New Product Bulletin 583 Switchcraft ® Sealed Power Plugs and Jacks IP68/ NEMA 250 (6P) Sealed Power Plug and Jack Applications: Outdoor power supplies where a weather resistant connection is needed ● Medical equipment where the power plug would need to be water proof ● Lighting connections where a rugged harsh environment connector would provide the most reliable sealed connection ● Key Features: IP rating of IP68/ NEMA 250 (6P), for properly mated Switchcraft sealed jack and plug, makes the device perfect for harsh environments ● Available in multiple pin diameters ● Automatic switch over from AC to DC permitted by sleeve shunt spring ● Optional IP rated cap (JCAP) protects Jack when not in use ● Up to 5A current rating (carry), at 65˚C, up to 30 VDC ● Overmold options available ● Color coded plug finger ● Switchcraft® Harsh Environment Connectivity Solutions switchcraft.com SAMade in Made In USAU 5555 N. Elston, Chicago, IL 60630 773-792-2700 - [email protected] New Product Bulletin 583 Switchcraft ® Sealed Power Plugs and Jacks Switchcraft® Harsh Environment Connectivity Solutions switchcraft.com SAMade in Made In USAU 2 5555 N. Elston, Chicago, IL 60630 773-792-2700 - [email protected] New Product Bulletin 583 Switchcraft ® Sealed Power Plugs and Jacks Switchcraft® Harsh Environment Connectivity Solutions switchcraft.com SAMade in Made In USAU 3 5555 N. Elston, Chicago, IL 60630 773-792-2700 - [email protected] Sealed Power Plugs and Jacks Power Jack - Specifications Power Plug - Specifications Features: - IP66, IP67, IP68 / NEMA 250 (6P) when mated - Automatic switch over from AC to DC permitted by sleeve shunt spring - Split center pin shaped to hold mating plug firmly - Right Angle versions offer “kinked” PC terminals for board retention - Optional IP rated cap (JCAP) protects jack when not in use - Operating temperature range is -20°C to +65°C Features: - IP66, IP67, IP68 / NEMA 250 (6P) when mated - Hollow center pin available in 3 pin diameters (2.5mm, 2.1mm, 2.0mm) - Locking ring provides security in critical applications - Sleeve terminal serves as cord clamp - Handle/Boot with cable strain relief - Operating temperature range is -20°C to +65°C Specifications: Materials: Housing: Rigid thermoplastic Bushing: Plated copper alloy, with assembled & lubricated o-ring Terminals: Plated copper alloy Insulators: Rigid Thermoplastic Hardware: Supplied with one nickel plated copper alloy hex nut (P1489), one nickel plated steel flat washer (P3031) and one o-ring for sealing jack to panel Plug Sleeve and Pin: Plated copper alloy Lock Ring: Plated copper alloy Lock Ring Thread Size: 7/16-32 UN2B thread Finger Insulator: Rigid thermoplastic Insulating Washer: Rigid thermoplastic Sleeve Terminal: Plated copper alloy, electro-tinned Handle: Rigid thermoplastic overmolded with thermoplastic elastomer Handle Thread Size: 5/16-24 UNF 2A Electrical: Current (carry) 5A at 65˚C Electrical: Current Rating (carry): 5A, up to 30V DC at 65˚C Contact Resistance: 0.01 Ohms max (initial), 0.02 Ohms (after humidity, durability exposure), 0.10 Ohms max. (after salt spray) Insulation Resistance: 10,000 Mohms min. (initial), 1,000 Mohms (after humidity, durability exposure) Dielectric Withstanding Voltage: 500VAC max. Overmold Option Seal Cap - Specifications Features: - IP66, IP67, IP68 / NEMA 250 (6P) when mated Material: Thermoplastic Elastomer Switchcraft® Harsh Environment Connectivity Solutions switchcraft.com SAMade in Made In USAU 4 5555 N. Elston, Chicago, IL 60630 773-792-2700 - [email protected] New Product Bulletin 583 Switchcraft ®