MBR10100CT

SUZHOU GOOD-ARK ELECTRONIC CO., LTD
啞ね⦉枬䟄⷟匰↌㦘棟⏻⚇
Product Specification
GOODARK Type
MBR10100CT
Construction : : Schottky Barrier Rectifier
Application : For General Purpose
˄Manufacturer˅:
Suzhou Goodark Electronics Co.,Ltd
Prepared on Sep. 17th, 2008
Prepared: R & D Department
Approval˖QRA Department
SCHOTTKY BARRIER
RECTIFIER
10 AMPERES
100 VOLTS
CONTENTS
1.
Package Outline
2.
Marking
3.
Features& Mechanical Characteristics
4.
Maximum Ratings and Electrical Characteristics
5.
Rating and characteristic Curves
6.
Packing Specification PACKAGING SPECIFICATION
7.
Description of Box Label
1/6
SUZHOU GOOD-ARK ELECTRONIC CO., LTD
啞ね⦉枬䟄⷟匰↌㦘棟⏻⚇
1. Package Outline (TO220-AB)
UNIT:mm
Lead Frame Material : Copper
Plating: Pure Tin Plating
2/6
SUZHOU GOOD-ARK ELECTRONIC CO., LTD
啞ね⦉枬䟄⷟匰↌㦘棟⏻⚇
2.MARKING
Part Name :
MBR10100CT
Logo Mark:
MBR20200CT
Polarity˖
MBR10100CT
GD
3/6
SUZHOU GOOD-ARK ELECTRONIC CO., LTD
啞ね⦉枬䟄⷟匰↌㦘棟⏻⚇
3.Features& Mechanical Characteristics
Features
Ɣ Plastic package has underwriters Laboratory
Flammability Classification 94V-0
Ɣ Dual rectifier constructionˈpositive center tap
Ɣ Metal of silicon rectifierˈmajority carrier conduction
Ɣ Low forward voltageˈhigh efficiency
Ɣ Guarding for over voltage protection
Ɣ For use in low voltageˈhigh frequency invertersˈ
Ɣ Free wheelingˈand polarity protection applications
Mechanical Characteristics
Ɣ Case˖EpoxyˈMolded
Ɣ Weight: 1.9grams˄approximately˅
Ɣ Finish˖All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
Ɣ Lead Temperature for Soldering Purposes˖260°C Max.for10 sec
Ɣ Shipped 50 units per plastic tube
4.Maximum Ratings and Electrical Characteristics
MAXIMUM RATINGS and ELECTRICAL CHARACTERISTICS(TC=25°C unless otherwise moted)
PARAMETER
TEST CONDITIONS
SYMBOL
MBR10100CT
Maximum repetitive peak reverse voltage
100
VRRM
Working peak reverse voltage
100
VRWM
Maximum DC blocking voltage
100
VDC
Maximum average forward rectified current at
10
IF(AV)
Tc=105°C total device per diode
5.0
Peak forward surge current 8.3ms single half sine-wave
IFSM
120
superimposed on rated load per diode
Peak repetitive reverse current per leg at tp=2.0us ˈ
IRRM
0.5
1KHz
Isolation voltage (TO220F-AB only) from terminal to
1500
VAC
heatsink t = 1 sec
DV/dt
10000
Voltage rate of change˄rated VR˅
Operating junction temperature range
ʊ55 to +150
TJ
Storage temperature range
ʊ55 to +150
TSTG
Maximum instantaneous forward voltage per leg
IF=5.0A
Tc=25°C
0.85
VF
IF=5.0A
0.75
Tc=125ć
100
Maximum reverse current per leg at working peak
Tj=25°C
IR
6.0
Reverse voltage
Tj=100°C
Thermal Characteristics Ta=25°C unless otherwise noted
Symbol
RșJC
RșJA
Parameter
Thermal ResistanceˈJunction to Case per Leg
Thermal ResistanceˈJunction to Ambient per Leg
Note˖
1. Screw mounting with 4-40 screwˈwhere washer diameteris”4.9mm(0.19Dž)
2. Pulse test:300us pulse width,1% duty cycle
4/6
Max
2.0
62.5
Unit
°C/W
°C/W
UNIT
V
V
V
A
A
A
V
V/us
°C
°C
V
uA
mA
SUZHOU GOOD-ARK ELECTRONIC CO., LTD
啞ね⦉枬䟄⷟匰↌㦘棟⏻⚇
5.Rating and Characteristic Curves
5/6
SUZHOU GOOD-ARK ELECTRONIC CO., LTD
啞ね⦉枬䟄⷟匰↌㦘棟⏻⚇
6. Packing Specification
1 ˅Tube : 50units
2˅Inner Box: 20 tube(1000units)
3˅ Outer Box: 10 inner box (10,000units)
7ˊDESCRIPTION of BOX LABEL
1˅ Inner Box Label
2˅Inner Box Label
3˅Outer Box Label
4˅Outer Box Label
6/6