Fuse Insertion Instructions for DPoE Power Chassis Part Numbers: DPOEPWRCU INSTALLATION INSTRUCTIONS © Panduit Corp. 2009 To install the GMT style fuse in the fuse holder of the DPoE Power Chassis, hold the fuse vertically (as shown in Figure 1) with the contact and alarm spring on the top. PN385B Slide the fuse into the fuse holder in the direction shown in Figure 2. NOTE: Significant pressure may be required to seat the fuse. CONTACT AND ALARM SPRING CONTACT AND ALARM SPRING 0.688 MAX. 0.688 MAX. 0.585 0.585 0.780 0.780 Figure 1 DPOEPWRCU Fuse Holder INSERT Figure 2 For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2 INSTALLATION INSTRUCTIONS PN385B INSTALLED RECTIFIER CAPACITY for NOMINAL FUSE SIZE PER DPOE DEVICE DPOE DEVICES DEPLOYED DPOE DEVICES DEPLOYED QUANTITY DEVICE 1 DPOE8S2XG (8 Port PoE+) 1 DPOE24U1XG (24 Port) 1 DPOE24U1XG (24 Port) 2 or more DPoE Devices Deployed QUANTITY DEVICE 1 DPOEPWRR500 (500 W) 1 DPOEPWRR500 (500 W) 1 DPOEPWRR1250 (1250W) 1 or more DPOEPWRR1250 (1250W) FUSE 5.0 A 5.0 A 7.5 A 7.5 A NOTE: Maximum fuse for DPOEPWRR500 500W recifier is 5.0A PANDUIT Part # DPOEPWRF5 DPOEPWRF7.5 FUSE SIZE 5.0A 7.5A For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 2 of 2 CATALOG SYMBOL GMT-5A GMT-7.5A COLOR CODE Green Black/White E-mail: [email protected] Fax: (708) 444-6993