TAPE AND REEL (CRYSTAL) Surface Mount Miniature Quartz Crystal Reference: EIA-481 Notes: 1. Reel sketch is for reference only. 2. The center hole (hub hole) diameter is per EIA-481 standard 13 mm size. Carrier tape material: 3000 Black Conductive Polycarbonate REEL SELECTION Unless specified otherwise, the following reel sizes and orientation will be used for the quantities listed. CRYSTAL TYPE MAX QUANTITIES PER REEL 180 mm (7 in.) 330 mm (13 in.) 1000 2000 2000 3000 3000 2000 2000 3000 3000 3000 4000 8000 8000 12000 12000 8000 8000 12000 12000 12000 CX1 SM CX2 SM CX3 SM CX4 SM CX4 SM (VP) CX6 SM CX8 SM CX9 SM CX11 SM CX14 SM PART TO PART INDEXING P1 AND A0 & B0 DIMENSIONS Dimensions are in millimeters CX1 CX2 CX3 CX4 CX4 (VP) CX6 CX8 CX9 CX11 CX14 P1 A0 B0 Tape Width 8.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 2.8 2.8 2.1 2.1 2.8 2.8 1.8 1.9 2.9 8.4 7.1 7.1 5.5 5.5 7.1 7.1 4.5 3.6 3.6 16 16 16 16 16 16 16 16 12 12 ORIENTATION (Unless Specified Otherwise) Random Single Pad Towards Sprocket Holes Random Random Dual Pads Toward Sprocket Holes Random Random Random Random Random CRYSTAL ORIENTATION IN TAPE CAVITY Top View CX2, CX3, CX4, CX6, CX8, CX9, & CX11 Marking CX14 Marking (When Specified) (When Specified) "XXXX" indicates a 4-digit datecode "XX" indicates a 2-digit datecode Bottom View For 16 mm tape width, W = 16, F = 7.5 For 12 mm tape width, W = 12, F = 5.5 STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 10109 - Rev F TAPE AND REEL (OSCILLATOR) Surface Mount Miniature Quartz Crystal Oscillator Reference: EIA-481 Notes: 1. Reel sketch is for reference only. 2. The center hole (hub hole) diameter is per EIA-481 standard 13 mm size. OSCILLATOR ORIENTATION IN TAPE CAVITY - See pin 1 locator (!) REEL SELECTION Unless specified otherwise, the following reel sizes will be used for the quantities listed. OSCILLATOR TYPE CXOM CXO3M CXO LSC LSM HGXO CXOX CXOQ MAX QUANTITIES PER REEL 180 mm (7 in.) 800 800 500 500 500 800 3000 3000 330 mm (13 in.) 3000 3000 2000 2000 2000 3000 12000 PART TO PART INDEXING P1 AND A0 & B0 DIMENSIONS Dimensions are in millimeters. CXOM CXO3M CXO LSC LSM HGXO CXOX CXOQ Top View HGXO P1 A0 B0 Tape Width 8.0 8.0 16.0 16.0 16.0 8.0 4.0 4.0 5.4 5.4 10.6 10.6 10.6 5.6 2.9 2.16 6.9 6.9 5.1 5.1 5.1 7.7 3.6 2.67 16 16 16 16 16 16 12 8 LSC CXOQ For 16 mm tape width, W = 16, F = 7.5 For 12 mm tape width, W = 12, F = 5.5 For 8 mm tape width, W = 8, F = 3.5 STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com 10109 - Rev F