TAK CHEONG ® MMBT3906T SEM IC O N DU C TO R SOT-523 General Purpose Transistor PNP Silicon Surface Mount Plastic Package Green Product Absolute Maximum Ratings (TA = 25°C unless otherwise noted) Symbol Parameter Value Units 3 VCBO Collector-Base Voltage -40 V VCEO Collector-Emitter Voltage -40 V VEBO Emitter-Base Voltage -5 V IC Collector Current -200 mA PD Power Dissipation (FR-4 Board – minimum pad) 200 mW Thermal Resistance from Junction to Ambient 600 °C /W -55 to +150 °C RθJA TJ TSTG Junction & Storage Temperature Range 2 1 SOT-523 (SC-75A) These ratings are limiting values above which the serviceability of the device may be impaired. Specification Features: Electrical Symbol: Simplifies Circuit Design RoHS Compliant Green EMC Matte Tin(Sn) Lead Finish Weight: approx. 0.002g Device Marking Code: 2A Electrical Characteristics (TA = 25°C unless otherwise noted) Off Characteristics Symbol Parameter V(BR)CEO Collector-Emitter Breakdown Voltage Test Condition Limits Unit Min Max IC =-1mA, IB =0A -40 - Volts (Note 1) V(BR)CBO Collector-Base Breakdown Voltage IC =-10uA, IE =0A -40 - Volts V(BR)EBO Emitter-Base Breakdown Voltage IE =-10uA, IB =0A -5 - Volts IBL Base Cutoff Current VCE =-30V, VEB =-3V - -50 nA ICEX Collector Cutoff Current VCE =-30V, VEB =-3V - -50 nA Note 1: Pulse Test. Pulse width <300us, Duty cycle < 2.0%. DB Number: DB-268 Nov. 2014, Revision A Page 1 TAK CHEONG ® SEM IC O N DU C TO R On Characteristics (Note 1) Parameter Symbol HFE VCE(sat) VBE(sat) DC Current Dain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Test Condition Limits Unit Min Max IC =-0.1mA, VCE =-1V 60 - IC =-1.0mA, VCE =-1V 80 - IC =-10mA, VCE =-1V 100 300 IC =-50mA, VCE =-1V 60 - IC =-100mA, VCE =-1V 30 - IC=-10mA, IB=-1mA - 0.25 IC=-50mA, IB=-5mA - 0.4 IC=-10mA, IB=-1mA 0.65 0.85 IC=-50mA, IB=-5mA - 0.95 - Volts Volts Small-signal Characteristics Parameter Symbol fT Test Condition Limits Unit Min Max 250 - MHz Current-Gain-Bandwidth Product IC =-10mA, VCE =-20V, f = 100MHz Cobo Output Capacitance VCB =-5V, IE =0A, f = 1.0MHz - 4.5 pF Cibo Input Capacitance VBE =-0.5V, IC =0A, f = 1.0MHz - 10 pF hie Input Impedancen VCE =-10V, IC =-1mA, f = 1.0kHz 2 12 pF hre Voltage Feedback Ratio VCE =-10V, IC =-1mA, f = 1.0kHz 0.1 10 X10 hfe Small-signal Current Gain VCE =-10V, IC =-1mA, f = 1.0kHz 100 400 - hoe Output Admittance VCE =-10V, IC =-1mA, f = 1.0kHz 3 60 θmhos NF Noise Figure VCE =-5V, IC =-100uA 4 dB -4 Rs=1.0kΩ f = 1.0kHz Switching Characteristics Symbol Parameter Test Condition Limits Min Max td Delay Time VCC =-3V, VBE =-0.5V, - 35 tr Rise Time IC =-10mA, IB1 =-1mA - 35 ts Storage Time VCC =-3V, IC =-10mA, - 225 tf Fall Time IB1 = IB2 =-1mA - 75 Unit nS nS DB Number: DB-268 Nov. 2014, Revision A Page 2 TAK CHEONG ® SEM IC O N DU C TO R SOT-523 Package Outline DIM Typical Soldering Pattern: MILLIMETERS INCHES MIN MAX MIN MAX A 0.70 0.90 0.028 0.035 A1 0.00 0.10 0.000 0.004 A2 0.70 0.80 0.028 0.031 b1 0.15 0.25 0.006 0.010 b2 0.25 0.35 0.010 0.014 c 0.10 0.20 0.004 0.008 D 1.50 1.70 0.059 0.067 E 0.70 0.90 0.028 0.035 E1 1.45 1.75 0.057 0.069 e e1 0.50 TYP. 0.90 L L1 θ 0.020 TYP. 1.10 0.035 0.40 REF. 0.10 0 O 0.043 0.016 REF. 0.30 8 O 0.004 0 O 0.012 8 O NOTES: 1. Above package outline conforms to JEITA EAIJ ED-7500A SC-75A. 2. Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions. DB Number: DB-268 Nov. 2014, Revision A Page 3 TAK CHEONG ® DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. Number: DB-100 April 14, 2008 / A