Aluminum Electrolytic Capacitors RGA RGA Series Features ‧105℃, 2,000 hours assured ‧105℃ standard series for general purposes ‧RoHS Compliance ‧If there is any requirement on ESR, it’s suggested to use low ESR series instead of RGA. Please consult us for any inquiry. Sleeve & Marking Color: Black & White Specifications Performance Items Category Temperature Range 6.3~400V -40℃ ~ +105℃ 450V -25℃ ~ +105℃ ±20% Capacitance Tolerance Rated voltage Time Leakage Current (at 20℃) (at 120Hz, 20℃) ≦100V ＞100V after 2 minutes after 5 minutes CV ＞ 1,000 I = 0.01CV or 3 (μA) CV ≦ 1,000 Leakage Current whichever is greater I = 0.03CV + 15(μA) I = 0.02CV + 25(μA) Where, C = rated capacitance in μF V = rated DC working voltage in V Rated Voltage Tanδ (max) Tanδ (at 120 Hz, 20℃) 6.3 10 16 25 35 50 63 100 160 200 250 350 400 0.23 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 When the capacitance exceeds 1,000μF, 0.02 shall be added every 1,000μF increase. Rated Voltage Z(-25℃) Impedance /Z(+20℃) Ratio Z(-40℃) /Z(+20℃) Low Temperature Characteristics (at 120Hz) 450 0.25 Impedance ratio shall not exceed the values given in the table below. 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 φD＜16 4 3 3 2 2 2 2 2 3 6 8 12 14 16 φD≧16 6 4 4 3 3 3 3 3 φD＜16 8 6 6 4 4 3 3 3 4 8 10 16 18 φD≧16 12 10 8 8 8 8 6 6 Test Time 2,000 Hrs Capacitance Change Within ±20% of initial value Tanδ Less than 200% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage applied with rated ripple current for 2,000 hours at 105℃. Endurance Test Time 1,000 Hrs Capacitance Change With in ±20% of initial value Tanδ Less than 200% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V (Refer to JIS C 5101-4 4.1). Shelf Life Test Freq. (Hz) Ripple Current & Frequency Multipliers Cap. (μF) 60 (50) 120 500 1k 10k up 0.70 0.75 0.80 1.00 1.00 1.00 1.30 1.20 1.10 1.40 1.30 1.12 1.50 1.35 1.15 Under 100 100 ＜ C ≦ 1,000 1,000 up above Diagram of Dimensions L+α max Lead Spacing and Diameter φD+βmax φd Vent≧6.3φ 5 6.3 8 10 12.5 16 18 22 25 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 12.5 15 min P±0.5 φd Sleeve 4 min α 0.5 0.6 β 80 15 min 4 min P±0.5 Sleeve φD+βmax φd L+α max 0.8 L<20: 1.5, L≧20: 2.0 The case size of 12.5×16, 16×16, 16×20, 18×16, 18×20 and 18×25 are suitable for below diagram: Vent Unit: mm φD All product specifications in the catalog are subject to change without notice. (CAT. 2014E1) 0.5 1.0 2.0 Aluminum Electrolytic Capacitors RGA Dimension: φD × L(mm) Ripple Current: mA/rms at 120 Hz, 105℃ Dimension & Permissible Ripple Current V. DC 6.3V (0J) Contents φD×L 16V (1C) 5×11 mA 3.3 3R3 30 5×11 30 5×11 4.7 31 4R7 5×11 33 5×11 36 10 100 5×11 50 22 220 5×11 78 6.3×11 86 33 330 470 100 130 141 54 93 99 130 47 6.3×11 6.3×11 8×11.5 6.3×11 6.3×11 8×11.5 8×11.5 10×12.5 165 10×20 12.5×16 12.5×25 16×16 265 290 440 420 220 221 5×11 5×11 682 10,000 103 15,000 153 22,000 223 33,000 333 V. DC μF 1 235 190 8×11.5 236 8×11.5 270 10×12.5 300 10×16 335 310 335 10×20 12.5×16 12.5×20 16×16 510 460 640 665 16×25 620 16×31.5 18×25 715 745 16×25 930 18×40 1,275 18×40 2,280 25×45 2,400 22×40 2,510 25×40 3,000 8×11.5 310 10×12.5 8×11.5 380 10×12.5 460 10×16 560 10×20 12.5×16 10×16 690 10×20 760 12.5×16 780 12.5×25 222 6,800 10×12.5 290 2,200 120 188 8×11.5 102 90 6.3×11 8×11.5 230 1,000 5×11 90 150 270 6.3×11 75 5×11 6.3×11 8×11.5 471 472 6.3×11 5×11 142 200 470 4,700 175 97 10×20 12.5×16 12.5×20 16×16 12.5×25 16×20 10×12.5 350 10×16 410 10×20 530 12.5×16 425 680 12.5×20 810 12.5×25 950 590 16×16 720 16×20 830 16×25 1,260 16×35.5 1,470 1,110 18×20 1,110 18×31.5 1,520 1,440 16×31.5 1,420 18×35.5 1,770 1,220 18×25 1,570 1,650 18×35.5 1,900 22×40 2,340 1,550 2,000 18×40 2,250 25×40 2,530 2,160 2,720 2,410 380 10×16 460 840 12.5×20 1,100 12.5×25 1,170 16×25 850 16×16 940 16×16 950 18×20 1,090 12.5×25 1,260 16×20 1,185 16×31.5 1,010 16×16 1,060 18×16 1,290 18×25 1,460 16×31.5 1,930 16×40 16×20 1,270 1,190 18×20 1,585 18×35.5 16×31.5 2,220 16×35.5 2,210 22×40 16×20 1,340 18×25 1,800 18×31.5 2,330 18×45 16×31.5 2,365 18×31.5 2,620 18×40 2,950 25×40 3,200 18×25 2,290 16×35.5 2,590 16×40 2,800 18×40 3,230 22×40 3,460 18×35.5 2,930 18×45 3,080 22×40 4,090 25×45 4,500 160V (2C) mA Contents φD×L 200V (2D) φD×L 250V (2E) mA 350V (2V) mA φD×L φD×L 400V (2G) mA 010 450V (2W) φD×L mA φD×L mA 6.3×11 21 8×11.5 27 2.2 2R2 6.3×11 30 6.3×11 35 6.3×11 35 8×11.5 39 8×11.5 39 3.3 3R3 6.3×11 39 6.3×11 40 4.7 4R7 6.3×11 43 8×11.5 45 10 100 8×11.5 65 8×11.5 65 10×12.5 92 8×11.5 8×11.5 10×12.5 10×16 43 45 55 95 8×11.5 8×11.5 10×12.5 10×16 45 50 55 95 8×11.5 8×11.5 10×12.5 10×20 45 50 55 105 22 220 10×12.5 110 10×16 140 10×16 140 10×16 150 10×20 170 12.5×16 175 220 215 205 160 330 12.5×20 12.5×25 16×16 12.5×20 33 16×20 225 47 470 10×20 195 12.5×16 215 12.5×20 16×16 230 245 16×20 255 16×25 295 68 680 12.5×20 275 16×20 320 355 540 18×40 560 151 16×25 470 18×20 510 425 415 550 535 18×35.5 150 16×25 18×20 16×31.5 18×25 360 370 460 430 360 375 12.5×25 18×25 16×31.5 18×31.5 16×35.5 18×25 16×31.5 101 265 290 365 360 160 225 220 280 285 400 420 100 12.5×20 16×16 16×20 18×16 12.5×20 16×20 18×16 16×25 18×20 16×35.5 18×31.5 22×40 730 22×40 770 22×45 930 220 221 16×31.5 660 18×31.5 750 18×35.5 760 330 331 18×35.5 820 18×40 965 22×40 1,140 470 330 22×40 1,130 22×40 1,130 25×40 1,325 18×40 600 25×40 22×45 25×45 865 850 1,070 Part Numbering System RGA series 470μF ±20% 6.3V φD×L 6.3×11 6.3×11 331 332 6.3×11 110 8×11.5 10×12.5 330 3,300 140 5×11 φD×L mA 100V (2A) 5×11 φD×L mA 63V (1J) 20 φD×L mA 50V (1H) 2R2 101 mA 35V (1V) φD×L φD×L mA 25V (1E) mA 100 mA 10V (1A) φD×L μF 2.2 Bulk Package Gas Type 6.3φ×11L RGA 471 M 0J BK - 0611 Series Capacitance Capacitance Tolerance Rated Voltage Lead Configuration & Package Rubber Type Case Size Pb-free and PET coating case Lead Wire and Coating Type Note: For more details, please refer to “Part Numbering System (Radial Type)” on page 10. All product specifications in the catalog are subject to change without notice. (CAT. 2014E1) 81