VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES • Approved IEC 60384-14 • Specialty: safety certified capacitors • Wet build process • Reliable Noble Metal Electrode (NME) system • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Power supplies • Facsimile and telephone • AC equipment and appliances • Lighting strike and voltage surge protection • EMI and AC line filtering • Isolators ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +125 °C Capacitance Range X1 / Y2 (1): 82 pF to 4.7 nF Capacitance Range X2 (1): 82 pF to 12 nF Voltage Range: 250 VAC Insulating Resistance: at +25 °C 100 000 M min. or 1000 F whichever is less at +125 °C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Voltage Proof Test: X1 / Y2: 1500 VAC (RMS), 60 s ± 1 s X2: 1075 VDC, 60 s ± 1 s Dissipation Factor (DF) (1): 2.5 % maximum at 1.0 VRMS at 1 kHz or per IEC 60384-14 at 1.0 VRMS at 10 kHz Peak Impulse Voltage: X1 / Y2: 5000 V X2: 2500 V Climatic Category According to EN60068-1: 55/125/21 Note (1) Test conditions per IEC 60384-14: Voltage: 1 VRMS Capacitance: C 100 pF at 1 MHz and C > 100 pF at 1 kHz Revision: 09-Sep-14 Document Number: 45020 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (VAC) 2008 2012 X7R (X1 / Y2) X7R (X2) CAPACITANCE MINIMUM MAXIMUM 250 82 pF 1.0 nF 250 150 pF 1.2 nF 2220 250 270 pF 4.7 nF 2008 250 82 pF 2.7 nF 2012 250 150 pF 5.6 nF 2220 250 270 pF 12 nF Notes • Detail ratings see “Selection Chart” • Size 2008 and 2012 are compatible with 1808 and 1812 solderlands and full conform with the IEC-60384-14 requirements for creepage distance ORDERING INFORMATION VJ2008 Y 102 K X U S T CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION AC VOLTAGE RATING MARKING 2008 2012 2220 Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 102 = 1000 pF K = ± 10 % M = ± 20 % X = Ni barrier 100 % tin plated U = 250 VAC S = marked (see Part Marking table below) ### (1) PACKAGING PROCESS CODE X1 = X1 / Y2 X2 = X2 T = 7" reel / plastic tape R = 11 1/4" / 13" reel / plastic tape Notes (1) Process code must be added to control products and requirements • Detail ratings see “Selection Chart” PART MARKING 1ST DIGIT MANUFACTURER MARKING VA 2ND DIGIT DIELECTRIC AND RATING A = X7R, X1 / Y2 V = Vishay VM M = X7R, X2 DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATION (P) PART ORDERING NUMBER LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 2008 VJ2008 0.200 ± 0.010 (5.08 ± 0.25) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 2012 VJ2012 0.200 ± 0.010 (5.08 ± 0.25) 0.126 ± 0.008 (3.20 ± 0.20) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) 2220 VJ2220 0.220 ± 0.008 (5.59 ± 0.20) 0.200 ± 0.010 (5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.030 (0.76) CASE CODE Revision: 09-Sep-14 Document Number: 45020 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE CASE CODE VOLTAGE (VAC) VOLTAGE CODE CAP. CODE 100 220 330 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 VJ2008 (1) 2008 250 U CAP. 10 pF 22 pF 33 pF 47 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF • • • • • • • • • • • • • • X7R (X1 / Y2) VJ2012 (1) 2012 250 U VJ2220 (1) 2220 250 U • • • • • • • • • • • • VJ2008 (1) 2008 250 U • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • X7R (X2) VJ2012 (1) 2012 250 U VJ2220 (1) 2220 250 U • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Notes (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 RoHS-compliant PACKAGING QUANTITIES (1) 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES CASE CODE TAPE SIZE PACKAGING CODE “T” PACKAGING CODE “R” 2008 12 mm 2000 10 000 2012 12 mm 1000 4000 2220 12 mm 1000 4000 Note (1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement” Revision: 09-Sep-14 Document Number: 45020 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon APPROVALS IEC 60384-14 - Safety tests CB test certificates: X1 / Y2-capacitor: DE1-52193 82 pF to 4700 pF 250 VAC X2-capacitor: DE1-52193 82 pF to 12 000 pF 250 VAC DIN EN 60384-14 (VDE 0565 Teil 1-1):2006-04; EN 60384-14:2005-08; IEC 60384-14 (ed.3) X1 / Y2-capacitor: 70001064 82 pF to 4700 pF 250 V~ X2-capacitor: 70001064 82 pF to 12 000 pF 250 V~ CAN/CSA-E60384-14:09 and ANSI/UL 60384-14-2009 STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 09-Sep-14 Document Number: 45020 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000