GXH - United Chemi-Con

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, 135℃
GXH
Series
・For automobile modules and other high temperature applications
・Endurance with ripple current : 1,500 to 2,000 hours at 135℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
GXE
P189
Higher temperature
GXH
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range -40 to +135℃
Rated Voltage Range 10 to 50Vdc
(at 20℃, 120Hz)
Capacitance Tolerance ±20% (M)
I=0.03CV or 4µA, whichever is greater.
Leakage Current
(at 20℃, 1 minute)
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (Vdc)
Dissipation Factor
10V 16V 25V 35V 50V
(tanδ)
tanδ(Max.)
0.20 0.16 0.14 0.12 0.10
(at 20℃, 120Hz)
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
Rated voltage (Vdc)
Low Temperature
10V 16V 25V 35V 50V
Characteristics
Z(-25℃)/Z(+20℃)
2
2
2
2
3
(Max. Impedance Ratio)
(at 120Hz)
Z(-40℃)/Z(+20℃)
4
4
4
4
6
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
Endurance
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified time at 135℃.
Time
φ10 : 1,500hours φ12.5 &φ16 : 2,000hours
Capacitance change
≦±30% of the initial value
≦300% of the initial specified value
D.F. (tanδ)
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 135℃ without
Shelf Life
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
◆DIMENSIONS [mm]
φD'
φd
Coated Case
F±0.5
Code : E
F±0.5
●Terminal
15min.
L'
Vent
4min.
(φ12.5 & φ16)
(φ10)
φD
φd
F
φD'
L'
10 12.5 16
0.6 0.6 0.8
5.0 5.0 7.5
φD+0.5max.
L+2.0max.
Gas escape end seal
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15 16
17
18
E GXH AAA E AA AAA M AAA H
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 330µF:331, 1,000µF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 10V:100,35V:350)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
196
CAT. No. E1001N
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, 135℃
GXHSeries
◆STANDARD RATINGS
WV
(Vdc)
10
16
25
35
50
Cap
(µF)
φD× L(mm)
Case size
Impedance
(Ωmax/20℃, 100kHz)
330
470
1,000
2,200
3,300
4,700
220
330
470
1,000
2,200
3,300
220
330
470
1,000
2,200
100
220
330
470
1,000
100
220
330
470
1,000
10 ×12.5
10 ×12.5
10 × 20
12.5 × 25
16× 25
16×31.5
10 ×12.5
10 ×12.5
10 × 16
12.5 × 20
16× 25
16 ×31.5
10 ×12.5
10 ×16
10× 20
12.5 × 25
16× 31.5
10× 12.5
10 × 16
10× 20
12.5 × 20
16× 25
10 × 12.5
10 × 20
12.5 × 20
12.5 × 25
16 × 31.5
0.15
0.15
0.075
0.040
0.031
0.025
0.15
0.15
0.094
0.058
0.031
0.025
0.15
0.094
0.075
0.040
0.025
0.15
0.094
0.075
0.058
0.031
0.20
0.098
0.081
0.059
0.032
Rated ripple current
(mArms/135℃, 100kHz)
620
620
950
1,350
1,620
1,860
620
620
790
1,080
1,620
1,860
620
790
950
1,350
1,860
620
790
950
1,080
1,620
520
880
990
1,150
1,590
Part No.
EGXH100E□□331MJC5H
EGXH100E□□471MJC5H
EGXH100E□□102MJ20H
EGXH100E□□222MK25H
EGXH100E□□332ML25H
EGXH100E□□472MLN3H
EGXH160E□□221MJC5H
EGXH160E□□331MJC5H
EGXH160E□□471MJ16H
EGXH160E□□102MK20H
EGXH160E□□222ML25H
EGXH160E□□332MLN3H
EGXH250E□□221MJC5H
EGXH250E□□331MJ16H
EGXH250E□□471MJ20H
EGXH250E□□102MK25H
EGXH250E□□222MLN3H
EGXH350E□□101MJC5H
EGXH350E□□221MJ16H
EGXH350E□□331MJ20H
EGXH350E□□471MK20H
EGXH350E□□102ML25H
EGXH500E□□101MJC5H
EGXH500E□□221MJ20H
EGXH500E□□331MK20H
EGXH500E□□471MK25H
EGXH500E□□102MLN3H
□□ : Enter the appropriate lead forming or taping code.
◆RATED RIPPLE CURRENT MULTIPLIERS
●Frequency
Capacitance (µF)
Multipliers
Frequency (Hz)
100
220 to 470
1,000
2,200 to 3,300
4,700
120
0.40
0.50
0.60
0.75
0.85
1k
0.75
0.85
0.87
0.90
0.95
10k
0.90
0.94
0.95
0.95
0.98
100k
1.00
1.00
1.00
1.00
1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
197
CAT. No. E1001N