FERROXCUBE DATA A SH SHEET EET Multilayer suppressors EMI-suppression products Supersedes data of February 2002 2004 Sep 01 Ferroxcube Multilayer suppressors EMI-suppression products Main applications areas for multilayer suppressors are: • computer and peripheral equipment: mother board, notebook, CD-Rom, DVD-Rom, CD-RW, scanner, hard disc, VGA card, sound card, LCD monitor, printer, PC server thumb drive, PCMCIA card, graphic card, etc. MULTILAYER SUPPRESSORS Multilayer suppressors are a powerful solution for EMI/RFI attenuation for electronic equipment. Supplied in seven standard sizes (0402, 0603, 0805, 1206, 1210, 1806 and 1812), they have impedances between 6 and 2 000 Ω at 100 MHz. • network: LAN card, hub, switcher, router set top box, etc. When installed in series with signal and/or power circuits, high frequency noise is suppressed. There is no need for ground termination, which makes these devices very suitable for circuits with difficult ground. Typical suppression frequencies range from 10 MHz to 1 000 MHz and rated currents are between 0.1 and 6 A. • telecom: cell phone, ADSL, wired modem, cable modem, ISDN, GPS satellite receiver, etc. • consumer: walkman, walkdisc, digital still camera (DSC), sound system, HDTV, projector, DVD player, VCD player, tuner for TV, cable modem, etc. Multilayer suppressors are specially designed to reduce noise in low impedance circuits while keeping the signal free from distortion. This is because at the interfering frequencies these components behave as a resistor. The high frequency noise is converted into heat rather than reflected to the source. This dissipation prevents ringing and parasitic oscillations. To help designers in the trial and error process of finding the most suitable suppression component, we offer a sample box with a selection of products. Ordering code: SAMPLEBOX12 These characteristics can be used for many different purposes: • Absorption of generated noise. • Filtering and wave-shape correction of digital signals from high speed clock oscillators. • Prevention of high frequency interference entering circuit electronics. Features • Monolithic structure for closed magnetic path and highreliability • Standard EIA and EIAJ sizes: 0402, 0603, 0805, 1206, 1210, 1806 and 1812 • High impedance per volume which leads to effective high density circuits • Suitable for wave and reflow soldering • Plating material lead-free • Wide range of impedance values • Superior physical properties • Available in standard EIA and EIAJ tape-and-reel • Operating temperature -40°C to +125°C • 100% sorting out on impedance 2004 Sep 01 2 Ferroxcube Multilayer suppressors EMI-suppression products TYPE NUMBER STRUCTURE Multilayer Suppressor MLS0603-4S7-600 Type numbers for these products consist of the following: TYPE • Product type • Size MLS • Impedance. SIZE INTERNAL CODE IMPEDANCE 0603 4S7 60 Multilayer Power Bead MLP0603-121 Product type TYPE MLS: Multilayer Suppressor. MLP MLP: Multilayer Power Beads. SIZE IMPEDANCE 0603 120 Multilayer Narrow Band MLN0603-601 MLN: Multilayer Narrow Band. TYPE Size MLN 0402: 1.0 × 0.5 × 0.5 mm IMPEDANCE 0603 600 Standard products are delivered taped on reel and have a tolerance on impedance of 25%. 0603: 1.6 × 0.8 × 0.8 mm 0805: 2.0 × 1.25 × 0.9 mm 1206: 3.2 × 1.6 × 1.1 mm 1210: 3.2 × 2.5 × 1.3 mm 1806: 4.5 × 1.6 × 1.6 mm 1812: 4.5 × 3.2 × 1.5 mm. Impedance value Expressed in ohms (Ω) First two digits are significant figures Last digit is the number of zeros to follow. EXAMPLES 600: 60 Ω 101: 100 Ω 121: 120 Ω 151: 150 Ω 301: 300 Ω 102: 1000 Ω 2004 Sep 01 SIZE 3 Ferroxcube Multilayer Suppressors EMI-suppression products MULTILAYER SUPPRESSORS A D B C MFW041 Fig.0 Outline of MLS-MLP-MLN. Product dimensions of Multilayer Suppressors MLS - MLP - MLN A B C D mass (mg) 0402 1.0 ± 0.15 0.5 ± 0.15 0.5 ± 0.15 0.25 ± 0.15 ≈1 0603 1.6 ± 0.20 0.8 ± 0.15 0.8 ± 0.15 0.3 ± 0.20 ≈5 0805 2.0 ± 0.20 1.25 ± 0.20 0.9 ± 0.20 0.5 ± 0.30 ≈ 11 1206 3.2 ± 0.20 1.6 ± 0.20 1.1 ± 0.20 0.5 ± 0.30 ≈ 28 1210 3.2 ± 0.20 2.5 ± 0.20 1.3 ± 0.20 0.5 ± 0.30 ≈ 50 1806 4.5 ± 0.25 1.6 ± 0.20 1.6 ± 0.20 0.5 ± 0.30 ≈ 55 1812 4.5 ± 0.25 3.2 ± 0.20 1.5 ± 0.20 0.5 ± 0.30 ≈ 100 SIZE 2004 Sep 01 4 Ferroxcube EMI-suppression products Multilayer suppressors Product specifications Multilayer Suppressors MLS SIZE 0402 0603 0805 2004 Sep 01 |Ztyp| at 100 MHz (Ω) RDC MAX. (Ω) I MAX. (mA) TYPE NUMBER 6 ± 25% 0.05 500 MLS0402-4S4-060 10 ± 25% 0.05 500 MLS0402-4S4-100 40 ± 25% 0.3 300 MLS0402-4S4-400 80 ± 25% 0.4 200 MLS0402-4S4-800 120 ± 25% 0.5 200 MLS0402-4S4-121 240 ± 25% 0.5 200 MLS0402-4S4-241 480 ± 25% 0.8 100 MLS0402-4S4-481 11 ± 25% 0.05 500 MLS0603-4S4-110 19 ± 25% 0.08 500 MLS0603-4S4-190 30 ± 25% 0.1 400 MLS0603-4S7-300 40 ± 25% 0.1 400 MLS0603-4S7-400 60 ± 25% 0.1 300 MLS0603-4S7-600 80 ± 25% 0.15 300 MLS0603-4S7-800 100 ± 25% 0.25 300 MLS0603-4S7-101 120 ± 25% 0.25 300 MLS0603-4S7-121 150 ± 25% 0.3 200 MLS0603-4S7-151 220 ± 25% 0.3 200 MLS0603-4S7-221 300 ± 25% 0.4 200 MLS0603-4S7-301 450 ± 25% 0.5 200 MLS0603-4S7-451 600 ± 25% 0.5 200 MLS0603-4S7-601 MLS0603-4S7-751 750 ± 25% 0.7 200 1000 ± 25% 0.7 200 MLS0603-4S7-102 1500 ± 25% 1 50 MLS0603-4S4-152 7 ± 25% 0.1 600 MLS0805-4S4-070 9 ± 25% 0.1 600 MLS0805-4S4-090 11 ± 25% 0.1 600 MLS0805-4S4-110 17 ± 25% 0.1 600 MLS0805-4S4-170 30 ± 25% 0.1 600 MLS0805-4S4-300 60 ± 25% 0.15 500 MLS0805-4S4-600 70 ± 25% 0.15 500 MLS0805-4S7-700 80 ± 25% 0.15 500 MLS0805-4S7-800 120 ± 25% 0.25 300 MLS0805-4S7-121 150 ± 25% 0.25 300 MLS0805-4S7-151 220 ± 25% 0.3 300 MLS0805-4S7-221 300 ± 25% 0.3 300 MLS0805-4S7-301 400 ± 25% 0.3 300 MLS0805-4S7-401 500 ± 25% 0.4 300 MLS0805-4S7-501 600 ± 25% 0.4 300 MLS0805-4S7-601 750 ± 25% 0.5 200 MLS0805-4S4-751 5 Ferroxcube EMI-suppression products SIZE 0805 1206 1210 1806 1812 Multilayer suppressors |Ztyp| at 100 MHz (Ω) RDC MAX. (Ω) I MAX. (mA) TYPE NUMBER 1000 ± 25% 0.5 200 MLS0805-4S7-102 1500(1) ± 25% 0.6 200 MLS0805-4S7-152 2000 ± 25% 0.8 100 MLS0805-4S4-202 19 ± 25% 0.05 600 MLS1206-4S4-190 26 ± 25% 0.05 600 MLS1206-4S4-260 30 ± 25% 0.05 600 MLS1206-4S4-300 50 ± 25% 0.1 500 MLS1206-4S4-500 60 ± 25% 0.1 500 MLS1206-4S4-600 70 ± 25% 0.1 500 MLS1206-4S4-700 90 ± 25% 0.15 500 MLS1206-4S4-900 120 ± 25% 0.15 500 MLS1206-4S4-121 150 ± 25% 0.15 500 MLS1206-4S4-151 200 ± 25% 0.2 400 MLS1206-4S4-201 400 ± 25% 0.2 400 MLS1206-4S4-401 500 ± 25% 0.2 400 MLS1206-4S4-501 600 ± 25% 0.3 400 MLS1206-4S4-601 1000(1) ± 25% 0.4 200 MLS1206-4S7-102 1200(1) ± 25% 0.4 200 MLS1206-4S7-122 2000(2) ± 25% 0.6 200 MLS1206-4S7-202 32 ± 25% 0.2 500 MLS1210-4S4-320 60 ± 25% 0.2 500 MLS1210-4S4-600 90 ± 25% 0.2 500 MLS1210-4S4-900 50 ± 25% 0.2 600 MLS1806-4S4-500 60 ± 25% 0.2 600 MLS1806-4S4-600 80 ± 25% 0.2 600 MLS1806-4S4-800 100 ± 25% 0.3 500 MLS1806-4S4-101 150 ± 25% 0.3 500 MLS1806-4S4-151 170 ± 25% 0.3 500 MLS1806-4S4-171 70 ± 25% 0.3 500 MLS1812-4S4-700 120 ± 25% 0.3 500 MLS1812-4S4-121 Note 1. at 50 MHz 2. at 30 MHz • • • • • RDC: Resistance of component for DC current. Maximum rated current: measure of current capacity of the component. When the maximum rated current is applied, temperature rise shall not exceed 20°C. Standard tolerance on impedance is ±25%. Other tolerances can be provided upon request. Operating temperature: -40°C to +125°C. 2004 Sep 01 6 Ferroxcube EMI-suppression products Multilayer suppressors Product specifications Multilayer Power Beads MLP SIZE 0603 0805 1206 |Ztyp| at 100 MHz (Ω) RDC MAX. (Ω) I MAX. (mA) 11 ± 25% 0.02 4000 25 ± 25% 0.03 3000 MLP0603-250 40 ± 25% 0.035 3000 MLP0603-400 1806 1812 2004 Sep 01 MLP0603-110 60 ± 25% 0.04 3000 MLP0603-600 120 ± 25% 0.07 1800 MLP0603-121 300 ± 25% 0.14 1500 MLP0603-301 500 ± 25% 0.18 1500 MLP0603-501 600 ± 25% 0.2 1000 MLP0603-601 1000 ± 25% 0.25 800 MLP0603-102 11 ± 25% 0.01 6000 MLP0805-110 17 ± 25% 0.02 5000 MLP0805-170 30 ± 25% 0.02 4000 MLP0805-300 60 ± 25% 0.03 3000 MLP0805-600 80 ± 25% 0.04 3000 MLP0805-800 120 ± 25% 0.04 3000 MLP0805-121 200 ± 25% 0.05 2500 MLP0805-201 300 ± 25% 0.08 2000 MLP0805-301 600 ± 25% 0.1 2000 MLP0805-601 1000 ± 25% 0.12 1500 MLP0805-102 19 ± 25% 0.015 7000 MLP1206-190 32 ± 25% 0.015 4000 MLP1206-320 50 ± 25% 0.02 4000 MLP1206-500 70 ± 25% 0.025 3000 MLP1206-700 80 ± 25% 0.025 3000 MLP1206-800 100 ± 25% 0.03 2500 MLP1206-101 300 ± 25% 0.06 2000 MLP1206-301 600 ± 25% 0.1 1800 MLP1206-601 1000 (1) ± 25% 0.15 1200 MLP1206-102 1200 (1) ± 25% 0.18 1000 MLP1206-122 (1) ± 25% 0.2 800 MLP1206-152 60 ± 25% 0.025 4000 MLP1210-600 90 ± 25% 0.025 3000 MLP1210-900 50 ± 25% 0.02 6000 MLP1806-500 60 ± 25% 0.02 5000 MLP1806-600 80 ± 25% 0.025 4000 MLP1806-800 150 ± 25% 0.1 2000 MLP1806-151 70 ± 25% 0.03 6000 MLP1812-700 120 ± 25% 0.03 4000 MLP1812-121 1500 1210 TYPE NUMBER 7 Ferroxcube EMI-suppression products Multilayer suppressors Product specifications Multilayer Narrow Band MLN SIZE 0603 0805 1206 2004 Sep 01 |Ztyp| at 100 MHz (Ω) RDC MAX. (Ω) I MAX. (mA) TYPE NUMBER 6 ± 25% 0.05 500 MLN0603-060 10 ± 25% 0.07 400 MLN0603-100 40 ± 25% 0.30 300 MLN0603-400 80 ± 25% 0.50 300 MLN0603-800 120 ± 25% 0.40 300 MLN0603-121 240 ± 25% 0.60 200 MLN0603-241 300 ± 25% 0.60 200 MLN0603-301 480 ± 25% 0.70 150 MLN0603-481 600 ± 25% 0.60 100 MLN0603-601 6 ± 25% 0.07 800 MLN0805-060 11 ± 25% 0.10 700 MLN0805-110 26 ± 25% 0.20 600 MLN0805-260 32 ± 25% 0.20 600 MLN0805-320 60 ± 25% 0.30 500 MLN0805-600 75 ± 25% 0.30 500 MLN0805-750 90 ± 25% 0.30 500 MLN0805-900 120 ± 25% 0.40 400 MLN0805-121 150 ± 25% 0.40 400 MLN0805-151 170 ± 25% 0.50 400 MLN0805-171 220 ± 25% 0.50 300 MLN0805-221 300 ± 25% 0.50 300 MLN0805-301 400 ± 25% 0.60 300 MLN0805-401 500 ± 25% 0.70 200 MLN0805-501 600 ± 25% 0.50 200 MLN0805-601 1000 ± 25% 1.0 100 MLN0805-102 1200 ± 25% 0.70 100 MLN0805-122 1500 ± 25% 0.70 100 MLN0805-152 32 ± 25% 0.20 600 MLN1206-320 MLN1206-600 60 ± 25% 0.30 500 80 ± 25% 0.30 500 MLN1206-800 90 ± 25% 0.30 500 MLN1206-900 120 ± 25% 0.40 400 MLN1206-121 150 ± 25% 0.40 400 MLN1206-151 200 ± 25% 0.50 300 MLN1206-201 220 ± 25% 0.30 300 MLN1206-221 350 ± 25% 0.30 300 MLN1206-351 400 ± 25% 0.60 300 MLN1206-401 600 ± 25% 0.80 300 MLN1206-601 1200 ± 25% 1.00 200 MLN1206-122 8 Ferroxcube Multilayer Suppressors EMI-suppression products MOUNTING Soldering profiles Soldering 10 sec max. Preheat 100 sec max. Natural cooling 230oC o 200 C 150oC 20 sec max. 60 sec min. MFW038 Typical values (solid line). Process limits (dotted lines). Fig.1 Reflow soldering. Soldering 10 sec max. Preheat 100 sec max. Natural cooling 250oC 150 oC 60 sec min. MFW037 Typical values (solid line). Process limits (dotted lines). Fig.2 Double wave soldering. 2004 Sep 01 9 Ferroxcube Multilayer Suppressors EMI-suppression products Dimensions of solderlands C B A MFW036 For dimensions see Table 1. Fig.3 Recommended dimensions of solder lands. Table 1 Solder land dimensions for MLS, MLP and MLN types; see Fig.3 FOOTPRINT DIMENSIONS (mm) SIZE A B C 0402 1.2 − 1.4 0.4 0.4 0603 2.4 − 3.4 0.8 0.6 0805 3.0 − 4.0 1.2 1.0 1206 4.2 − 5.2 2.0 1.2 1210 5.5 − 6.5 2.0 1.8 1806 5.5 − 6.5 3.0 1.2 1812 5.5 − 6.5 3.0 2.4 2004 Sep 01 10 Ferroxcube Multilayer Suppressors EMI-suppression products BLISTER TAPE AND REEL DIMENSIONS 4 ± 0.1 W ± 0.2 2 ± 0.05 T ± 0.05 K ± 0.05 1.75 ± 0.1 Carrier tape: Polystyrene Cover tape: Polyethylene F ± 0.05 B ± 0.1 P ± 0.1 160 min. Blank part Chip mounting part Cover tape T ± 0.05 A ± 0.1 Blank 330 min. Leader MFW061 Fig.1 Fig.2 For dimensions see Table 2. Fig.4 Blister tape. Table 2 Dimensions of blister tape for relevant product size code; see Fig.4 PRODUCT SIZE CODE DIMENSION 0402 0603 0805 1206 A 0.65 0.975 1.54 1.94 2.80 1.94 3.64 B 1.15 1.8 2.32 3.54 3.42 4.94 4.94 T 0.7 1.05 1.15 1.29 1.64 1.90 1.80 W 8.0 8.0 8.0 8.0 8.0 12 12 P 2.0 4.0 4.0 4.0 4.0 4.0 8.0 F 3.5 3.5 3.5 3.5 3.5 5.5 5.5 K - - 0.2 0.2 0.2 0.3 0.3 Tape fig. 2 2 1 1 1 1 1 MATERIAL BLISTER TAPE: • Sizes 0402 and 0603: paper • Other sizes: Polystyrene MATERIAL COVER FILM: • Polyethylene 2004 Sep 01 11 1210 1806 1812 Ferroxcube EMI-suppression products D ± 0.5 2 ± 0.5 1.0 21 ± 0.8 13 ± 0.5 B ± 1 C±1 A±2 MFW039 Dimensions in mm. For dimensions see Table 3. Fig.5 Reel. Table 3 Reel dimensions; see Fig.5 PRODUCT SIZE CODE DIMENSION 0402 0603 0805 1206 1210 1806 1812 A 178 178 178 178 178 178 178 B 60 60 60 60 60 60 60 C 10 10 10 10 10 14 14 D 2 2 2 2 2 2 2 0402 0603 0805 1206 1210 1806 1812 10 000 4 000 4 000 3 000 2 500 2 000 1 000 Table 4 Packing quantities PRODUCT SIZE CODE Pcs./reel 2004 Sep 01 12 Ferroxcube EMI-suppression products Multilayer suppressors DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2004 Sep 01 13