depth of 4 mm
46.1 dia.
C (MSRL-C 44)
Four, M3 mounting holes
with a depth of 4 mm
Cooling fan
Four, M3 mounting holes
with a depth of 4 mm
Connection to strobe controller
230
7
24
93
230
Weight (g)
18 X 18
30
320
0.14
C(MSCL-C 39)
12
Three, M2 mounting holes
with a depth of 4 mm
D (MSCL-C 56)
Connection to strobe controller
080
White
30
6 dia.
(Lighting surface)
Power supply
Refer to page 22.
24
30
8 dia.
Weight (g)
Liminescent Color
40
14 dia.
080
080
Max. rated current IFM (A)
18
17
080
270
E
Four, M3 mounting holes
with a depth of 4 mm
56
17
080
Dimension
A (MSRL-C 20)
B(MSCL-C 24)
080
210
MSQL-CW32
Dimensions
A (MCEL-C 8)
080
230
230
230
*Always run the cooling fan to prevent heat build-up.
*A Power Supply Extension Cable (M-RCB00□L) is require for the built-in fan. This is in addition to the normal Extension Cable.
Connection to strobe controller
080
Line up of Shadowless Low Angle Square
080
920
Power supply
140
Line up of Shadowless Low Angle Ring
080
520
Weight (g)
36
Model
20
Coaxial Light/Simulated Coaxial Episcopic Light
Model Number Legend
MSRL Series
MSLL Series
MSQL Series
Standard cable length: 500 mm
6
7
Coaxial Light/Simulated Coaxial Episcopic Light
MCEL
MSCL
Series
Shadowless Light
Series
Shadowless Light
Coaxial
3Z4S-LT MCEL-C
External diameter of the point
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Model Number Legend
Shadowless
3Z4S-LT MSRL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Shadowless Low Angle Ring
Simulated Coaxial
3Z4S-LT MSLL-C
3Z4S-LT MSCL-C
Internal diameter of the ring (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Box height Revision code
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Shadowless Low Angle Square
3Z4S-LT MSQL-C
External side dimension (mm)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
List of Models
Lineup of Coaxial Light
Dimension
Liminescent Color
Max. rated current IFM (A)
MCEL-CR8
A
Red
0.04
MCEL-CB8
A
Blue
0.03
MCEL-CW8
A
White
0.03
Weight (g)
Power supply
Connection to strobe controller
080
Line up of Shadowless
080
35
Model
080
MSRL-CR20
Lineup of Simulated Coaxial Episcopic Light
Dimension
Liminescent Color
A
Red
Max. rated current IFM (A)
0.32
MSRL-CW20
A
White
0.50
MSRL-CR33
B
Red
0.45
080
MSRL-CW33
B
White
0.69
080
MSRL-CR44
C
Red
0.57
0.20
080
MSRL-CB44
C
Blue
0.80
Red
0.16
080
MSRL-CW44
C
White
0.80
C
Blue
0.31
MSCL-CW39
C
White
0.31
080
MSCL-CR56-B
D
Red
0.33
080
Model
Dimension
Liminescent Color
Max. rated current IFM (A)
MSCL-CR24
B
Red
0.09
MSCL-CB24
B
Blue
0.20
MSCL-CW24
B
White
MSCL-CR39
C
MSCL-CB39
MSCL-CB56-B
D
Blue
0.66
MSCL-CW56-B
D
White
0.66
MSCL-CR74-B
E
Red
0.62
MSCL-CB74-B
E
Blue
1.11
MSCL-CW74-B
E
White
1.11
MSCL-CR105-B*
F
Red
2.14
MSCL-CB105-B*
F
Blue
2.07
MSCL-CW105-B*
F
White
2.07
Weight (g)
Power supply
110
160
320
Connection to strobe controller
080
Model
080
Dimension
Liminescent Color
MSLL-CR109
D
Red
0.62
MSLL-CW109
D
White
1.10
Model
15
Max. rated current IFM (A)
Power supply
080
230
MSQL-CW48
F
White
0.20
120
080
230
Dimensions
Three, M2
mounting holes
with a depth
of 4 mm
70
20.5
B (MSRL-C 33)
74 dia.
50 dia.
20 dia.
F (MSQL-C 48)
104 dia.
70 dia.
33 dia.
Four, M3 mounting holes
with a depth of 4 mm
17
48 X 48
30 X 30
46.1 dia.
80 dia. (Lighting surface)
26 X 26
(Lighting surface)
C (MSRL-C 44)
Four, M3 mounting holes
with a depth of 4 mm
Four, M3 mounting holes
with a depth of 4 mm
10 X 10
110
42
F(MSCL-C 105)
145
56
101 dia. (Lighting surface)
10
Glass plate
105
20
106
70
42
77 X 77
70
15
(Lighting surface)
E (MSQL-C 32)
Four, M3 mounting holes
with a depth of 4 mm
32 X 32
136 dia.
120 dia.
109 dia.
15 X 15
10 X 10
30
15
(Lighting surface)
Reflection
panel
Four, M3 mounting holes with a depth of 3 mm
Note: The reflection panel is detatchable.
126 dia. (Lighting surface)
Four, M3 mounting holes with a depth of 3 mm
Mounting hole locations:
A to D: Equally spaced starting at a 45° offset from where the cable is connected to the unit. (Hole diameters, depths, and quantities are shown in the drawings.)
Standard cable length: 500 mm
Glass plate
42 12
50 X 50
110
82
60
14
Four, M3 mounting
holes penetration
75
45
Glass plate
Four, M4 mounting holes
with a depth of 4 mm
30
18
17
E(MSCL-C 74)
D (MSLL-C 109)
40
123 dia.
70 dia.
44 dia.
39
40
20 12
Four, M3 mounting
holes with a depth
of 8 mm
Glass plate
28 dia.
18
18 X 18
74
60
40
56
57
20 18
Connection to strobe controller
38
Three, M2 mounting holes
with a depth of 4 mm
Four, M4 mounting holes
with a depth of 4 mm
30
28 dia.
40
230
80
Cooling fan
Four, M3 mounting holes
with a depth of 4 mm
Connection to strobe controller
080
Weight (g)
7
24
93
Power supply
320
0.14
18 X 18
30
Weight (g)
White
C(MSCL-C 39)
12
Three, M2 mounting holes
with a depth of 4 mm
D (MSCL-C 56)
080
Liminescent Color
30
6 dia.
(Lighting surface)
080
Refer to page 24.
24
30
8 dia.
080
270
Max. rated current IFM (A)
18
14 dia.
56
17
080
E
Four, M3 mounting holes
with a depth of 4 mm
17
080
Dimension
A (MSRL-C 20)
B(MSCL-C 24)
080
210
MSQL-CW32
Dimensions
A (MCEL-C 8)
140
230
230
230
*Always run the cooling fan to prevent heat build-up.
*A Power Supply Extension Cable (M-RCB00□L) is require for the built-in fan. This is in addition to the normal Extension Cable.
Connection to strobe controller
080
Line up of Shadowless Low Angle Square
080
920
Power supply
Line up of Shadowless Low Angle Ring
080
520
Weight (g)
36
Model
20
Coaxial Light/Simulated Coaxial Episcopic Light
Model Number Legend
MSRL Series
MSLL Series
MSQL Series
Standard cable length: 500 mm
6
7
Bar Light/Line Light
MBRL
Dome Light
Series
Dome Light
Bar Light/Line Light
Model Number Legend
MBRL Series
3Z4S-LT MBRL-C
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
MDML
Series
Model Number Legend
3Z4S-LT MDML-C
External size
Luminescent color (Red=R, White=W)
Dimensions
A (MDML-C 50)
45°
Four, M3 mounting
holes with a depth
of 4 mm
45°
PCD 30
5.5
3.1 dia.
40
List of Models
50 dia.
11 dia.
47 dia.
Lineup of Bar Light
(Lighting part)
Model
Dimension
Liminescent Color
Max. rated current IFM (A)
MBRL-CR5015
A
Red
0.13
MBRL-CB5015
A
Blue
0.26
MBRL-CW5015
A
White
0.26
080
MBRL-CR7530
B
Red
0.36
080
MBRL-CB7530
B
Blue
0.52
MBRL-CW7530
B
White
0.52
MBRL-CR13015
C
Red
0.32
MBRL-CB13015
C
Blue
0.53
MBRL-CW13015
C
White
0.53
Weight (g)
Power supply
Connection to strobe controller
Standard cable length: 500 mm
080
080
50
List of Models
080
120
Model
080
080
Dimension
Liminescent Color
MDML-CR50
A
Red
Max. rated current IFM (A)
0.24
MDML-CW50
A
White
0.37
Weight (g)
Power supply
Connection to strobe controller
080
130
080
080
85
080
Dimensions
85
80
75(Lighting surface)
17
32
50(Lighting surface)
30
Two, M3 mounting
holes with a depth of 4 mm
MCEP
Series
Model Number Legend
3Z4S-LT MCEP-C
18
20
Two, M3 mounting holes
with a depth of 3 mm
High-powered Spot LED Light
B(MBRL-C 7530)
60
55
30(Lighting surface)
(Lighting surface)
15
A(MBRL-C 5015)
8
Luminescent color
(Red=R, Green=G, Blue=B, White=W)
50
Dimensions
140
135
130(Lighting surface)
Removing the Point Rod
6 dia.
(Lighting part)
17
A (MCEP-C 8)
20
6 dia. (Lighting part)
Two, M2 pan
head screws
27 dia.
Pin number
Signal
1P
NC
Power supply(+)
2P
Power supply( - )
3P
14 dia.
8
12
8 dia.
Housing
List of Models
5
LED
30
Separator for the
MCEP-AD Series (27.1)
27.9
Cable
3.1 dia.
Standard cable length: 500 mm
50
Mounting hole locations:
A to C: Arranged around the center of the mounting surface.
2
25 dia.
80
18 dia.
(Lighting part)
Two, M3 mounting holes
with a depth of 3 mm
1 Two, M2 pan head screws
27 dia.
15
(Lighting surface)
C (MBRL-C 13015)
Connector
1P
500
Undo the two screws then remove .
It can be connected to the MCEP-AD Series
Model
Dimension
Liminescent
Color
MCEP-CR8
A
Red
620.5
MCEP-CB8
A
Blue
470
MCEP-CW8
A
White
Dominant wavelength*
Color temperature
645nm
480nm
All
5000
Max. rated current IFM (A) Weight (g)
–
0.35
–
0.35
6000K
Connection to
strobe controller
50
0.35
*The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant
wavelengths of these LEDs. Colors may appear to be different even for the same model number.
Standard cable length: 500 mm
8
9
Bar Light/Line Light
MBRL
Dome Light
Series
Dome Light
Bar Light/Line Light
Model Number Legend
MBRL Series
3Z4S-LT MBRL-C
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
MDML
Series
Model Number Legend
3Z4S-LT MDML-C
External size
Luminescent color (Red=R, White=W)
Dimensions
A (MDML-C 50)
45°
Four, M3 mounting
holes with a depth
of 4 mm
45°
PCD 30
5.5
3.1 dia.
40
List of Models
50 dia.
11 dia.
47 dia.
Lineup of Bar Light
(Lighting part)
Model
Dimension
Liminescent Color
Max. rated current IFM (A)
MBRL-CR5015
A
Red
0.13
MBRL-CB5015
A
Blue
0.26
MBRL-CW5015
A
White
0.26
080
MBRL-CR7530
B
Red
0.36
080
MBRL-CB7530
B
Blue
0.52
MBRL-CW7530
B
White
0.52
MBRL-CR13015
C
Red
0.32
MBRL-CB13015
C
Blue
0.53
MBRL-CW13015
C
White
0.53
Weight (g)
Power supply
Connection to strobe controller
Standard cable length: 500 mm
080
080
50
List of Models
080
120
Model
080
080
Dimension
Liminescent Color
MDML-CR50
A
Red
Max. rated current IFM (A)
0.24
MDML-CW50
A
White
0.37
Weight (g)
Power supply
Connection to strobe controller
080
130
080
080
85
080
Dimensions
85
80
75(Lighting surface)
17
32
50(Lighting surface)
30
Two, M3 mounting
holes with a depth of 4 mm
MCEP
Series
Model Number Legend
3Z4S-LT MCEP-C
18
20
Two, M3 mounting holes
with a depth of 3 mm
High-powered Spot LED Light
B(MBRL-C 7530)
60
55
30(Lighting surface)
(Lighting surface)
15
A(MBRL-C 5015)
8
Luminescent color
(Red=R, Green=G, Blue=B, White=W)
50
Dimensions
140
135
130(Lighting surface)
Removing the Point Rod
6 dia.
(Lighting part)
17
A (MCEP-C 8)
20
6 dia. (Lighting part)
Two, M2 pan
head screws
27 dia.
Pin number
Signal
1P
NC
Power supply(+)
2P
Power supply( - )
3P
14 dia.
8
12
8 dia.
Housing
List of Models
5
LED
30
Separator for the
MCEP-AD Series (27.1)
27.9
Cable
3.1 dia.
Standard cable length: 500 mm
50
Mounting hole locations:
A to C: Arranged around the center of the mounting surface.
2
25 dia.
80
18 dia.
(Lighting part)
Two, M3 mounting holes
with a depth of 3 mm
1 Two, M2 pan head screws
27 dia.
15
(Lighting surface)
C (MBRL-C 13015)
Connector
1P
500
Undo the two screws then remove .
It can be connected to the MCEP-AD Series
Model
Dimension
Liminescent
Color
MCEP-CR8
A
Red
620.5
MCEP-CB8
A
Blue
470
MCEP-CW8
A
White
Dominant wavelength*
Color temperature
645nm
480nm
All
5000
Max. rated current IFM (A) Weight (g)
–
0.35
–
0.35
6000K
Connection to
strobe controller
50
0.35
*The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant
wavelengths of these LEDs. Colors may appear to be different even for the same model number.
Standard cable length: 500 mm
8
9
MDRL Series
MSRL Series
MBRL Series
MDBL Series
IR Light
3Z4S-LT M
L
-
C IR
DR=Direct ring
SR=Shadowless ring
BR=Bar
DB=Direct backlight
Direct Backlight
Direct Backlight
IR Light
Model Number Legend
See the explanation
of each series model
MDBL Series
MDBC Series
Model Number Legend
Shell type
3Z4S-LT MDBL-C
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Luminescent color
(IR: Infrared)
Chip mounting type
3Z4S-LT MDBC-C
Chip type
List of Models
List of Models
Dimension
Liminescent Color
A
Infrared
Max. rated current IFM (A)
0.40
Weight (g)
Power supply
120
080
Connection to strobe controller
Lineup of Shell type
Model
MDBL-CR25
*The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant wavelengths of these LEDs. Colors may appear to be different even for the same
model number.
Dimensions
A (MBRL-CIR7530)
85
80
Max. rated current IFM (A)
Red
0.14
Weight (g)
Power supply
Connection to strobe controller
080
MDBL-CB25
A
Blue
0.27
MDBL-CW25
A
White
0.27
MDBL-CR70
B
Red
0.48
MDBL-CB70
B
Blue
0.96
MDBL-CW70
B
White
0.96
MDBL-CR100
C
Red
1.43
MDBL-CB100
C
Blue
1.55
MDBL-CW100
C
White
1.55
MDBL-CR180100
D
Red
2.30
MDBL-CB180100
D
Blue
2.30
MDBL-CW180100
D
White
2.30
Dimension
Liminescent Color
MDBC-CR100
Model
E
Red
Max. rated current IFM (A)
0.81
MDBC-CW100
E
White
0.95
MDBC-CR150
F
Red
0.99
MDBC-CW150
F
White
2.14
60
080
080
080
190
230
230
230
290
230
230
230
520
230
230
Weight (g)
Power supply
Connection to strobe controller
230
170
230
230
310
230
50
Standard cable length: 500 mm
D (MDBL-C 180100)
70 (Lighting surface)
25 (Lighting surface)
152
150 (Lighting surface)
Diffusion board
10
100
160
5
150 (Lighting surface)
30
24
4-3.5 dia.
130
120
C (MDBL-C 100)
10
80
Diffusion board
110
4-3.5 dia.
102
F(MDBC-C 150)
100 (Lighting surface)
100 (Lighting surface)
Diffusion board
E (MDBC-C 100)
130
120
100 (Lighting surface)
100
90
72
27
B (MDBL-C 70)
49
42
17
25 (Lighting surface)
A (MDBL-C 25)
130
Mounting hole locations: C: Arranged around the center of the mounting surface.
Dimensions
182
180 (Lighting surface)
Four, M3 mounting holes
with a depth of 4 mm
Liminescent Color
A
Lineup of Chip mounting type
18
32
30 (Lighting surface)
75 (Lighting surface)
Dimension
60
MBRL-CIR7530
70 (Lighting surface)
Model
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
5
2-4.5 dia.
100 (Lighting surface)
30
102
4-3.5 dia.
R 10
G, B, W
2-4.5 dia.
15
100 (Lighting surface)
50
Diffusion board
Diffusion board
15
4-3.5 dia.
30
Diffusion board
Standard cable length: 500 mm
10
11
MDRL Series
MSRL Series
MBRL Series
MDBL Series
IR Light
3Z4S-LT M
L
-
C IR
DR=Direct ring
SR=Shadowless ring
BR=Bar
DB=Direct backlight
Direct Backlight
Direct Backlight
IR Light
Model Number Legend
See the explanation
of each series model
MDBL Series
MDBC Series
Model Number Legend
Shell type
3Z4S-LT MDBL-C
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
Luminescent color
(IR: Infrared)
Chip mounting type
3Z4S-LT MDBC-C
Chip type
List of Models
List of Models
Dimension
Liminescent Color
A
Infrared
Max. rated current IFM (A)
0.40
Weight (g)
Power supply
120
080
Connection to strobe controller
Lineup of Shell type
Model
MDBL-CR25
*The dominant wavelength of visible color according to CIE color coordinates. There are differences in the illuminated color for the dominant wavelengths of these LEDs. Colors may appear to be different even for the same
model number.
Dimensions
A (MBRL-CIR7530)
85
80
Max. rated current IFM (A)
Red
0.14
Weight (g)
Power supply
Connection to strobe controller
080
MDBL-CB25
A
Blue
0.27
MDBL-CW25
A
White
0.27
MDBL-CR70
B
Red
0.48
MDBL-CB70
B
Blue
0.96
MDBL-CW70
B
White
0.96
MDBL-CR100
C
Red
1.43
MDBL-CB100
C
Blue
1.55
MDBL-CW100
C
White
1.55
MDBL-CR180100
D
Red
2.30
MDBL-CB180100
D
Blue
2.30
MDBL-CW180100
D
White
2.30
Dimension
Liminescent Color
MDBC-CR100
Model
E
Red
Max. rated current IFM (A)
0.81
MDBC-CW100
E
White
0.95
MDBC-CR150
F
Red
0.99
MDBC-CW150
F
White
2.14
60
080
080
080
190
230
230
230
290
230
230
230
520
230
230
Weight (g)
Power supply
Connection to strobe controller
230
170
230
230
310
230
50
Standard cable length: 500 mm
D (MDBL-C 180100)
70 (Lighting surface)
25 (Lighting surface)
152
150 (Lighting surface)
Diffusion board
10
100
160
5
150 (Lighting surface)
30
24
4-3.5 dia.
130
120
C (MDBL-C 100)
10
80
Diffusion board
110
4-3.5 dia.
102
F(MDBC-C 150)
100 (Lighting surface)
100 (Lighting surface)
Diffusion board
E (MDBC-C 100)
130
120
100 (Lighting surface)
100
90
72
27
B (MDBL-C 70)
49
42
17
25 (Lighting surface)
A (MDBL-C 25)
130
Mounting hole locations: C: Arranged around the center of the mounting surface.
Dimensions
182
180 (Lighting surface)
Four, M3 mounting holes
with a depth of 4 mm
Liminescent Color
A
Lineup of Chip mounting type
18
32
30 (Lighting surface)
75 (Lighting surface)
Dimension
60
MBRL-CIR7530
70 (Lighting surface)
Model
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
5
2-4.5 dia.
100 (Lighting surface)
30
102
4-3.5 dia.
R 10
G, B, W
2-4.5 dia.
15
100 (Lighting surface)
50
Diffusion board
Diffusion board
15
4-3.5 dia.
30
Diffusion board
Standard cable length: 500 mm
10
11
MEBL
Edge-type Backlight
Series
Square Oblique Light
Square Oblique Light
3Z4S-LT MEBL-C
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
3Z4S-LT MDQL-C
External size
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
Liminescent Color
Max. rated current IFM (A)
Red
0.03
Weight (g)
Power supply
Connection to strobe controller
Model
Dimension
080
MDQL-CR58
Liminescent Color
Max. rated current IFM (A)
A
Red
0.09
MEBL-CB25
A
Blue
0.04
080
MDQL-CW58
A
White
0.17
MEBL-CW25
A
White
0.04
080
MDQL-CR108
B
Red
0.42
MEBL-CR50
B
Red
0.17
080
MDQL-CW108
B
White
0.84
MEBL-CB50
B
Blue
0.29
MEBL-CW50
B
White
0.29
MEBL-CR7050
C
Red
0.15
MEBL-CB7050
C
Blue
0.25
MEBL-CW7050
C
White
0.25
080
MEBL-CR10080
D
Red
0.32
080
MEBL-CB10080
D
Blue
0.57
MEBL-CW10080
D
White
0.57
080
MEBL-CR145
E
Red
0.45
080
58
MEBL-CB145
E
Blue
0.8
080
30
MEBL-CW145
E
White
0.8
080
25
45
110
B (MDQL-C 108)
30
25
30
58
12
90
80
3
LED
71
50 (Lighting surface)
30
185
145 (Lighting surface)
120
Housing
Four, M2.6
15 (Lighting surface)
LED
Base
4-4M
Housing
Standard cable length: 500 mm
2-C2
4-3.4 dia.
6 dia. through counter
bore depth 3.3
100 (Lighting surface)
195
185
145 (Lighting surface)
120
110
80 (Lighting surface)
11
8
2-3.5 dia.
60
14
25 (Lighting surface)
39
50 (Lighting surface)
60
E(MEBL-C 145)
132
100
8
94
70 (Lighting surface)
Cable
Eight, M2 depth
°
45
7.5
108
70
60
54
30
3
C(MEBL-C 7050)
50 (Lighting surface)
D(MEBL-C 10080)
230
108
70
60
54
460
A (MDQL-C 58)
90
25 (Lighting surface)
080
080
4 8
4-3.4 dia.
6 dia. through counter
bore depth 3.3
080
Dimensions
080
230
2-3.5 dia.
15
Connection to strobe controller
080
080
140
74
60
8
210
Power supply
080
B(MEBL-C 50)
27
55
080
Dimensions
A (MEBL-C 25)
Weight (g)
3.1 dia.
A
60
Dimension
42 (Lighting surface)
Model
MEBL-CR25
6.5
Series
Model Number Legend
3.1 dia.
Edge-type Backlight
Model Number Legend
MDQL
4-3.4 dia.
6 dia. through counter
bore depth 3.3
4-C2
Standard cable length: 500 mm
12
13
MEBL
Edge-type Backlight
Series
Square Oblique Light
Square Oblique Light
3Z4S-LT MEBL-C
Size (length and width)
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
3Z4S-LT MDQL-C
External size
Luminescent color (Red=R, Green=G, Blue=B, White=W)
List of Models
Liminescent Color
Max. rated current IFM (A)
Red
0.03
Weight (g)
Power supply
Connection to strobe controller
Model
Dimension
080
MDQL-CR58
Liminescent Color
Max. rated current IFM (A)
A
Red
0.09
MEBL-CB25
A
Blue
0.04
080
MDQL-CW58
A
White
0.17
MEBL-CW25
A
White
0.04
080
MDQL-CR108
B
Red
0.42
MEBL-CR50
B
Red
0.17
080
MDQL-CW108
B
White
0.84
MEBL-CB50
B
Blue
0.29
MEBL-CW50
B
White
0.29
MEBL-CR7050
C
Red
0.15
MEBL-CB7050
C
Blue
0.25
MEBL-CW7050
C
White
0.25
080
MEBL-CR10080
D
Red
0.32
080
MEBL-CB10080
D
Blue
0.57
MEBL-CW10080
D
White
0.57
080
MEBL-CR145
E
Red
0.45
080
58
MEBL-CB145
E
Blue
0.8
080
30
MEBL-CW145
E
White
0.8
080
25
45
110
B (MDQL-C 108)
30
25
30
58
12
90
80
3
LED
71
50 (Lighting surface)
30
185
145 (Lighting surface)
120
Housing
Four, M2.6
15 (Lighting surface)
LED
Base
4-4M
Housing
Standard cable length: 500 mm
2-C2
4-3.4 dia.
6 dia. through counter
bore depth 3.3
100 (Lighting surface)
195
185
145 (Lighting surface)
120
110
80 (Lighting surface)
11
8
2-3.5 dia.
60
14
25 (Lighting surface)
39
50 (Lighting surface)
60
E(MEBL-C 145)
132
100
8
94
70 (Lighting surface)
Cable
Eight, M2 depth
°
45
7.5
108
70
60
54
30
3
C(MEBL-C 7050)
50 (Lighting surface)
D(MEBL-C 10080)
230
108
70
60
54
460
A (MDQL-C 58)
90
25 (Lighting surface)
080
080
4 8
4-3.4 dia.
6 dia. through counter
bore depth 3.3
080
Dimensions
080
230
2-3.5 dia.
15
Connection to strobe controller
080
080
140
74
60
8
210
Power supply
080
B(MEBL-C 50)
27
55
080
Dimensions
A (MEBL-C 25)
Weight (g)
3.1 dia.
A
60
Dimension
42 (Lighting surface)
Model
MEBL-CR25
6.5
Series
Model Number Legend
3.1 dia.
Edge-type Backlight
Model Number Legend
MDQL
4-3.4 dia.
6 dia. through counter
bore depth 3.3
4-C2
Standard cable length: 500 mm
12
13
Spot Led Light
MSPP
Lens
Series
(CE Marking)
Series
Lens
Spot Led Light
Model Number Legend
SV
3Z4S-LT MSPP-C
Effective size (Lighting part)
Luminescent color (Red=R, White=W)
List of Models
Wide projection
Model
Dimension Liminescent
Color
Max. rated current IFM (A)
Weight (g)
Power supply
MSPP-CR42
A
Red
0.7
460g
MLEP-A070 series
Connection to strobe controller
MSPP-CW42
A
White
0.7
460g
MLEP-A070 series
Max. rated current IFM (A)
Weight (g)
Power supply
List of Models
Nallow projection
Model
Dimension Liminescent
Color
Connection to strobe controller
MSPP-CR74
B
Red
0.7
600g
MLEP-A070 series
MSPP-CW74
B
White
0.7
600g
MLEP-A070 series
Model
*Always connect a Conversion Cable (3Z4S-LT M-RCB301XS) when connecting the power supply.
Dimensions
B(MSPP-C 74)
58 dia.
42 dia.
(Effective lighting part)
72
87
150
90 dia.
74 dia.
(Effective lighting part)
102
117
150
CN1
1 3
2 4
CN1
4
1
(6 dia.)
2
Screw for adjusting light focus
Screw for adjusting light focus
40 5
12.5
5
12.5
40
3
(6 dia.)
56
A (MSPP-C 42)
Dimension Focal distance f (mm)
3Z4S-LE SV-0614V
Four, M5 mounting holes with a depth of 8 mm
(including the other side)
Four, M5 mounting holes with a depth of 8 mm
(including the other side)
A
Focus (F No.) Field of view (V X H) Closest distance (m)
6
F1.4
Close
42.3° × 54.6°
F1.3
Close
44.6° × 57.3°
3Z4S-LE SV-0813V
B
8
3Z4S-LE SV-1214V
C
12
3Z4S-LE SV-1614V
D
16
3Z4S-LE SV-2514V
E
3Z4S-LE SV-3518V
200- ∞
21.9°× 28.9°
300- ∞
22.8° × 30.1°
400- ∞
25
14.9° × 19.8°
500- ∞
F
35
10.8° × 14.4°
300- ∞
3Z4S-LE SV-5018V
G
50
3Z4S-LE SV-7527V
H
3Z4S-LE SV-10035V
I
3Z4S-LE SV-0614H
3Z4S-LE SV-0814H
F1.4
Close
Filter screw
Weight (g)
Total length A (mm)
Maximum compatible CCD
M27.0 P0.5
49
1/2 inch
M25.5 P0.5
55
30.0
34.0
44
29.5
1/2 inch
34
24.0
2/3 inch
36
24.5
1 inch
47
33.5
67
37.0
M27.0 P0.5
F1.8
Close
75
F2.7
Close
4.9° × 6.6°
76
42.0
100
F3.5
Close
4.0° × 5.3°
79
43.9
J
6
56.8° × 71.5°
M40.5 P0.5
145
57.5
K
8
44.9° × 57.6°
M35.5 P0.5
125
52.5
3Z4S-LE SV-1214H
L
12
30.2° × 39.6°
3Z4S-LE SV-1614H
M
16
3Z4S-LE SV-2514H
N
25
15.0° × 20.0°
150
3Z4S-LE SV-3514H
O
35
10.8° × 14.3°
200
3Z4S-LE SV-5014H
P
50
7.5° × 10.0°
300
3Z4S-LE SV-7525H
Q
75
F2.5
Close
5.0° × 6.7°
3Z4S-LE SV-10028H
R
100
F2.8
Close
3.9° × 5.1°
F1.4
7.9° × 10.5°
16
1000- ∞
M30.5 P0.5
100
23.1° × 30.6°
2/3 inch
2/3 inch
C-mount
1/2 inch
51.0
85
M27.0 P0.5
Camera Mount
2/3 inch
47.5
65
36.0
M35.5 P0.5
150
45.5
M40.5 P0.5
170
57.5
1200
M34.0 P0.5
63
49.5
2/3 inch
2000
M37.5 P0.5
85
66.5
2/3 inch
Dimensions
80
Q (SV-7525H)
15
60
Diaphragm Lock Screw
14
1-32 UNF (C -mount)
29.5 dia.
29 dia.
29.5 dia.
31 dia.
32 dia.
M30.5 P=0.5
32 dia.
32 dia.
44 dia.
28.5 dia.
R (SV-10028H)
17.526
57.5
4
0.4
1-32 UNF
(C -mount)
1-32 UNF (C -mount)
36 dia.
Four, M3 mounting
holes with a
depth of 6 mm
39 dia.
40
M37.5 P=0.5
38
28
20
66.5
Focus Lock Screw
17.526
4
P (SV-5014H)
1-32 UNF
(C -mount)
Focus Lock Screw
49.5
17.526
4
M34 P=0.5
20
1-32 UNF (C -mount)
17.526
45.5
4
3.5
1-32 UNF (C -mount)
Four, M3 mounting holes
with a depth of 4 mm
O(SV-3514H)
4
2.5
30 dia.
Screw with a hexagonal
holes M3
17.526
36
46
34
102
30 dia.
30
5
N (SV-2514H)
28.5 dia.
M27 P=0.5
4
A (MCBP-C 3430)
1-32 UNF (C -mount)
1-32 UNF (C -mount)
17.526
47.5
M27 P=0.5
M (SV-1614H)
M30.5 P=0.5
29 dia.
1-32 UNF (C -mount)
Dimensions
M27 P=0.5
080
30 dia.
080
28.5 dia.
260
3.6
44 dia.
0.07
17.526
4
42 dia.
M40.5 P=0.5
0.07
White
51
4.3
38 dia.
Blue
A
Connection to strobe controller
38 dia.
A
MCBP-CW3430
Power supply
42 dia.
MCBP-CB3430
Weight (g)
31 dia.
Max. rated current IFM (A)
32 dia.
Liminescent
Color
4
2.6
1-32 UNF (C -mount)
L (SV-1214H)
17.526
52.5
4
2.1
M30.5 P=0.5
Dimension
K (SV-0814H)
17.526
57.5
4
4
Model
29 dia.
29.5 dia.
28 dia.
M25.5 P=0.5
29 dia.
17.526
43.9
M40.5 P=0.5
List of Models
J (SV-0614H)
4
1-32 UNF (C -mount)
1-32 UNF (C -mount)
1-32 UNF (C -mount)
I (SV-10035V)
17.526
42
4
M27 P=0.5
29.5 dia.
29 dia.
M27 P=0.5
Parallel Light
Size (length and width)
Luminescent color (Red=R, White=W)
1-32 UNF (C -mount)
H (SV-7527V)
17.526
37
4
1.7
1.5
1-32 UNF (C -mount)
G(SV-5018V)
17.526
33.5
4
3Z4S-LT MCBP-C
4
1-32 UNF (C -mount)
F (SV-3518V)
17.526
17.526
24
0.3
39 dia.
24.5
D (SV-1614V)
17.526
4
37 dia.
M35.5 P=0.5
E (SV-2514V)
29.5
3.4
1-32 UNF (C -mount)
Model Number Legend
C (SV-1214V)
17.526
4
M27 P=0.5
34
2.8
M27 P=0.5
B (SV-0813V)
17.526
4
37 dia.
30
M35.5 P=0.5
A (SV-0614V)
29.5 dia.
Series
29 dia.
MCBP
M27 P=0.5
Parallel Light
Diaphragm Lock Screw
1-32 UNF
(C -mount)
15
Spot Led Light
MSPP
Series
MEMO
(CE Marking)
Lens
Spot Led Light
Model Number Legend
3Z4S-LT MSPP-C
Effective size (Lighting part)
Luminescent color (Red=R, White=W)
List of Models
Wide projection
Model
Dimension Liminescent
Color
Max. rated current IFM (A)
Weight (g)
Power supply
MSPP-CR42
A
Red
0.7
460g
MLEP-A070 series
Connection to strobe controller
MSPP-CW42
A
White
0.7
460g
MLEP-A070 series
Nallow projection
Model
Dimension Liminescent
Color
Max. rated current IFM (A)
Weight (g)
Power supply
MSPP-CR74
B
Red
0.7
600g
MLEP-A070 series
Connection to strobe controller
MSPP-CW74
B
White
0.7
600g
MLEP-A070 series
*Always connect a Conversion Cable (3Z4S-LT M-RCB301XS) when connecting the power supply.
Dimensions
B(MSPP-C 74)
58 dia.
42 dia.
(Effective lighting part)
72
87
150
90 dia.
74 dia.
(Effective lighting part)
102
117
150
CN1
1 3
2 4
CN1
4
1
(6 dia.)
2
Screw for adjusting light focus
Screw for adjusting light focus
40 5
12.5
5
12.5
40
3
(6 dia.)
56
A (MSPP-C 42)
Four, M5 mounting holes with a depth of 8 mm
(including the other side)
Four, M5 mounting holes with a depth of 8 mm
(including the other side)
Parallel Light
MCBP
Series
Model Number Legend
Parallel Light
3Z4S-LT MCBP-C
Size (length and width)
Luminescent color (Red=R, White=W)
List of Models
Dimension
Liminescent
Color
MCBP-CB3430
A
Blue
0.07
MCBP-CW3430
A
White
0.07
Model
Max. rated current IFM (A)
Weight (g)
260
Power supply
Connection to strobe controller
080
080
Dimensions
A (MCBP-C 3430)
30
102
Screw with a hexagonal
holes M3
46
34
5
Four, M3 mounting holes
with a depth of 4 mm
80
28
20
38
40
14
20
Four, M3 mounting
holes with a
depth of 6 mm
15
60
15
New Power Supplies for MCEP/MSPP Series
NEW MLEP
Model Number Legend
3Z4S-LT MLEP-A
These constant-current power supplies are designed specifically for the MCEP Series of
High-power LED Spot Lights and MSPP Series of LED Spot Lights.
NEW MLEP Analog
MLEP-A035W1
LR-200V
MLEP-A070W1
LR-100V
MLEP-A070W1
LR-200V
MLEP-A035W3
LR-100V
MLEP-A035W3
LR-200V
MLEP-A070W3
LR-100V
MLEP-A070W3
LR-200V
100V
200V
100V
200V
100V
200V
100V
200V
Single-channel out put
max.350 mA
Output
Series
Single-channel out put
max.700 mA
3-channel out put
for each channel max.350 mA
3-channel out put
for each channel max.700 mA
Model
MLEP-A035W1
LRD-100V
MLEP-A035W1
LRD-200V
MLEP-A070W1
LRD-100V
MLEP-A070W1
LRD-200V
MLEP-A035W3
LRD-100V
MLEP-A035W3
LRD-200V
MLEP-A070W3
LRD-100V
MLEP-A070W3
LRD-200V
100V
200V
100V
200V
100V
200V
100V
200V
AC Type
Single-channel out put
max.350 mA
Output
Single-channel out put
max.700 mA
3-channel out put
for each channel max.350 mA
3-channel out put
for each channel max.700 mA
A
B
A
B
Input voltage
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
Input voltage
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
Input current
0.35 / 0.25A
(at AC 100/240V)
0.35/0.25 A
(at AC 100/240V)
Input current
0.35 / 0.25A
(at AC 100/240V)
0.35/0.25 A
(at AC 100/240V)
Surge current
20A or lower (at 100V AC)
40A or lower (at 240V AC)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
Surge current
20A or lower (at 100V AC)
40A or lower (at 240V AC)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
Operating temperature
Dimension
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (0 to 5V)
Supported (0 to 5V)
Lighting on/off function
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Natural air cooling
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 0.9kg
Approximately 1.4kg
Output system
Cooling system
Installation
Weight
Connection Specifications
Operating temperature
5V
A
A
A
NC
Relay
Photo-coupler
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Installation
Natural air cooling
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 0.9kg
Approximately 1.4kg
9
3.9k
8bit digital input 20 (LSB)
COMMON (+)
8bit digital input 21
(Do not use.)
Relay
Photo-coupler
Transistor
8bit digital input 25
A
8bit digital input 26
LSB
1
3.9k
MSB
8
5V
3.9k
8bit digital input 27 (MSB)
15
8
2.5V Ref
5V
47k
A
ON/OFF
10
3.9k
Dimensions
A (MLEP-A035W1LRD/MLEP-A070W1LRD)
75
150
(6)
150
150
150
10
10
130
15
130
15
10
120
10
120
55
55
(6)
150
(6)
75
150
B (MLEP-A035W3LRD/MLEP-A070W3LRD)
75
75
B(MLEP-A035W3LR/MLEP-A070W3LR)
75
A (MLEP-A035W1LR/MLEP-A070W1LR)
(6)
Dimensions
13
A
47k
47k
8bit digital input 24
NC
NC
A
5V
9
8bit digital input 23
NC
11
NC
8
A
8bit digital input 22
NC
10k
COMMON
1
Output ON/OFF signal
0-5V
NC
MLEP-A035W LRD/MLEP-A070W LRD
5V,24V
47k
2
I/O Circuit Diagrams
MLEP-A035W LRD/MLEP-A070W LRD
10
NC
15
Supported ( for each channel, 8bit digital)
Lighting on/off function
Transistor
NC
NC
Constant current control (the current can be changed)
Supported (8bit digital)
NC
NC
2.5 VDC bias power supply output
75
1
NC
External input GND
NC
ON/OFF
Output ON/OFF signal (-)
Constant current control (the current can be changed)
External light control
Weight
MLEP-A035W LR/MLEP-A070W LR
Output ON/OFF signal (+)
NC
Output control system
Connection Specifications
1
External 0-5V Analog dimmer signal input
0 to +45˚C
Continuous DC output
Cooling system
5V,24V
9
0 to +45˚C
Continuous DC output
Output system
I/O Circuit Diagrams
MLEP-A035W LR/MLEP-A070W LR
10
16
Output
channel
Ratings and Specifications
MLEP-A035W
1LR-100V
Dimension
V
AC type
Digital type (D)
Models are available with a digital light adjustment and for either one or three channels.
A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Ratings and Specifications
AC Type
-
NEW MLEP Digtal
Models are available with an analog light adjustment and for either one or three channels.
A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Model
W LR
Maximum output current
Series
Series
130
10
130
17
New Power Supplies for MCEP/MSPP Series
NEW MLEP
Model Number Legend
3Z4S-LT MLEP-A
These constant-current power supplies are designed specifically for the MCEP Series of
High-power LED Spot Lights and MSPP Series of LED Spot Lights.
NEW MLEP Analog
MLEP-A035W1
LR-200V
MLEP-A070W1
LR-100V
MLEP-A070W1
LR-200V
MLEP-A035W3
LR-100V
MLEP-A035W3
LR-200V
MLEP-A070W3
LR-100V
MLEP-A070W3
LR-200V
100V
200V
100V
200V
100V
200V
100V
200V
Single-channel out put
max.350 mA
Output
Series
Single-channel out put
max.700 mA
3-channel out put
for each channel max.350 mA
3-channel out put
for each channel max.700 mA
Model
MLEP-A035W1
LRD-100V
MLEP-A035W1
LRD-200V
MLEP-A070W1
LRD-100V
MLEP-A070W1
LRD-200V
MLEP-A035W3
LRD-100V
MLEP-A035W3
LRD-200V
MLEP-A070W3
LRD-100V
MLEP-A070W3
LRD-200V
100V
200V
100V
200V
100V
200V
100V
200V
AC Type
Single-channel out put
max.350 mA
Output
Single-channel out put
max.700 mA
3-channel out put
for each channel max.350 mA
3-channel out put
for each channel max.700 mA
A
B
A
B
Input voltage
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
Input voltage
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
Input current
0.35 / 0.25A
(at AC 100/240V)
0.35/0.25 A
(at AC 100/240V)
Input current
0.35 / 0.25A
(at AC 100/240V)
0.35/0.25 A
(at AC 100/240V)
Surge current
20A or lower (at 100V AC)
40A or lower (at 240V AC)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
Surge current
20A or lower (at 100V AC)
40A or lower (at 240V AC)
20A or lower (at 100V AC)
40A or lower (at 240V AC)
Operating temperature
Dimension
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (0 to 5V)
Supported (0 to 5V)
Lighting on/off function
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Natural air cooling
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 0.9kg
Approximately 1.4kg
Output system
Cooling system
Installation
Weight
Connection Specifications
Operating temperature
5V
A
A
A
NC
Relay
Photo-coupler
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Installation
Natural air cooling
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 0.9kg
Approximately 1.4kg
9
3.9k
8bit digital input 20 (LSB)
COMMON (+)
8bit digital input 21
(Do not use.)
Relay
Photo-coupler
Transistor
8bit digital input 25
A
8bit digital input 26
LSB
1
3.9k
MSB
8
5V
3.9k
8bit digital input 27 (MSB)
15
8
2.5V Ref
5V
47k
A
ON/OFF
10
3.9k
Dimensions
A (MLEP-A035W1LRD/MLEP-A070W1LRD)
75
150
(6)
150
150
150
10
10
130
15
130
15
10
120
10
120
55
55
(6)
150
(6)
75
150
B (MLEP-A035W3LRD/MLEP-A070W3LRD)
75
75
B(MLEP-A035W3LR/MLEP-A070W3LR)
75
A (MLEP-A035W1LR/MLEP-A070W1LR)
(6)
Dimensions
13
A
47k
47k
8bit digital input 24
NC
NC
A
5V
9
8bit digital input 23
NC
11
NC
8
A
8bit digital input 22
NC
10k
COMMON
1
Output ON/OFF signal
0-5V
NC
MLEP-A035W LRD/MLEP-A070W LRD
5V,24V
47k
2
I/O Circuit Diagrams
MLEP-A035W LRD/MLEP-A070W LRD
10
NC
15
Supported ( for each channel, 8bit digital)
Lighting on/off function
Transistor
NC
NC
Constant current control (the current can be changed)
Supported (8bit digital)
NC
NC
2.5 VDC bias power supply output
75
1
NC
External input GND
NC
ON/OFF
Output ON/OFF signal (-)
Constant current control (the current can be changed)
External light control
Weight
MLEP-A035W LR/MLEP-A070W LR
Output ON/OFF signal (+)
NC
Output control system
Connection Specifications
1
External 0-5V Analog dimmer signal input
0 to +45˚C
Continuous DC output
Cooling system
5V,24V
9
0 to +45˚C
Continuous DC output
Output system
I/O Circuit Diagrams
MLEP-A035W LR/MLEP-A070W LR
10
16
Output
channel
Ratings and Specifications
MLEP-A035W
1LR-100V
Dimension
V
AC type
Digital type (D)
Models are available with a digital light adjustment and for either one or three channels.
A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Ratings and Specifications
AC Type
-
NEW MLEP Digtal
Models are available with an analog light adjustment and for either one or three channels.
A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Model
W LR
Maximum output current
Series
Series
130
10
130
17
New Power Supplies for MG-Wave Series
These new power supplies are designed specifically for Moritex Constant-current LED Lights (except for the MCEP Series).
Even when combining with an LED Light from the broad lineup and possible applications, you can select the ideal
Constant-current Power Supply for the required current consumption. The Power Supplies suppress heat generation and will
make the most of the characteristics of any of the LED Light. External output controls and other features are also provided.
A080/230W
Series
Model Number Legend
3Z4S-LT MLEK-A
W LR
A080/230W
V
AC type
Digital type (D)
Output
channel
Maximum output current
Analog Series (Total current: 0.8 A or 2.3 A)
-
Digtal Series (Total current: 0.8 A or 2.3 A)
Models are available with an analog light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Models are available with a digital light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Ratings and Specifications
Ratings and Specifications
Model
MLEK-A080W1LR-100V
MLEK-A080W1LR-200V
MLEK-A080W2LR-100V
MLEK-A080W2R-200V
100V
200V
100V
200V
AC Type
Two-channel maximum, output of 0.8A for each channel
(for connection to all lights except the MCEP Series)
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
A
B
Input current
0.3 / 0.15A
(at AC 100/240V)
0.3 / 0.15A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
Input voltage
Dimension
0 to +45˚C
Continuous DC output
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (0 to 5V)
Supported (0 to 5V)
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Supported (photocoupler insulation, control error)
Lighting on/off function
Error output
Cooling system
Installation
Model
Approximately 1.3kg
B
Input current
0.3 / 0.15A
(at AC 100/240V)
0.3 / 0.15A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (8bit digital)
Supported ( for each channel, 8bit digital)
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Supported (photocoupler insulation, control error)
Installation
Natural air cooling
Natural air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1kg
Approximately 1.3kg
Weight
MLEK-A230W1LR-200V
MLEK-A230W2LR-100V
MLEK-A230W2LR-200V
100V
200V
100V
200V
Model
MLEK-A230W1LRD-100V
MLEK-A230W1LRD-200V
MLEK-A230W2LRDB-100V
MLEK-A230W2LRDB-200V
100V
200V
100V
200V
AC Type
Single-channel output of 2.3A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 2.3A for each channel
(for connection to all lights except the MCEP Series)
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
A
B
Input current
0.7 / 0.4A
(at AC 100/240V)
0.7 / 0.4A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
Output system
100 - 240V AC 50 / 60Hz
Cooling system
MLEK-A230W1LR-100V
Output
Single-channel output of 2.3A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 2.3A for each channel
(for connection to all lights except the MCEP Series)
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
Input voltage
Dimension
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Operating temperature
100 - 240V AC 50 / 60Hz
A
Error output
Approximately 1kg
Input voltage
Two-channel maximum, output of 0.8A for each channel
(for connection to all lights except the MCEP Series)
Lighting on/off function
Natural air cooling
Dimension
200V
Single-channel output of 0.8A
(for connection to all lights except the MCEP Series)
Output system
Horizontal installation on the rubber supports at the bottom of the unit
Output
MLEK-A080W2RD-200V
100V
Operating temperature
Natural air cooling
AC Type
MLEK-A080W2LRD-100V
200V
Output
Horizontal installation on the rubber supports at the bottom of the unit
Weight
MLEK-A080W1LRD-200V
100V
Input voltage
0 to +45˚C
Output system
MLEK-A080W1LRD-100V
Dimension
Continuous DC output
Operating temperature
Model
AC Type
Single-channel output of 0.8A
(for connection to all lights except the MCEP Series)
Output
A
B
Input current
0.7 / 0.4A
(at AC 100/240V)
0.7 / 0.4A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Operating temperature
Output system
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (0 to 5V dimmer signal / External VR input)
Supported (0 to 5V dimmer signal / External VR input)
External light control
Supported (8bit digital)
Supported ( for each channel, 8bit digital)
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Supported (photocoupler insulation, control error)
Installation
forcible air cooling
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1.1kg
Approximately 1.4kg
Weight
Connection Specifications
9
External VR dimmer signal input
External 0-5V Analog dimmer signal input
input GND
External 0-5V / external VR input switching
2.5 VDC bias power supply output
NC
NC
15
Output ON/OFF signal (+)
Output ON/OFF signal (-)
NC
NC
Control error signal (open collector)
Control error signal (open emmitter)
NC
NC
ON/OFF
A
Relay
A
A
Photo-coupler
B(MLEK-A
1
2
47k
3.9k
Transistor
5V=1.3k
24V=6.2k
5V=1.3k
24V=6.2k
Error
10k
10
170
190
15
MLEK-A080W LRD/MLEK-A230W LRD
1
8
5V,24V
8bit digital input 20 (LSB)
8bit digital input 21
8bit digital input 22
8bit digital input 23
8bit digital input 24
8bit digital input 25
8bit digital input 26
8bit digital input 27 (MSB)
5V
COMMON
A
A
A
LSB
9
1
47k
3.9k
5V
Relay
Photo-coupler
Transistor
47k
A
MSB
8
11
12
13
A (MLEK-A
5V,24V
5V,24V
W1LRD)
5V
3.9k
47k
Dimensions
330
B (MLEK-A
W2LRD)
A
ON/OFF
10
3.9k
5V
B
B
Error
330
11
5V=1.3k
24V=6.2k
5V
5k
10k
* Note: The AC power cable that is enclosed depends on the voltage.
Be sure to use a suitable power supply for the country in which the Controller is used.
2.5V Ref
90
6
55
75
I/O Circuit Diagrams
5V
5
6
9
10
W2LR)
110
6
90
COMMON (+)
Output ON/OFF signal
Control error signal output
NC
NC
NC
NC
5V
5V,24V
5V,24V
5V,24V
LSB
B
130
150
Approximately 1.4kg
MLEK-A080W LRD/MLEK-A230W LRD
5V,24V
A
10
Approximately 1.1kg
Connection Specifications
0-5V
55
75
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
9
B
W1LR)
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Weight
MLEK-A080W LR/MLEK-A230W LR
Dimensions
A (MLEK-A
Installation
1
8
Supported (photocoupler insulation, control error)
Cooling system
I/O Circuit Diagrams
MLEK-A080W LR/MLEK-A230W LR
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
55
75
10
130
150
200V
55
75
6
Cooling system
Error output
Supported (photocoupler insulation)
110
Error output
Lighting on/off function
6
Lighting on/off function
18
NEW MLEK
10
170
190
100V
CE
(PS) E/UL/CSA
(PS) E
Adapter
(for use in Japan only)
19
New Power Supplies for MG-Wave Series
These new power supplies are designed specifically for Moritex Constant-current LED Lights (except for the MCEP Series).
Even when combining with an LED Light from the broad lineup and possible applications, you can select the ideal
Constant-current Power Supply for the required current consumption. The Power Supplies suppress heat generation and will
make the most of the characteristics of any of the LED Light. External output controls and other features are also provided.
A080/230W
Series
Model Number Legend
3Z4S-LT MLEK-A
W LR
A080/230W
V
AC type
Digital type (D)
Output
channel
Maximum output current
Analog Series (Total current: 0.8 A or 2.3 A)
-
Digtal Series (Total current: 0.8 A or 2.3 A)
Models are available with an analog light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Models are available with a digital light adjustment and for either one or two channels. A wide voltage input (100 to 240 VAC) is supported, along with CE Marking.
Ratings and Specifications
Ratings and Specifications
Model
MLEK-A080W1LR-100V
MLEK-A080W1LR-200V
MLEK-A080W2LR-100V
MLEK-A080W2R-200V
100V
200V
100V
200V
AC Type
Two-channel maximum, output of 0.8A for each channel
(for connection to all lights except the MCEP Series)
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
A
B
Input current
0.3 / 0.15A
(at AC 100/240V)
0.3 / 0.15A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
Input voltage
Dimension
0 to +45˚C
Continuous DC output
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (0 to 5V)
Supported (0 to 5V)
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Supported (photocoupler insulation, control error)
Lighting on/off function
Error output
Cooling system
Installation
Model
Approximately 1.3kg
B
Input current
0.3 / 0.15A
(at AC 100/240V)
0.3 / 0.15A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (8bit digital)
Supported ( for each channel, 8bit digital)
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Supported (photocoupler insulation, control error)
Installation
Natural air cooling
Natural air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1kg
Approximately 1.3kg
Weight
MLEK-A230W1LR-200V
MLEK-A230W2LR-100V
MLEK-A230W2LR-200V
100V
200V
100V
200V
Model
MLEK-A230W1LRD-100V
MLEK-A230W1LRD-200V
MLEK-A230W2LRDB-100V
MLEK-A230W2LRDB-200V
100V
200V
100V
200V
AC Type
Single-channel output of 2.3A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 2.3A for each channel
(for connection to all lights except the MCEP Series)
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
A
B
Input current
0.7 / 0.4A
(at AC 100/240V)
0.7 / 0.4A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
Output system
100 - 240V AC 50 / 60Hz
Cooling system
MLEK-A230W1LR-100V
Output
Single-channel output of 2.3A
(for connection to all lights except the MCEP Series)
Two-channel maximum, output of 2.3A for each channel
(for connection to all lights except the MCEP Series)
100 - 240V AC 50 / 60Hz
100 - 240V AC 50 / 60Hz
Input voltage
Dimension
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Operating temperature
100 - 240V AC 50 / 60Hz
A
Error output
Approximately 1kg
Input voltage
Two-channel maximum, output of 0.8A for each channel
(for connection to all lights except the MCEP Series)
Lighting on/off function
Natural air cooling
Dimension
200V
Single-channel output of 0.8A
(for connection to all lights except the MCEP Series)
Output system
Horizontal installation on the rubber supports at the bottom of the unit
Output
MLEK-A080W2RD-200V
100V
Operating temperature
Natural air cooling
AC Type
MLEK-A080W2LRD-100V
200V
Output
Horizontal installation on the rubber supports at the bottom of the unit
Weight
MLEK-A080W1LRD-200V
100V
Input voltage
0 to +45˚C
Output system
MLEK-A080W1LRD-100V
Dimension
Continuous DC output
Operating temperature
Model
AC Type
Single-channel output of 0.8A
(for connection to all lights except the MCEP Series)
Output
A
B
Input current
0.7 / 0.4A
(at AC 100/240V)
0.7 / 0.4A
(at AC 100/240V)
Surge current
15A or lower (at 100V AC)
35A or lower (at 240V AC)
15A or lower (at 100V AC)
35A or lower (at 240V AC)
0 to +45˚C
0 to +45˚C
Continuous DC output
Continuous DC output
Operating temperature
Output system
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
Output control system
Constant current control (the current can be changed)
Constant current control (the current can be changed)
External light control
Supported (0 to 5V dimmer signal / External VR input)
Supported (0 to 5V dimmer signal / External VR input)
External light control
Supported (8bit digital)
Supported ( for each channel, 8bit digital)
Supported (photocoupler insulation)
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
Supported (photocoupler insulation, control error)
Installation
forcible air cooling
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Horizontal installation on the rubber supports at the bottom of the unit
Approximately 1.1kg
Approximately 1.4kg
Weight
Connection Specifications
9
External VR dimmer signal input
External 0-5V Analog dimmer signal input
input GND
External 0-5V / external VR input switching
2.5 VDC bias power supply output
NC
NC
15
Output ON/OFF signal (+)
Output ON/OFF signal (-)
NC
NC
Control error signal (open collector)
Control error signal (open emmitter)
NC
NC
ON/OFF
A
Relay
A
A
Photo-coupler
B(MLEK-A
1
2
47k
3.9k
Transistor
5V=1.3k
24V=6.2k
5V=1.3k
24V=6.2k
Error
10k
10
170
190
15
MLEK-A080W LRD/MLEK-A230W LRD
1
8
5V,24V
8bit digital input 20 (LSB)
8bit digital input 21
8bit digital input 22
8bit digital input 23
8bit digital input 24
8bit digital input 25
8bit digital input 26
8bit digital input 27 (MSB)
5V
COMMON
A
A
A
LSB
9
1
47k
3.9k
5V
Relay
Photo-coupler
Transistor
47k
A
MSB
8
11
12
13
A (MLEK-A
5V,24V
5V,24V
W1LRD)
5V
3.9k
47k
Dimensions
330
B (MLEK-A
W2LRD)
A
ON/OFF
10
3.9k
5V
B
B
Error
330
11
5V=1.3k
24V=6.2k
5V
5k
10k
* Note: The AC power cable that is enclosed depends on the voltage.
Be sure to use a suitable power supply for the country in which the Controller is used.
2.5V Ref
90
6
55
75
I/O Circuit Diagrams
5V
5
6
9
10
W2LR)
110
6
90
COMMON (+)
Output ON/OFF signal
Control error signal output
NC
NC
NC
NC
5V
5V,24V
5V,24V
5V,24V
LSB
B
130
150
Approximately 1.4kg
MLEK-A080W LRD/MLEK-A230W LRD
5V,24V
A
10
Approximately 1.1kg
Connection Specifications
0-5V
55
75
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
9
B
W1LR)
forcible air cooling
Horizontal installation on the rubber supports at the bottom of the unit
Weight
MLEK-A080W LR/MLEK-A230W LR
Dimensions
A (MLEK-A
Installation
1
8
Supported (photocoupler insulation, control error)
Cooling system
I/O Circuit Diagrams
MLEK-A080W LR/MLEK-A230W LR
Supported (photocoupler insulation)
Supported (photocoupler insulation, control error)
55
75
10
130
150
200V
55
75
6
Cooling system
Error output
Supported (photocoupler insulation)
110
Error output
Lighting on/off function
6
Lighting on/off function
18
NEW MLEK
10
170
190
100V
CE
(PS) E/UL/CSA
(PS) E
Adapter
(for use in Japan only)
19
NEW MLEK
Series
Model Number Legend Multichannel series
3Z4S-LT MLEK- D770W4LRD-
Optional Accessories
V
AC type
* When ordering, provide the specific model number after "SZ4S-LT" (example: SZ4S-LT MDF-DR10).
Multichannel series
■Options for lights
The following optional accessories are available to improve the functionality of the lighting devices.
Diffusion plate:MDF Series
Models are available with a digital light adjustment and for four
channels. A wide voltage input (100 to 240 VAC) is supported,
along with Rohs compliance.
The digital light adjustment provides the previous 8-bit, 256-step
control and a new 10-bit, 1,024-step control.
The MDF series features a diffusion plate that increases the light diffusion and reduces reflection and glare from the element.
Model
New
*CE Marking.
Ratings and Specifications
Model
MLEK-D770W4LRD-100V
MLEK-D770W4LRD-200V
100V
200V
AC Type
4-channel output Total max. 7.7A (CH1 CH3:max. 2.3A CH4:max. 0.8A)
(for connection to all lights except the MCEP Series)
Output
Input voltage
100 - 240V AC 50 / 60Hz
Input current
A
1.7/0.8 A
(at AC 100/240V)
Surge current
18A or lower (at 100V AC)
41A or lower (at 230V AC)
Dimension
Operating temperature
Compatible light models
Square oblique light diffusion plate
MDQL-CR(CG,CB,CW) for 108, 4 pieces/set
MDF-DR10
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 10
MDF-DR16
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 16
MDF-DR28
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 28
MDF-DR31
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 31
MDF-DR50
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 50
MDF-DR56
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 56
MDF-LR25
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 25
MDF-LR48
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 48
MDF-LR68
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 68
MDF-LR100
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 100
MDF-BR5015
Diffusion plate for bar lights
MBRL-CR (CG,CB,CW) for 5015
MDF-BR7530
Diffusion plate for bar lights
MBRL-CR (CG,CB,CW) for 7530
MDF-BR13015
Diffusion plate for bar lights
MBRL-CR (CG,CB,CW) for 13015
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Polarizing plate:MPL Series
The MPL series polarizing plates are attached to LEDs with Moritex’s lenses in order to reduce unwanted glare and reflection during image processing.
0 to +45˚C
Output system
Product type
MDF-DQ108
Model
Product type
Compatible light models
Continuous DC output
New
MPL-DQ108
Square oblique light polarizing plate
MDQL-CR(CG,CB,CW) for 108, 4 pieces/set
Output control system
Constant current control (the current can be changed)
New
MPL-SC56
Simulated coaxial light polarizing plate
MSCL-CR (CG,CB,CW) for 56
External light control
Supported ( for each channel, 8bit digital or 10 bit digital)
New
MPL-SC74
Simulated coaxial light polarizing plate
MSCL-CR (CG,CB,CW) for 72
Supported (photocoupler insulation)
New
MPL-SC105
Simulated coaxial light polarizing plate
MSCL-CR (CG,CB,CW) for 105
Supported (photocoupler insulation, control error)
MPL-DR10-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 10
forcible air cooling
MPL-DR16-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 16
Horizontal installation on the rubber supports at the bottom of the unit
MPL-DR28-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 28
Approximately 2kg
MPL-DR31-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 31
MPL-DR50-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 50
MPL-DR56-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 56
MPL-BR5015-B
Polarizing plate for bar lights
MBRL-CR (CG,CB,CW) for 5015
MPL-BR7530-B
Polarizing plate for bar lights
MBRL-CR (CG,CB,CW) for 7530
MPL-BR13015-B
Polarizing plate for bar lights
MBRL-CR (CG,CB,CW) for 13015
Lighting on/off function
Error output
Cooling system
Installation
Weight
Connection Specifications
I/O Circuit Diagrams
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
5V,24V
MLEK-D770W4LRD
14
MLEK-D770W4LRD
1
CH3 Output ON/OFF signal
CH4 Output ON/OFF signal
CH1 Control error signal
CH2 Control error signal
CH3 Control error signal
CH4 Control error signal
CH Select
CH Select
Write TRG
NC
NC
NC
25
13
10bit digital input 20 (10bit/LSB)
10bit digital input 21
10bit digital input 20 (8bit/LSB)
10bit digital input 23
10bit digital input 24
10bit digital input 25
10bit digital input 26
10bit digital input 27
10bit digital input 28
10bit digital input 29 (MSB)
COMMON(+)
CH1 Output ON/OFF signal
CH2 Output ON/OFF signal
A
5V
COMMON
9
A
A
LSB
1
Adapter : MAD Series
47k
3.9k
5V
Relay
Photo-coupler
Transistor
The MAD series is essential when a diffusion or polarizing plate is attached to a ring light.
47k
A
MSB
8
5V
3.9k
47k
5V,24V
A
5V,24V
ON/OFF
10
3.9k
5V
B
B
Error
5V=1.3k
24V=6.2k
11
330
Model
Product type
How to use the MAD series
Compatible light models
MAD-DR10
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 10
MAD-DR16
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 16
MAD-DR28
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 28
Diffusion or polarizing plate
MAD-DR31
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 31
MAD-DR50
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 50
MAD series adapter
(fastened with three screws)
MAD-DR56
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 56
Ring light
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Dimensions
Light control film : MLM Series
A (MLEK-D770W4LRD)
MLEK-D770W4LRD
The MLM series are resin films that transform diffused light into
near-parallel light. Attached to a simulated coaxiallight,
it makes the light distribution pattern smoother.
OUT4
CORPORATION
MLEK-D770W4LRD
FINE
OUT3
OUT2
OUT1
FAN3
FAN2
FAN1
Cross-section of pseudo
coaxial epi-illumination
Haif mirror
Lighting part
(Mounted in groove)
Diffusion board
Lighting intensity distribution charateristics of the MSCL-CR105
COARSE
CH 1
Model
F
F
EXT
1
120
Usage for
the MLM Series
CH 2
2
3
4
5
6
7
8
9 10 11 12 13
Product type
Compatible light models
2D luminance level diagram
2D luminance level diagram
14 15 16 17 18 19 20 21 22 23 24 25
0
0
MAINS Supply
CH 3
0
Light control fi lm for simulated coaxial lights
MSCL-CR (CG,CB,CW) for 56
MLM-SC74
Light control fi lm for simulated coaxial lights
MSCL-CR (CG,CB,CW) for 74
MLM-SC105
Light control fi lm for simulated coaxial lights
MSCL-CR (CG,CB,CW) for 105
0
CH 4
0
MLM-SC56
0
POWER
REMO
55
100
MANU
200
220
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Lighting intensity distribution characteristics
without a light control film
20
Lighting intensity distribution characteristics with a light
control film (with the power source volume increased)
21
NEW MLEK
Series
Model Number Legend Multichannel series
3Z4S-LT MLEK- D770W4LRD-
Optional Accessories
V
AC type
* When ordering, provide the specific model number after "SZ4S-LT" (example: SZ4S-LT MDF-DR10).
Multichannel series
■Options for lights
The following optional accessories are available to improve the functionality of the lighting devices.
Diffusion plate:MDF Series
Models are available with a digital light adjustment and for four
channels. A wide voltage input (100 to 240 VAC) is supported,
along with Rohs compliance.
The digital light adjustment provides the previous 8-bit, 256-step
control and a new 10-bit, 1,024-step control.
The MDF series features a diffusion plate that increases the light diffusion and reduces reflection and glare from the element.
Model
New
*CE Marking.
Ratings and Specifications
Model
MLEK-D770W4LRD-100V
MLEK-D770W4LRD-200V
100V
200V
AC Type
4-channel output Total max. 7.7A (CH1 CH3:max. 2.3A CH4:max. 0.8A)
(for connection to all lights except the MCEP Series)
Output
Input voltage
100 - 240V AC 50 / 60Hz
Input current
A
1.7/0.8 A
(at AC 100/240V)
Surge current
18A or lower (at 100V AC)
41A or lower (at 230V AC)
Dimension
Operating temperature
Compatible light models
Square oblique light diffusion plate
MDQL-CR(CG,CB,CW) for 108, 4 pieces/set
MDF-DR10
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 10
MDF-DR16
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 16
MDF-DR28
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 28
MDF-DR31
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 31
MDF-DR50
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 50
MDF-DR56
Diffusion plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 56
MDF-LR25
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 25
MDF-LR48
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 48
MDF-LR68
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 68
MDF-LR100
Diffusion plate for low-angle ring lights
MLRL-CR (CG,CB,CW) for 100
MDF-BR5015
Diffusion plate for bar lights
MBRL-CR (CG,CB,CW) for 5015
MDF-BR7530
Diffusion plate for bar lights
MBRL-CR (CG,CB,CW) for 7530
MDF-BR13015
Diffusion plate for bar lights
MBRL-CR (CG,CB,CW) for 13015
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Polarizing plate:MPL Series
The MPL series polarizing plates are attached to LEDs with Moritex’s lenses in order to reduce unwanted glare and reflection during image processing.
0 to +45˚C
Output system
Product type
MDF-DQ108
Model
Product type
Compatible light models
Continuous DC output
New
MPL-DQ108
Square oblique light polarizing plate
MDQL-CR(CG,CB,CW) for 108, 4 pieces/set
Output control system
Constant current control (the current can be changed)
New
MPL-SC56
Simulated coaxial light polarizing plate
MSCL-CR (CG,CB,CW) for 56
External light control
Supported ( for each channel, 8bit digital or 10 bit digital)
New
MPL-SC74
Simulated coaxial light polarizing plate
MSCL-CR (CG,CB,CW) for 72
Supported (photocoupler insulation)
New
MPL-SC105
Simulated coaxial light polarizing plate
MSCL-CR (CG,CB,CW) for 105
Supported (photocoupler insulation, control error)
MPL-DR10-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 10
forcible air cooling
MPL-DR16-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 16
Horizontal installation on the rubber supports at the bottom of the unit
MPL-DR28-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 28
Approximately 2kg
MPL-DR31-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 31
MPL-DR50-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 50
MPL-DR56-B
Polarizing plate for direct-ring lights
MDRL-CR (CG,CB,CW) for 56
MPL-BR5015-B
Polarizing plate for bar lights
MBRL-CR (CG,CB,CW) for 5015
MPL-BR7530-B
Polarizing plate for bar lights
MBRL-CR (CG,CB,CW) for 7530
MPL-BR13015-B
Polarizing plate for bar lights
MBRL-CR (CG,CB,CW) for 13015
Lighting on/off function
Error output
Cooling system
Installation
Weight
Connection Specifications
I/O Circuit Diagrams
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
5V,24V
MLEK-D770W4LRD
14
MLEK-D770W4LRD
1
CH3 Output ON/OFF signal
CH4 Output ON/OFF signal
CH1 Control error signal
CH2 Control error signal
CH3 Control error signal
CH4 Control error signal
CH Select
CH Select
Write TRG
NC
NC
NC
25
13
10bit digital input 20 (10bit/LSB)
10bit digital input 21
10bit digital input 20 (8bit/LSB)
10bit digital input 23
10bit digital input 24
10bit digital input 25
10bit digital input 26
10bit digital input 27
10bit digital input 28
10bit digital input 29 (MSB)
COMMON(+)
CH1 Output ON/OFF signal
CH2 Output ON/OFF signal
A
5V
COMMON
9
A
A
LSB
1
Adapter : MAD Series
47k
3.9k
5V
Relay
Photo-coupler
Transistor
The MAD series is essential when a diffusion or polarizing plate is attached to a ring light.
47k
A
MSB
8
5V
3.9k
47k
5V,24V
A
5V,24V
ON/OFF
10
3.9k
5V
B
B
Error
5V=1.3k
24V=6.2k
11
330
Model
Product type
How to use the MAD series
Compatible light models
MAD-DR10
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 10
MAD-DR16
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 16
MAD-DR28
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 28
Diffusion or polarizing plate
MAD-DR31
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 31
MAD-DR50
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 50
MAD series adapter
(fastened with three screws)
MAD-DR56
Plate attachment adapter for direct-ring lights
MDRL-CR (CG,CB,CW) for 56
Ring light
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Dimensions
Light control film : MLM Series
A (MLEK-D770W4LRD)
MLEK-D770W4LRD
The MLM series are resin films that transform diffused light into
near-parallel light. Attached to a simulated coaxiallight,
it makes the light distribution pattern smoother.
OUT4
CORPORATION
MLEK-D770W4LRD
FINE
OUT3
OUT2
OUT1
FAN3
FAN2
FAN1
Cross-section of pseudo
coaxial epi-illumination
Haif mirror
Lighting part
(Mounted in groove)
Diffusion board
Lighting intensity distribution charateristics of the MSCL-CR105
COARSE
CH 1
Model
F
F
EXT
1
120
Usage for
the MLM Series
CH 2
2
3
4
5
6
7
8
9 10 11 12 13
Product type
Compatible light models
2D luminance level diagram
2D luminance level diagram
14 15 16 17 18 19 20 21 22 23 24 25
0
0
MAINS Supply
CH 3
0
Light control fi lm for simulated coaxial lights
MSCL-CR (CG,CB,CW) for 56
MLM-SC74
Light control fi lm for simulated coaxial lights
MSCL-CR (CG,CB,CW) for 74
MLM-SC105
Light control fi lm for simulated coaxial lights
MSCL-CR (CG,CB,CW) for 105
0
CH 4
0
MLM-SC56
0
POWER
REMO
55
100
MANU
200
220
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Lighting intensity distribution characteristics
without a light control film
20
Lighting intensity distribution characteristics with a light
control film (with the power source volume increased)
21
MEMO
■Options for bridging lights with lenses
The following optional adapters are designed to be used with Moritex’s lenses.
Simulated Coaxial Light/CCTV Lens Adapter: MLA-SC Series
The MLA-SC Series enables small siulated coaxial lights to be mounted at the end of CCTV lenses.
Model
Product type
How to use the MLA-SC series
Compatible light models
CCTV lens
MLA-SCBS
Mount base for simulated coaxial lights
MSCL-C 24/39/56
MLA-SCM255
Base/lens adapter for simulated coaxial lights
Filter screw: M25.5P0.5 lens
MLA-SCM270
Base/lens adapter for simulated coaxial lights
Filter screw: M27P0.5 lens
MLA-SCM305
Base/lens adapter for simulated coaxial lights
Filter screw: M30.5P0.5 lens
Base/lens adapter
Base unit
Simulated
coaxial light
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
*Do not apply any unnecessary load to the lens.
The rotation angle is adjustable after
fastening the light to the lens.
MML/CCTV Lens Adapter
The adapter can be easily used in combination with CCTV lenses.
Model
Product type
Compatible light models
How to use the MLA-DR series
MLA-DR1616
Lens attachment adapter
MDRL-C 16 and R-16 mm lenses
MLA-DR3125
Lens attachment adapter
MDRL-C 31 and R-25 mm lenses
MLA-DR3130
Lens attachment adapter
MDRL-C 31 and R-30 mm lenses
MLA-DR31M255
Lens attachment adapter
MDRL-C 31 and M25.5P0.5 lenses
MLA-DR31M270
Lens attachment adapter
MDRL-C 31 and M27P0.5 lenses
MLA-DR31M305
Lens attachment adapter
MDRL-C 31 and M30.5P0.5 lenses
Lens
MLA-DR series
Direct-ring light
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Sharp-cut Filter R64 Series
These Files can be attached to the end of a CCTV lens to prevent light interference when using red light.
Model
Product type
Size
ML-R64-25
Sharp-cut filter for mounting to end of lens
Filter screw: M25.5 P0.5 lenz
ML-R64-27
Sharp-cut filter for mounting to end of lens
Filter screw: M27 P0.5 lenz
ML-R64-30
Sharp-cut filter for mounting to end of lens
Filter screw: M30.5 P0.5 lenz
Cables
Cable Diagram
Model
Product type
Applications
Length
M-RCB401L
A
4-pin type extension cable
M-RCB402L
A
4-pin type extension cable
M-RCB403L
A
4-pin type extension cable
M-RCB301L
B
3-pin type extension cable
M-RCB302L
B
3-pin type extension cable
M-RCB303L
B
3-pin type extension cable
M-XS402C
C
Pin type extension cable
M-XS405C
C
Pin type extension cable
M-XS410C
C
Pin type extension cable
M-RCB301XS
D
Pin type MSPP-MLEP-A070 conversion cable
M-RCB001L
E
2-pin type extension cable
M-RCB002L
E
2-pin type extension cable
M-RCB003L
E
2-pin type extension cable
3m
MC-EXC-02
―
Cable for DSUB15 pin external control
2m
MC-EXC-07
―
Cable for DSUB15 pin external control
1m
For all lights (except the MCEP series)
2m
3m
1m
For the MCEP series
2m
3m
2m
5m
For the MSPP series
10m
For the MSPP series and MLEP-A070
1m
1m
For power sources for built-in fans
2m
C (M-XS4
C)
D (M-RCB301XS)
RoHS
4P
12
5.7
dia
L*Straight connection)
.
A (M-RCB4
4P
(1000,2000,3000)
1P
1
3
1P
L*Straight connection)
(1000,2000,3000)
3P
1P
1
2
4
3
Female
40.5
100±20
X
Male
44.7
2
1
3
4
100±20
E (M-RCB0
0+0
-2
3P
1P
0
12+2-0 4 -2
22+10
-0
L*Straight connection)
2P
2P
1P
22
43.2
White/yellow
(no connection)
1000+50
-0
6
3P
RoHS
B (M-RCB3
39.5±5
4
14.9
2
1P
40.0±5
Cable Diagrams
(1000,2000,3000)
1P
23
MEMO
■Options for bridging lights with lenses
The following optional adapters are designed to be used with Moritex’s lenses.
Simulated Coaxial Light/CCTV Lens Adapter: MLA-SC Series
The MLA-SC Series enables small siulated coaxial lights to be mounted at the end of CCTV lenses.
Model
Product type
How to use the MLA-SC series
Compatible light models
CCTV lens
MLA-SCBS
Mount base for simulated coaxial lights
MSCL-C 24/39/56
MLA-SCM255
Base/lens adapter for simulated coaxial lights
Filter screw: M25.5P0.5 lens
MLA-SCM270
Base/lens adapter for simulated coaxial lights
Filter screw: M27P0.5 lens
MLA-SCM305
Base/lens adapter for simulated coaxial lights
Filter screw: M30.5P0.5 lens
Base/lens adapter
Base unit
Simulated
coaxial light
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
*Do not apply any unnecessary load to the lens.
The rotation angle is adjustable after
fastening the light to the lens.
MML/CCTV Lens Adapter
The adapter can be easily used in combination with CCTV lenses.
Model
Product type
Compatible light models
How to use the MLA-DR series
MLA-DR1616
Lens attachment adapter
MDRL-C 16 and R-16 mm lenses
MLA-DR3125
Lens attachment adapter
MDRL-C 31 and R-25 mm lenses
MLA-DR3130
Lens attachment adapter
MDRL-C 31 and R-30 mm lenses
MLA-DR31M255
Lens attachment adapter
MDRL-C 31 and M25.5P0.5 lenses
MLA-DR31M270
Lens attachment adapter
MDRL-C 31 and M27P0.5 lenses
MLA-DR31M305
Lens attachment adapter
MDRL-C 31 and M30.5P0.5 lenses
Lens
MLA-DR series
Direct-ring light
An asterisk (*) in “compatible light models” refers to any LED color (R,G,B or W) of the light.
Sharp-cut Filter R64 Series
These Files can be attached to the end of a CCTV lens to prevent light interference when using red light.
Model
Product type
Size
ML-R64-25
Sharp-cut filter for mounting to end of lens
Filter screw: M25.5 P0.5 lenz
ML-R64-27
Sharp-cut filter for mounting to end of lens
Filter screw: M27 P0.5 lenz
ML-R64-30
Sharp-cut filter for mounting to end of lens
Filter screw: M30.5 P0.5 lenz
Cables
Cable Diagram
Model
Product type
Applications
Length
M-RCB401L
A
4-pin type extension cable
M-RCB402L
A
4-pin type extension cable
M-RCB403L
A
4-pin type extension cable
M-RCB301L
B
3-pin type extension cable
M-RCB302L
B
3-pin type extension cable
M-RCB303L
B
3-pin type extension cable
M-XS402C
C
Pin type extension cable
M-XS405C
C
Pin type extension cable
M-XS410C
C
Pin type extension cable
M-RCB301XS
D
Pin type MSPP-MLEP-A070 conversion cable
M-RCB001L
E
2-pin type extension cable
M-RCB002L
E
2-pin type extension cable
M-RCB003L
E
2-pin type extension cable
3m
MC-EXC-02
―
Cable for DSUB15 pin external control
2m
MC-EXC-07
―
Cable for DSUB15 pin external control
1m
For all lights (except the MCEP series)
2m
3m
1m
For the MCEP series
2m
3m
2m
5m
For the MSPP series
10m
For the MSPP series and MLEP-A070
1m
1m
For power sources for built-in fans
2m
C (M-XS4
C)
D (M-RCB301XS)
RoHS
4P
12
5.7
dia
L*Straight connection)
.
A (M-RCB4
4P
(1000,2000,3000)
1P
1
3
1P
L*Straight connection)
(1000,2000,3000)
3P
1P
1
2
4
3
Female
40.5
100±20
X
Male
44.7
2
1
3
4
100±20
E (M-RCB0
0+0
-2
3P
1P
0
12+2-0 4 -2
22+10
-0
L*Straight connection)
2P
2P
1P
22
43.2
White/yellow
(no connection)
1000+50
-0
6
3P
RoHS
B (M-RCB3
39.5±5
4
14.9
2
1P
40.0±5
Cable Diagrams
(1000,2000,3000)
1P
23
NEW
LED Lighting System
3Z4S-LT/LE Series
Datasheet
,%$.%84'%.%2!4)/.
This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user must
understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
/-2/.#ORPORATION)NDUSTRIAL!UTOMATION#OMPANY
!UTHORIZED$ISTRIBUTOR
4OKYO*!0!.
#ONTACTWWWIAOMRONCOM
2EGIONAL(EADQUARTERS
/-2/.%52/0%"6
7EGALAAN*$(OOFDDORP
4HE.ETHERLANDS
4EL&AX
/-2/.%,%#42/.)#3,,#
/NE#OMMERCE$RIVE3CHAUMBURG
),53!
4EL&AX
/-2/.!3)!0!#)&)#04%,4$
.O!!LEXANDRA2OAD,OBBY
!LEXANDRA4ECHNOPARK
3INGAPORE
4EL&AX
/-2/.#().!#/,4$
2OOM"ANKOF#HINA4OWER
9IN#HENG:HONG2OAD
0U$ONG.EW!REA3HANGHAI#HINA
4EL&AX
©/-2/.#ORPORATION!LL2IGHTS2ESERVED
)NTHEINTERESTOFPRODUCTIMPROVEMENT
SPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE
#3-?8??0415
0RINTEDIN*APAN
#AT.O1%