CX4HGSM AT CRYSTAL 14 MHz to 50 MHz High Shock, Ultra-Miniature, Low Profile Surface Mount AT Quartz Crystal Intended for applications requiring shock survivability up to 100,000 g, Statek’s surface-mount CX4HGSM crystals are high-shock versions of the CX4SM crystals. actual size XX SXX DESCRIPTION glass lid side view ceramic lid PACKAGE DIMENSIONS FEATURES High shock and vibration resistance Designed for surface mount applications using infrared, vapor phase, or epoxy mount techniques. Low profile (less than 1.2 mm) hermetically sealed ceramic package Available with glass or ceramic lid Custom designs available Full military testing available Designed and manufactured in the USA TYPICAL APPLICATIONS Industrial & Communications Down-hole Data Recorder Process Control Environmental Control Engine Control Telemetry Ruggedized Instrumentation MAXIMUM DIM inches mm inches mm A 0.197 5.00 0.210 5.33 B 0.072 1.83 0.085 2.16 C — — D 0.036 0.91 0.046 1.16 E 0.020 0.51 — — F 0.025 0.64 — — see below Automotive Control Military & Aerospace Smart Munitions THICKNESS (DIM C) MAXIMUM Timing Devices (Fuzes) GLASS LID Surveillance Devices Missile Telemetry Ruggedized Communications Aviation Equipment CERAMIC LID inches mm inches mm SM1 0.045 1.14 0.050 1.27 SM2/SM4 0.046 1.17 0.051 1.30 SM3/SM5 0.048 1.22 0.053 1.35 10165 Rev B STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SPECIFICATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Fundamental Frequency 14.7456 MHz 16MHz 20 MHz 32 MHz 40 MHz Motional Resistance R1 (Ω) Motional Capacitance C1 (fF) Quality Factor Q (k) Shunt Capacitance C0 (pF) Frequency Range1 60 1.4 120 0.8 75 1.5 90 0.9 50 1.4 110 0.9 14 MHz to 50 MHz + _ 100 ppm, or tighter as required 10 pF (unless specified otherwise) Drive Level 200 µW MAX Frequency-Temperature Stability2,3 Aging, first year + _ 50 ppm to + _ 100 ppm to + _ 100 ppm to Designation SM1 SM2 + _ 10 ppm (Commercial) SM3 + _ 20 ppm (Industrial) SM4 + SM5 _ 30 ppm (Military) 10 ppm MAX 4 Shock, survival Termination Gold Plated (Lead Free) Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) Max Process Temperature Up to 100,000 g, 0.5 ms, 1/ 2 sine Vibration, survival 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) Storage Temp. Range -40OC to +85OC (Industrial) -55OC to +125OC (Military) -55OC to +125OC Max Process Temperature 260OC for 20 sec 5 30 1.5 90 1.0 TERMINATIONS Calibration Tolerance Load Capacitance 2 30 2.5 70 1.1 260OC for 20 sec EQUIVALENT CIRCUIT 1. Other frequencies available. Contact factory. 2. Other tolerances available. Contact factory. 3. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 4. Lower aging available at low shock levels. R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance SUGGESTED LAND PATTERN 5. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. PACKAGING OPTIONS • Tray Pack • Tape and Reel Per EIA 481 (see Tape and Reel data sheet 10109) HOW TO ORDER CX4HGSM AT CRYSTALS CX4 S HG1 C SM1 – “S” if special or custom design. Blank if standard Shock Level HG1 = 10,000 g HG2 = 20,000 g HG3 = 30,000 g HG4 = 50,000 g HG5 = 75,000 g HG6 = 100,000 g C = Ceramic Lid Blank = Glass Lid 32.0M Frequency M = MHz Termination SM1 = Gold Plated SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) , 100 / Calibration Tolerance @25OC (in ppm) 100 / — Frequency Stability over Temp. Range / — / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified OR — / 200 Total Frequency Tolerance (in ppm) / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified 10165 Rev B STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com