Preliminary Datasheet RD74HC04A R07DS0045EJ0100 Rev.1.00 Jul 20, 2010 Hex Inverters Features High Speed Operation: tpd = 7.5 ns typ (CL = 50 pF) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 1 A max (Ta = 25C) Ordering Information Part Name Package Code (Previous Code) Package Type Package Abbreviation Taping Abbreviation (Quantity) Surface Treatment RD74HC04APT0 DILP-14 pin PRDP0014AB-B (DP-14AV) P — 0 (Ni/Pd/Au) RD74HC04AFPH0 SOP-14 pin (JEITA) PRSP0014DF-B (FP-14DAV) FP H (2,000 pcs/reel) 0 (Ni/Pd/Au) RD74HC04ARPH0 SOP-14 pin (JEDEC) PRSP0014DE-A (FP-14DNV) RP H (2,500 pcs/reel) 0 (Ni/Pd/Au) Note: Please consult the sales office for the above package availability. Function Table Input A L H H: L: Output Y H L High level Low level Pin Arrangement 1A 1 14 VCC 1Y 2 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y (Top view) R07DS0045EJ0100 Rev.1.00 Jul 20, 2010 Page 1 of 5 RD74HC04A Preliminary Absolute Maximum Ratings Item Supply voltage range Input / Output voltage Input / Output diode current Output current VCC, GND current Power dissipation Symbol VCC Vin, Vout IIK, IOK IO ICC or IGND PT Storage temperature Note: Ratings –0.5 to 7.0 –0.5 to VCC +0.5 20 25 50 1185 785 500 –65 to +150 Tstg Unit V V mA mA mA mW mW mW C Conditions DIP SOP TSSOP The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Supply voltage Input / Output voltage Operating temperature Symbol VCC VIN, VOUT Ta Input rise / fall time*1 Ratings 2 to 6 0 to VCC –40 to 85 0 to 1000 0 to 500 tr, tf Unit V V C ns 0 to 400 Note: Conditions VCC = 2.0 V VCC = 4.5 V VCC = 6.0 V 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. Electrical Characteristics Item Input voltage Symbol VCC (V) VIH VIL Output voltage VOH VOL Input current Iin Quiescent supply current ICC R07DS0045EJ0100 Rev.1.00 Jul 20, 2010 Ta = 25C Min Typ Max Ta = –40 to+85C Min Max 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 1.5 3.15 4.2 — — — 1.9 4.4 5.9 — — — — — — 2.0 4.5 6.0 — — — 0.5 1.35 1.8 — — — 1.5 3.15 4.2 — — — 1.9 4.4 5.9 — — — 0.5 1.35 1.8 — — — 4.5 6.0 4.18 5.68 — — — — 4.13 5.63 — — 2.0 4.5 6.0 4.5 6.0 6.0 6.0 — — — — — — — 0.0 0.0 0.0 — — — — 0.1 0.1 0.1 0.26 0.26 0.1 1.0 — — — — — — — 0.1 0.1 0.1 0.33 0.33 1.0 10 Unit Test Conditions V V V Vin = VIH or VIL IOH = –20 A IOH = –4 mA IOH = –5.2 mA V Vin = VIH or VIL IOL = 20 A A A IOL = 4 mA IOL = 5.2 mA Vin = VCC or GND Vin = VCC or GND, Iout = 0 A Page 2 of 5 RD74HC04A Preliminary Switching Characteristics (CL = 50 pF, Input tr = tf = 6 ns) Item Propagation delay time Symbol VCC (V) tPLH tPHL Output rise time tTLH Output fall time tTHL Input capacitance Cin 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 — Ta = 25C Ta = –40 to +85C Min Typ Max Min Max — — — — — — — — — — — — — — 7 — — 8 — — 5 — — 5 — 5 90 18 15 90 18 15 75 15 13 75 15 13 10 — — — — — — — — — — — — — 115 23 20 115 23 20 95 19 16 95 19 16 10 Unit Test Conditions ns ns ns ns pF Test Circuit Measurement point CL* Note: CL includes the probe and fig capacitance. Waveforms • Waveform − 1 tr tf VCC 90% 50% 90% 50% Input 10% 10% t PHL 0V t PLH VOH Output 50% 50% VOL t THL t TLH Notes: 1. Input waveform: PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 6 ns, tf ≤ 6 ns 2. The output are measured one at a time with one transition per measurement. R07DS0045EJ0100 Rev.1.00 Jul 20, 2010 Page 3 of 5 RD74HC04A Preliminary Package Dimensions JEITA Package Code P-DIP14-6.3x19.2-2.54 RENESAS Code PRDP0014AB-B Previous Code DP-14AV MASS[Typ.] 0.97g D 8 E 14 1 7 b3 A Z A1 Reference Symbol L e1 D E A A1 bp b3 c θ e Z L θ bp e c e1 ( Ni/Pd/Au plating ) JEITA Package Code P-SOP14-5.5x10.06-1.27 RENESAS Code PRSP0014DF-B *1 Previous Code FP-14DAV D Min Nom Max 7.62 19.2 20.32 6.3 7.4 5.06 0.51 0.40 0.48 0.56 1.30 0.19 0.25 0.31 0° 15° 2.29 2.54 2.79 2.39 2.54 MASS[Typ.] 0.23g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F 14 Dimension in Millimeters 8 c HE *2 E bp Index mark Terminal cross section (Ni/Pd/Au plating) Z Reference Symbol 7 1 *3 e bp x M L1 A1 θ A S L y S Detail F R07DS0045EJ0100 Rev.1.00 Jul 20, 2010 D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Dimension in Millimeters Min Nom Max 10.06 10.5 5.50 0.00 0.10 0.34 0.40 0.20 2.20 0.46 0.15 0.20 0.25 0° 7.50 0.50 7.80 1.27 0.70 1.15 8° 8.00 0.12 0.15 1.42 0.90 Page 4 of 5 RD74HC04A JEITA Package Code P-SOP14-3.95x8.65-1.27 Preliminary RENESAS Code PRSP0014DE-A *1 Previous Code FP-14DNV MASS[Typ.] 0.13g NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. F D 14 8 c *2 Index mark HE E bp Terminal cross section Reference Symbol (Ni/Pd/Au plating) 1 Z 7 *3 e bp x M A L1 A1 θ S y S R07DS0045EJ0100 Rev.1.00 Jul 20, 2010 L Detail F D E A2 A1 A bp b1 c c1 θ HE e x y Z L L1 Dimension in Millimeters Min Nom Max 8.65 9.05 3.95 0.10 0.14 0.34 0.40 0.25 1.75 0.46 0.15 0.20 0.25 0° 5.80 0.40 6.10 1.27 8° 6.20 0.25 0.15 0.635 0.60 1.27 1.08 Page 5 of 5 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 © 2010 Renesas Electronics Corporation. All rights reserved. Colophon 1.0