MOMENTARY SEALED BUTTON SWITCH NPB | 606 5555 N ELSTON AVE | CHICAGO, IL 60630 | P: 773.792.2700 | F: 773.792.2129 | WWW.SWITCHCRAFT.COM MOMENTARY SEALED BUTTON SWITCH NPB | 606 FEATURES & BENEFITS • Rated for up to IP68 NEMA 250 • Rated for 250mA, 30W max, AC non-inductive load • 913S can be wired for 1-A, 1-B, or 1-C (break before make) • 913DS can be wired for 1-A, 1-B, or 1-D (make before break) • RoHS Compliant APPLICATIONS • Communications equipment • Medical Equipment • Instrumentation PLEASE VISIT WWW.SWITCHCRAFT.COM FOR THE MOST UP-TO-DATE PRODUCT SPECIFICATIONS. MADE IN USA MOMENTARY SEALED BUTTON SWITCH NPB | 606 SEALED BUTTON SWITCH SIDE VIEW REAR VIEW NOTES: 1. MOUNTING HOLE 0.615+0.010/-0.000 [ 16.00+0.25/-0.00] 2. MAX PANEL THICKNESS: <0.120 [3.00] 3. HARDWARE SHIPPED UNASSEMBLED 4. THIS PART IS RoHS COMPLIANT UNITS ARE LISTED IN INCHES [mm]. ALL DIMENSIONS ARE REFERENCE ONLY. PLEASE VISIT WWW.SWITCHCRAFT.COM FOR THE MOST UP-TO-DATE PRODUCT SPECIFICATIONS. MADE IN USA MOMENTARY SEALED BUTTON SWITCH NPB | 606 SPECIFICATIONS MECHANICAL SPECIFICATIONS Life: Conductor Sizes: Operating Forces: 20,000 actuation cycles with 48VDC, 0.25amps (50 mΩ max) 20,000 actuation cycles with 125VAC, 0.25amps (50 mΩ max) 16-26 AWG Actuation Force: 2lb. minimum Button Travel: 0.125” ELECTRICAL SPECIFICATIONS Voltage Rating: Current Rating: Insulation Resistance: Contact Resistance: Dielectric Withstanding Voltage: Capacitance: 48 VDC 125 VAC RMS 0.25amps with 16-26 AWG wiring 1000 MΩ minimum 20 mΩ maximum initial 500 VAC (RMS) < 1 pF between contacts, typical < 1 pF between contacts and housing, typical ENVIRONMENTAL SPECIFICATIONS Operating Temperature: Storage Temperature: Moisture Resistance: Thermal Shock: Salt Atmosphere (Corrosion): Weathertight Ratings: -20C to +70C -55C to +85C Mil-Std 202G Method 106G Mil-Std 202G Method 107G Mil-Std 202G Method 101E IP68, NEMA 250 Copper Alloy, Nickel Plated Thermoplastic, Black Thermoplastic Rubber, Black Rigid Plastic Integral Contacts, Plated Copper Alloy, Silver Plated Copper Alloy, Nickel Plated Steel, Nickel Plated MATERIAL SPECIFICATIONS Body and Trim: Pushbutton: Button Seal: Insulators: Springs: Solder Terminals: Mounting Nut: Mounting Washer: PLEASE VISIT WWW.SWITCHCRAFT.COM FOR THE MOST UP-TO-DATE PRODUCT SPECIFICATIONS. MADE IN USA