MBRF1090CT & MBRF10100CT FEATURES • Guardring for overvoltage protection • Lower power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ITO-220AB 1 PIN 1 2 3 PIN 2 TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. PIN 3 MECHANICAL DATA Case: ITO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 5.0 A x 2 VRRM 90 V, 100 V IFSM 120 A VF 0.75 V TJ max. 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBRF1090CT MBRF10100CT UNIT Maximum repetitive peak reverse voltage VRRM 90 100 V Working peak reverse voltage VRWM 90 100 V Maximum DC blocking voltage VDC 90 100 V IF(AV) 10 5.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 120 A Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz IRRM 0.5 A Maximum average forward rectified current at TC = 105 °C total device per diode Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage from terminal to heatsink with t = 1 min dV/dt 10 000 V/µs TJ, TSTG - 65 to + 150 °C VAC 1500 V ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage per diode (1) TEST CONDITIONS IF = 5.0 A IF = 5.0 A Maximum reverse current per diode at working peak reverse voltage (1) SYMBOL MBRF1090CT MBRF10100CT UNIT TC = 125 °C TC = 25 °C VF 0.75 0.85 V TJ = 25 °C TJ = 100 °C IR 100 6.0 µA mA Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle www.kersemi.com 1 MBRF1090CT & MBRF10100CT THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance per diode MBRF1090CT RθJC MBRF10100CT UNIT 6.8 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE ITO-220AB MBRF10100CT-E3/45 1.99 45 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 10 Instantaneous Forward Current (A) Average Forward Current (A) Resistive or Inductive Load 8 6 4 2 0 10 TJ = 100 °C TJ = 175 °C 1 TJ = 25 °C 0.1 0.01 50 0 100 150 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Case Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics Per Diode 120 100 Instantaneous Reverse Current (mA) Peak Forward Surge Current (A) TJ = 150 °C TJ = TJ Max. 8.3 ms Single Half Sine-Wave 100 80 60 40 20 TJ = 150 °C 10 TJ = 125 °C 1 TJ = 100 °C 0.1 0.01 TJ = 25 °C 0.001 0.0001 0 1 10 100 0 20 40 60 80 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 4. Typical Reverse Characteristics Per Diode www.keremi.com 2 MBRF1090CT & MBRF10100CT 1000 Junction Capacitance (pF) Transient Thermal Impedance (°C/W) 100 10 1 0.1 0.01 100 10 1 0.1 1 10 0.1 1 10 100 t - Pulse Duration (s) Reverse Voltage (V) Figure 5. Typical Transient Thermal Impedance Per Diode Figure 6. Typical Junction Capacitance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.671 (17.04) 0.651 (16.54) PIN 1 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.191 (4.85) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.110 (2.79) 0.100 (2.54) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) www.kersemi.com 3