en3® right angle pc board mount 2-18 contact

EN3® RIGHT ANGLE PC BOARD MOUNT 2-18 CONTAC T
NEW PRODUCT BULLETIN 597
Please visit www.switchcraft.com for the most up-to-date product specifications. Made in USA.
EN3® RIGHT ANGLE PC BOARD MOUNT 2-18 CONTAC T
NEW PRODUCT BULLETIN 597
FEATURES & BENEFITS
APPLICATIONS
• Sealed to IP68 NEMA 250 (6P)
• Any sealed data transmission
• Military or industrial
GPS location devices
• Instrumentation
• Medical data carts
• Marine Applications
• Transportation
• General industrial
electronic applications
• O-ring free design
• Easily mounts to PC boards
• Narrow or wide versions to
fit your applications
• Gold plated contacts standard
Please visit www.switchcraft.com for the most up-to-date product specifications. Made in USA.
EN3® RIGHT ANGLE PC BOARD MOUNT 2-18 CONTAC T
NEW PRODUCT BULLETIN 597
Mechanical Specifications
Vibration: Life: Hex Nut Torque:
Specifications
Mil-Std 202G Method 201A
600 insertion/withdrawal cycles minimum
8-10 in/lb tightening torque
Electrical Specifications
Dielectric Withstanding Voltage: Tested at 500 VAC
Insulation Resistance: 100 MΩ minimum at 77˚F
Contact Resistance (2-8 #20 contact): 15 mΩ maximum initial
30 mΩ maximum after environmental Contact Resistance (9-18 #26 contact): 30 mΩ maximum initial
50 mΩ maximum after environmental
Current Rating: 2.0 A (9-18 #26 contact)
4.0 A (5-8 #20 contact)
5.0 A (2-4 #20 contact)
Environmental Specifications
Temperature Rating: Moisture Resistance: Insulation Resistance: Thermal Shock: Salt Spray:
-40˚C to +65˚C (-40˚F to +149˚F)
Mil-Std 202G Method 106G
Mil-Std 202G Method 302
Mil-Std 202G Method 107G
Mil-Std 202G Method 101E
Material Specifications
Panel Connector Shell, Locking Disk: Connector Shell Interior: Contacts: PCB: Header Insulator:
Thermoplastic, UL94V-0
Thermoplastic Elastomer, UL94HB
Copper Alloy, Gold over Nickel Plate
FR-4
Thermoplastic, UL94V-0
Product Ratings:
IEC 60529 IP16/IP18. IEC 60529 IP66. IEC 60529 IP68 24 hours at 2 meters of water. NEMA 250 6P 24 hours at 2 meters of water. CFR 46 Part 110.20
EN3
P
RAPC
Connector Type:
P - Panel
# of Contacts:
2 - 8 #20
9 - 18 #26
Gender:
M - Male
F - Female
PCB Style:
BN - Narrow PCB
BW - Wide PCB
EN3 Style:
RAPC - Right Angle PC
(Note: 7 & 8 Pin not available in female)
Notes:Please visit www.switchcraft.com for the most up-to-date product specifications. Made in USA.
7 and 8 pin not available in female Panel connector
EN3® RIGHT ANGLE PC BOARD MOUNT 2-18 CONTAC T
NEW PRODUCT BULLETIN 597
EN3 2-8 PIN RIGHT-ANGLE NARROW PCB PANEL CONNECTOR
0.610
15.5
0.582
14.8
RECOMMENDED
PANEL CUT-OUT
0.188 MAX PANEL
THICKNESS
MOUNTING NUT
8-10 INCH-LBS
MAX TORQUE
EN3 2-8 PIN RIGHT-ANGLE WIDE PCB PANEL CONNECTOR
EN3 9-18 PIN RIGHT-ANGLE NARROW PCB PANEL CONNECTOR
SEE EN3 9-18 PIN LOCATIONS
EN3 9-18 PIN RIGHT-ANGLE WIDE PCB PANEL CONNECTOR
EN3 9-18 PIN LOCATIONS
FRONT VIEW OF CONNECTOR
(MATING SIDE)
SEE EN3 9-18 PIN LOCATIONS
NUMBERS SHOWN FOR REFERENCE.
THEY DO NOT APPEAR ON
ACTUAL PART
All dimensions are for reference only.
Please visit www.switchcraft.com for the most up-to-date product specifications. Made in USA.