DATA SHEET SKY13491-21: 0.7 to 2.7 GHz SP14T MIPI® Antenna Switch Module Applications 2G/3G/4G multimode cellular handsets (LTE, UMTS, CDMA2000, EDGE, GSM, TDD-LTE, TD-SCDMA) Embedded data cards TRX1 TRX2 TRX3 TRX4 Features TRX5 Dedicated Band 7 TRX ports: 0.90 dB insertion loss @ 2.7 GHz High isolation and linearity Broadband frequency range: 0.7 to 2.7 GHz Twelve linear TRX ports Integrated low and high band GSM harmonic filters External MIPI select pin to enable multiple trigger controls Small MCM (22-pin, 2.5 x 2.9 x 0.8 mm) package (MSL3, 260 C per JEDEC J-STD-020) TRX6 TRX7 TRX8 ANT TRX9 TRX10 TRX11 TRX12 TXHB TXLB SCLK MIPI_SELECT SDATA VIO MIPI Decoder VDD Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. S3445 Figure 1. SKY13491-21 Block Diagram Description The SKY13491-21 is a Single-Pole, Fourteen-Throw (SP14T) antenna switch with an integrated Mobile Industry Processor Interface (MIPI®) controller. Using an advanced switching technology, the SKY13491-21 maintains low insertion and high isolation, which makes it an ideal choice for UMTS, CDMA2000, EDGE, GSM, and LTE applications. The design features two dedicated GSM transmit ports and three dedicated ultra low-loss TRX ports. The switch also has an excellent triple beat ratio and 2nd/3rd Order Intermodulation Distortion (IMD2/IMD3) performance. Switching is controlled by the MIPI decoder. There is an external MIPI select pin that enables how the switch responds to power mode triggers. When this pin is grounded, the switch responds to any of the power mode triggers. When this pin is left open, the switch responds to individual power mode triggers. No external DC blocking capacitors are required on the RF paths as long as no DC voltage is applied. The SKY13491-21 is manufactured in a compact, 2.5 x 2.9 x 0.8 mm, 22-pin surface mount Multi-Chip Module (MCM) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 1 TRX10 TRX11 TRX12 TRX1 17 16 15 14 13 SCLK TXHB 20 10 SDATA TXLB 21 9 VIO GND 22 8 VDD 7 MIPI_SELECT ANT 1 2 3 4 5 6 TRX3 11 TRX4 GND 19 TRX5 TRX2 TRX6 12 TRX7 TRX8 18 TRX9 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE S3444 Figure 2. SKY13491-21 Pinout – 22-Pin MCM (Top View) Table 1. SKY13491-21 Signal Descriptions Pin Name Description Pin Name Description 1 ANT Antenna port 12 TRX2 Ultra low-loss 3G WCDMA transmit/receive port 2. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 2 TRX7 3G WCDMA transmit/receive port 7. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 13 TRX1 Ultra low-loss 3G WCDMA transmit/receive port 1. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 3 TRX6 3G WCDMA transmit/receive port 6. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 14 TRX12 3G WCDMA transmit/receive port 12. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 4 TRX5 3G WCDMA transmit/receive port 5. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 15 TRX11 3G WCDMA transmit/receive port 11. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 5 TRX4 3G WCDMA transmit/receive port 4. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 16 TRX10 3G WCDMA transmit/receive port 10. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 6 TRX3 Ultra low-loss 3G WCDMA transmit/receive port 3. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 17 TRX9 3G WCDMA transmit/receive port 9. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 7 MIPI_SELECT MIPI interface select. When this pin is grounded, the switch responds to any of the power mode triggers. When this pin is left open, the switch is RFFE MIPI compliant and responds to individual power mode triggers. 18 TRX8 3G WCDMA transmit/receive port 8. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 8 VDD DC power supply 19 GND Ground 9 VIO MIPI decoder enable/reference voltage 20 TXHB GSM transmit high band. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 10 SDATA Data input/output 21 TXLB GSM transmit low band. This pin either connected directly to or is disconnected from pin 1, depending on the applied control data. 11 SCLK Clock signal 22 GND Ground Note: Bottom ground paddles must be connected to ground. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 2. SKY13491-21 Absolute Maximum Ratings Parameter Supply voltage Symbol VDD Minimum Maximum Units 2.5 6.0 V MIPI decoder enable/reference voltage VIO 2 V Clock signal voltage SCLK VIO V Data signal voltage SDATA VIO V RF input power: LTX pin HTX pin All TRXx pins PIN +36 +34 +31 dBm dBm dBm Storage temperature TSTG –55 +150 C Operating temperature TOP –30 +90 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13491-21 are provided in Table 2. Electrical specifications are provided in Tables 3 and 4. IMD2 and IMD3 test conditions for various frequencies are listed in Tables 5 and 6, respectively. Triple Beat Ratio (TBR) test conditions for bands 2 and 5 are listed in Table 7. Figure 3 shows a timing diagram. Figure 4 illustrates the test setup used to measure intermodulation products. This industry standardized test is used to simulate the WCDMA Band 1 linearity of the antenna switch. A +20 dBm Continuous Wave (CW) signal, fFUND, is sequentially applied to the TRX1 through TRX12 ports, while a –15 dBm CW blocker signal, fBLK, is applied to the ANT port. Table 8 shows the isolation matrix for "Ant" to "Off" arms. Table 9 shows the isolation matrix for "On" Arms to "Off" arms. Table 10 provides the matrix of insertion loss and return loss information. Table 11 describes the register content and programming read/write sequences. Refer to the MIPI Alliance Specification for RF Front-End Control Interface (RFFE), v1.10 (26 July 2011) for additional information on MIPI programming sequences and MIPI bus specifications. Figures 5 and 6 provide the timing diagrams for register write commands and read commands, respectively. Table 12 provides the Register_0 logic. Table 13 describes the register parameters and bit values. The resulting 3rd Order Intermodulation Distortion (IMD3), fRX, is measured over all phases of fFUND. The SKY13491-21 exhibits exceptional performance for all TRXx ports. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 3 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 3. SKY13491-21 DC Electrical Specifications (Note 1) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Supply voltage VDD Supply current, active mode IDD Interface supply voltage VIO Interface signal: High Low SDATA Test Condition Min Typical Max 2.50 2.85 6.00 V 50 100 μA 1.80 1.95 V 0.2 × VIO V V 5 5 μA μA Max Units 2.7 GHz 1.65 0.8 × VIO Control current: High Low Units Note 1: Performance is guaranteed only under the conditions listed in this Table. Table 4. SKY13491-21 RF Electrical Specifications (Note 1) (1 of 2) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Operating frequency f Insertion loss IL Test Condition Min Typical 0.7 TXLB, 824 to 915 MHz 1.25 1.45 dB TXHB, 1710 to 1910 MHz 1.25 1.45 dB TRX1 to TRX12 ports: 700 to 824 MHz 824 to 960 MHz 1710 to 1990 MHz 0.70 0.70 0.75 0.80 0.80 1.00 dB dB dB TRX4 to TRX12 ports (except TRX7): 2110 to 2170 MHz 2300 to 2690 MHz 0.80 1.05 1.05 1.25 dB dB TRX1/2/3 ports: 2110 to 2170 MHz 2300 to 2690 MHz 0.70 0.90 1.00 1.05 dB dB TRX7 port: 824 to 960 MHz 1710 to 1990 MHz 2110 to 2170 MHz 2300 to 2690 MHz 0.80 0.85 0.90 1.15 0.90 1.15 1.30 1.30 dB dB dB dB GSM LB TX: 2f0 attenuation 3f0 attenuation 4f0 attenuation H2LB H3LB H4LB 2f0 attenuation 1830 MHz 3f0 attenuation 2745 MHz 4f0 attenuation 3660 MHz 23 23 28 28 25 dB dB dB GSM HB TX: 2f0 attenuation 3f0 attenuation H2HB H3HB 2f0 attenuation 3820 MHz 3f0 attenuation 5730 MHz 21 15 28 28 dB dB 824 to 1910 MHz 1910 to 2690 MHz 23 20 28 23 dB dB 824 to 1910 MHz 1910 to 2690 MHz 19 16 23 20 dB dB 14 dB Isolation (TRXx to any off TRXx port [non-adjacent ports]) (See Table 8 for full matrix) Iso Isolation (TRXx to any off TRXx port [adjacent ports]) (See Table 8 for full matrix) Iso On state match Return Loss 0.7 to 2.7 GHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 4. SKY13491-21 RF Electrical Specifications (Note 1) (2 of 2) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units PIN = +33 dBm, 50 Ω PIN = +33 dBm, 3:1 VSWR –45 –36 –38 dBm dBm PIN = +35 dBm, 50 Ω PIN = +35 dBm, 3:1 VSWR –45 –36 –40 dBm dBm PIN = +25 dBm, 50 Ω, f = 704 to 2700 MHz –63 –59 dBm –40 dBm –81 –78 dBm 2fo, 3fo GSM harmonics: High band Low band TRXx harmonics 2fo, 3fo PIN = +25 dBm, 5:1 VSWR, f = 704 to 2700 MHz TRX1 through TRX10, band 13 2 harmonics nd nd 2fo PIN = +25 dBm, f = 787 MHz 2 Order Intermodulation Distortion IMD2 See test conditions in Table 5 –110 –105 dBm 3rd Order Intermodulation Distortion IMD3 See test conditions in Table 6 –110 –105 dBm Triple Beat Ratio: 650 to 900 MHz 1710 to 2155 MHz TBR See test conditions in Table 7 Turn-on time (See Figure 3) tON From application of VDD and VIO Switching speed (See Figure 3) tS Port to port dBc dBc +81 +81 2 20 μs 5 μs Note 1: Performance is guaranteed only under the conditions listed in this Table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 5 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 5. IMD2 Test Conditions Power Blocker (dBm) Receive Frequency (MHz) Frequency Blocker, Low (MHz) Frequency Blocker, High (MHz) 190 4090 2140.0 1880.0 80 3840 1960.0 1732.0 400 3864 Band Transmit Frequency (MHz) 1 1950.0 2 4 Transmit Power (dBm) +20 2132.0 –15 5 836.5 45 1718 881.5 7 2535.0 120 5187 2655.0 8 897.0 45 1839 942.0 Table 6. IMD3 Test Conditions Band Transmit Frequency (MHz) Transmit Power (dBm) 1 1950.0 1760.0 2140.0 2 1880.0 1800.0 1960.0 4 1732.0 1332.0 5 836.5 791.5 881.5 7 2535.0 2415.0 2655.0 8 897.0 852.0 942.0 +20 Frequency Blocker (MHz) Power Blocker (dBm) Receive Frequency (MHz) 2132.0 –15 Table 7. Triple Beat Ratio Test Conditions Band Transmit Frequency 1 (MHz) 2 1880.0 5 836.5 Transmit Power 1 (dBm) +21.5 Transmit Frequency 2 (MHz) 1881.0 837.5 Transmit Power 2 (dBm) +21.5 Frequency Blocker @ ANT (MHz) 1960.0 Power Blocker (dBm) –30 881.5 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D TBR Product Frequency (MHz) 1960.0 ± 1 881.5 ± 1 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE VDD (V) VDD Final VDD 50% of final VDD Time (μs) Rising edge of last clock signal that sets the switch into the desired state VIO VIO (V) – Interface Supply SCLK (V) – Interface Signal SCLK Time (μs) POUT (dBm) POUT 90% of POUT Time (μs) Switching Time tsw < 5 μs Switching Time (tSW) is measured from the rising edge of the last clock signal to 90% of RF power. Turn-on Time (tON) is measured from 50% of final VDD supply voltage to 90% of RF power. Turn-on Time tON ~ 20 μs Y0113 Figure 3. SKY13491-21. Timing Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 7 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 8. SKY13491-21: Isolation Matrix: Isolation “On” Arms to “Off” Arms (1 of 2) Isolation (dB) TXHB TRX1 TRX2 TRX3 TRX4 TRX5 TRX6 TRX7 TRX8 TRX9 TRX10 TRX11 TRX12 TXLB ON_Throw 0.915 freq_GHz TXLB –32 –52 –49 –48 –44 –42 –43 –42 –45 –47 –50 –50 –51 TXLB 1.91 –26 –49 –49 –43 –42 –46 –41 –39 –36 –38 –42 –44 –47 TXLB 2.69 –17 –45 –44 –42 –40 –41 –37 –35 –32 –34 –38 –40 –43 TXHB 0.915 –37 –47 –45 –52 –53 –53 –49 –46 –37 –41 –43 –53 –49 TXHB 1.91 –23 –40 –37 –44 –44 –44 –41 –38 –32 –35 –37 –55 –46 TXHB 2.69 –17 –49 –43 –53 –53 –52 –46 –52 –33 –35 –40 –34 –42 TRX1 0.915 –35 –50 –27 –50 –52 –54 –53 –48 –52 –49 –45 –43 –34 TRX1 1.91 –34 –33 –20 –41 –42 –42 –43 –38 –41 –40 –38 –35 –27 TRX1 2.69 –28 –29 –17 –37 –38 –38 –38 –34 –36 –36 –34 –31 –24 TRX2 0.915 –36 –55 –35 –48 –51 –53 –53 –48 –53 –51 –47 –45 –38 TRX2 1.91 –34 –35 –27 –39 –41 –41 –42 –37 –41 –42 –39 –37 –31 TRX2 2.69 –28 –30 –24 –36 –37 –37 –37 –34 –36 –37 –35 –33 –27 TRX3 0.915 –33 –56 –51 –48 –28 –36 –43 –43 –55 –59 –58 –56 –54 TRX3 1.91 –31 –35 –45 –43 –23 –30 –35 –34 –43 –47 –47 –45 –46 TRX3 2.69 –27 –31 –39 –35 –20 –27 –32 –31 –37 –41 –41 –40 –40 TRX4 0.915 –32 –52 –52 –49 –35 –29 –38 –41 –55 –59 –58 –55 –54 TRX4 1.91 –31 –36 –44 –41 –28 –23 –31 –32 –43 –47 –47 –45 –45 TRX4 2.69 –27 –31 –39 –34 –25 –20 –28 –29 –37 –41 –41 –39 –40 TRX5 0.915 –33 –48 –52 –49 –42 –35 –29 –35 –55 –58 –57 –54 –54 TRX5 1.91 –32 –35 –44 –40 –35 –28 –22 –28 –43 –46 –46 –44 –44 TRX5 2.69 –28 –32 –39 –35 –32 –25 –19 –24 –37 –41 –41 –39 –40 TRX6 0.915 –34 –46 –52 –49 –45 –41 –34 –30 –54 –56 –55 –53 –53 TRX6 1.91 –34 –35 –43 –40 –38 –34 –27 –23 –42 –45 –45 –43 –44 TRX6 2.69 –29 –34 –39 –34 –34 –31 –24 –19 –36 –40 –40 –38 –39 TRX7 0.915 –35 –44 –51 –49 –47 –45 –39 –36 –52 –54 –53 –52 –52 TRX7 1.91 –39 –36 –42 –39 –39 –37 –31 –28 –41 –43 –43 –42 –42 TRX7 2.69 –30 –36 –38 –34 –35 –33 –28 –25 –35 –38 –39 –37 –38 TRX8 0.915 –35 –42 –46 –46 –53 –54 –56 –52 –48 –30 –35 –38 –43 TRX8 1.91 –46 –36 –38 –36 –43 –44 –44 –43 –38 –24 –28 –31 –37 TRX8 2.69 –32 –34 –35 –32 –39 –39 –40 –38 –34 –20 –25 –27 –33 TRX9 0.915 –35 –44 –44 –44 –53 –55 –56 –52 –49 –37 –28 –35 –41 TRX9 1.91 –41 –37 –37 –35 –43 –44 –44 –43 –38 –29 –22 –28 –35 TRX9 2.69 –31 –45 –33 –31 –39 –39 –40 –38 –34 –25 –19 –25 –31 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 8. SKY13491-21: Isolation Matrix: Isolation “On” Arms to “Off” Arms (2 of 2) Isolation (dB) freq_GHz TXLB TXHB TRX1 TRX2 TRX3 TRX4 TRX5 TRX6 TRX7 TRX8 TRX9 TRX11 TRX12 TRX10 ON_Throw 0.915 –35 –45 –41 –43 –53 –55 –56 –52 –49 –40 –33 TRX10 –29 –37 TRX10 1.91 –37 –34 –35 –34 –43 –44 –44 –43 –38 –32 –27 –23 –31 TRX10 2.69 –31 –33 –32 –31 –39 –39 –39 –38 –34 –28 –24 –20 –28 TRX11 0.915 –35 –46 –37 –40 –53 –55 –55 –52 –49 –42 –39 –34 –30 TRX11 1.91 –35 –32 –31 –32 –43 –44 –44 –43 –38 –33 –31 –28 –24 TRX11 2.69 –29 –30 –28 –29 –39 –39 –39 –38 –34 –29 –28 –25 –21 TRX12 0.915 –35 –47 –28 –33 –51 –53 –55 –52 –49 –51 –46 –42 –37 TRX12 1.91 –35 –33 –22 –25 –42 –43 –43 –43 –38 –40 –38 –35 –30 TRX12 2.69 –29 –29 –19 –21 –38 –39 –39 –38 –34 –35 –34 –32 –26 Table 9. SKY13491-21 Isolation Matrix: Isolation "Ant" to "Off" Arms (1 of 2) (VDD = 2.85 V, TOP=+25 °C, Characteristic Impedance [Z0] = 50 Ω, Unless Otherwise Noted) Isolation (dB) ON_Throw freq_GHz TXLB TXHB TRX1 TRX2 TRX3 TRX4 TRX5 TRX6 TRX7 TRX8 TRX9 TRX10 TRX11 TRX12 ANT 0.915 –33 –47 –46 –40 –39 –40 –38 –35 –41 –43 –45 –46 –47 ANT 1.91 –43 –51 –50 –45 –41 –34 –32 –33 –42 –44 –47 –49 –50 ANT 2.69 –35 –46 –41 –43 –39 –33 –31 –33 –41 –43 –45 –45 –46 ANT 0.915 –44 –49 –46 –46 –45 –43 –41 –39 –42 –45 –47 –44 –47 ANT 1.91 –24 –40 –37 –39 –38 –36 –34 –32 –31 –34 –37 –36 –39 ANT 2.69 –21 –38 –34 –37 –35 –33 –31 –33 –28 –32 –34 –38 –40 ANT 0.915 –38 –35 –33 –49 –46 –45 –42 –40 –46 –50 –53 –49 –43 ANT 1.91 –33 –31 –26 –40 –39 –38 –36 –33 –38 –41 –42 –38 –31 ANT 2.69 –28 –31 –21 –37 –36 –36 –33 –30 –34 –37 –37 –34 –27 ANT 0.915 –37 –34 –43 –50 –47 –46 –43 –40 –46 –49 –52 –50 –45 ANT 1.91 –33 –30 –32 –41 –39 –39 –36 –33 –38 –41 –42 –39 –34 ANT 2.69 –28 –34 –27 –37 –36 –36 –33 –29 –34 –37 –38 –34 –29 ANT 0.915 –37 –36 –50 –48 –34 –41 –47 –41 –45 –46 –47 –47 –48 ANT 1.91 –31 –32 –39 –35 –29 –35 –37 –32 –38 –39 –40 –39 –40 ANT 2.69 –27 –37 –36 –32 –24 –30 –32 –28 –34 –36 –37 –36 –36 ANT 0.915 –36 –36 –49 –48 –44 –33 –43 –42 –45 –46 –47 –47 –48 ANT 1.91 –31 –33 –40 –36 –32 –28 –35 –32 –38 –39 –40 –39 –40 ANT 2.69 –27 –38 –36 –32 –28 –23 –30 –27 –34 –36 –37 –36 –37 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 9 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 9. SKY13491-21 Isolation Matrix: Isolation "Ant" to "Off" Arms (2 of 2) (VDD = 2.85 V, TOP=+25 °C, Characteristic Impedance [Z0] = 50 Ω, Unless Otherwise Noted) Isolation (dB) ON_Throw freq_GHz TXLB TXHB TRX1 TRX2 TRX3 TRX4 ANT 0.915 –38 –37 –49 –48 –50 ANT 1.91 –32 –33 –41 –37 ANT 2.69 –27 –41 –37 ANT 0.915 –39 –38 ANT 1.91 –33 ANT 2.69 ANT 0.915 ANT 1.91 ANT TRX5 TRX6 TRX7 TRX8 TRX9 TRX10 TRX11 TRX12 –43 –35 –40 –45 –46 –47 –47 –49 –39 –34 –29 –30 –38 –40 –40 –40 –41 –33 –35 –29 –24 –25 –34 –36 –37 –36 –37 –50 –48 –52 –50 –44 –37 –46 –47 –48 –48 –49 –34 –41 –38 –40 –39 –32 –28 –38 –40 –41 –40 –41 –27 –45 –37 –33 –36 –34 –28 –23 –34 –36 –37 –36 –37 –42 –39 –50 –48 –50 –50 –45 –42 –47 –48 –49 –49 –50 –36 –34 –41 –38 –40 –39 –34 –31 –38 –40 –41 –40 –41 2.69 –28 –45 –37 –33 –36 –35 –30 –27 –33 –36 –37 –36 –37 ANT 0.915 –41 –34 –55 –50 –47 –45 –44 –42 –40 –37 –46 –48 –54 ANT 1.91 –36 –29 –43 –39 –40 –38 –37 –35 –33 –31 –36 –36 –43 ANT 2.69 –28 –27 –38 –33 –36 –35 –34 –32 –30 –26 –31 –31 –38 ANT 0.915 –40 –36 –53 –50 –47 –45 –43 –41 –40 –41 –34 –45 –49 ANT 1.91 –36 –32 –43 –40 –40 –38 –37 –35 –33 –30 –29 –36 –42 ANT 2.69 –28 –37 –38 –34 –36 –35 –34 –32 –30 –26 –30 –37 ANT 0.915 –39 –36 –49 –49 –47 –45 –43 –41 –40 –43 –44 –36 –43 ANT 1.91 –35 –33 –42 –39 –40 –38 –37 –35 –33 –33 –33 –30 –38 ANT 2.69 –28 –40 –37 –33 –36 –35 –34 –32 –30 –28 –28 –26 –34 ANT 0.915 –39 –35 –42 –46 –47 –45 –44 –42 –40 –42 –46 –46 –34 ANT 1.91 –34 –32 –37 –38 –40 –38 –37 –35 –33 –33 –35 –33 –29 ANT 2.69 –28 –35 –32 –32 –36 –35 –35 –33 –30 –28 –31 –29 –25 ANT 0.915 –38 –35 –34 –40 –48 –46 –44 –42 –40 –46 –52 –50 –45 ANT 1.91 –33 –32 –29 –30 –40 –39 –38 –36 –33 –38 –41 –40 –34 ANT 2.69 –28 –31 –24 –24 –37 –36 –35 –33 –30 –34 –36 –36 –30 –25 Table 10. SKY13491-21: Insertion loss and Return loss Matrix (1 of 2) (VDD = 2.85 V, TOP=+25 °C, Characteristic Impedance [Z0]=50 Ω, Unless Otherwise Noted) IL (dB) RL_pole (dB) RL_throw (dB) TXLB ON_Throw 0.915 freq_GHz –1.3 –15.6 –18.5 TXLB 1.91 –25.4 –1.5 -0.2 TXLB 2.69 –28.9 –2.2 -0.5 TXHB 0.915 -0.8 –25.2 –18.4 TXHB 1.91 –1.3 –15.6 –16.1 TXHB 2.69 -8.1 –3.6 –2.0 TRX1 0.915 -0.6 –25.5 –22.7 TRX1 1.91 -0.8 –20.1 –23.6 TRX1 2.69 -0.9 –28.0 –19.6 TRX2 0.915 -0.6 –23.2 –21.4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 10. SKY13491-21: Insertion loss and Return loss Matrix (2 of 2) (VDD = 2.85 V, TOP=+25 °C, Characteristic Impedance [Z0]=50 Ω, Unless Otherwise Noted) ON_Throw freq_GHz IL (dB) RL_pole (dB) RL_throw (dB) TRX2 1.91 –0.7 –22.7 –28.7 TRX2 2.69 –0.9 –25.4 –19.8 TRX3 0.915 –0.6 –23.1 –21.7 TRX3 1.91 –0.7 –21.5 –24.9 TRX3 2.69 –0.9 –26.0 –18.8 TRX4 0.915 –0.6 –24.2 –23.5 TRX4 1.91 –0.7 –19.7 –22.5 TRX4 2.69 –0.9 –33.2 –21.2 TRX5 0.915 –0.5 –27.3 –27.7 TRX5 1.91 –0.8 –17.4 –20.1 TRX5 2.69 –0.9 –25.2 –27.8 TRX6 0.915 –0.5 –27.7 –29.3 TRX6 1.91 –0.8 –15.4 –17.2 TRX6 2.69 –0.9 –19.3 –22.3 TRX7 0.915 –0.6 –27.5 –27.3 TRX7 1.91 –0.9 –13.4 –14.9 TRX7 2.69 –1.1 –14.1 –15.7 TRX8 0.915 –0.6 –30.5 –25.5 TRX8 1.91 –0.8 –16.4 –18.8 TRX8 2.69 –0.9 –22.8 –22.9 TRX9 0.915 –0.6 –29.8 –25.7 TRX9 1.91 –0.8 –16.6 –18.9 TRX9 2.69 –0.9 –24.6 –23.0 TRX10 0.915 –0.6 –28.7 –26.1 TRX10 1.91 –0.8 –16.8 –18.9 TRX10 2.69 –0.9 –24.3 –22.1 TRX11 0.915 –0.6 –28.1 –25.9 TRX11 1.91 –0.8 –17.9 –20.8 TRX11 2.69 –0.9 –28.5 –23.7 TRX12 0.915 –0.6 –25.5 –23.5 TRX12 1.91 –0.8 –19.0 –22.2 TRX12 2.69 –0.9 –31.1 –22.2 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 11 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE fBLK 1760 MHz, –15 dBm fFUND 1950 MHz, +20 dBm fRX 2140 MHz, Measure Tone Circulator Signal Generator fFUND = 1950 MHz, +20 dBm Coupler to Monitor Input Power 1950 MHz Bandpass Filter Circulator Duplexer Phase Shifter SKY13491 fFUND = +20 dBm fBLK = –15 dBm Signal Generator fBLK = 1760 MHz, –15 dBm 1760 MHz Bandpass Filter Spectrum Analyzer fRX = 2140 MHz S3446 rd Figure 4. 3 Order Intermodulation Test Setup Table 11. Command Sequence Bit Definitions Extended Operation Type SSC C11C8 C7 C6-C5 C4 C3-C0 Parity Bits BPC DA7(1)DA0(1) Parity Bits BPC DA7(n)DA0(n) Parity Bits BPC Reg0 Write Y SA[3:0] 1 Data[6:5] Data[4] Data{3:0] Y Y – – – – – – Reg Write Y SA[3:0] 0 10 Addr[4] Addr[3:0] Y – Data[7:0] – – – Y Y Reg Read Y SA[3:0] 0 11 Addr[4] Addr[3:0] Y Y Data[7:0] – – – Y Y Legend: SSC = Sequence start command C = Command frame bits DA = Data/address frame bits BPC = Bus park cycle BC = Byte count (# of consecutive addresses) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE SCLK SDATA SA3 SA2 SA1 0 SA0 SSC 1 0 A4 A3 A2 A1 A0 P Example Register Write Command Frame SCLK P SDATA D7 D6 D5 D4 D3 D2 D1 P D0 Example Data Frame 0 Bus Park Signal Driven by Master Signal Not Driven; Pull-Down Only For Reference Only S3101 Figure 5. Register Write Command Timing Diagram SCLK SDATA SA3 SA2 SA1 0 SA0 1 1 A4 A3 A2 A1 A0 P Example Register Read Command Frame SSC SCLK SDATA P 0 D7 Bus Park D6 D5 D4 D3 D2 D1 Example Data Frame D0 P 0 Bus Park Signal Driven by Master Signal Not Driven; Pull-Down Only Signal Driven by Slave For Reference Only S3102 Figure 6. Register Read Command Timing Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 13 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 12. Register_0 Truth Table Register_0 Bits Antenna Path Bit[7] Bit[6] Bit[5] Bit[4] Bit[3] Bit[2] Bit[1] Bit[0] Sleep mode (standby) X 0 0 0 0 0 0 0 2G transmit low band X 0 0 0 1 0 1 0 2G transmit high band X 0 0 0 1 0 0 0 TRX1 X 0 0 0 0 1 0 0 TRX2 X 0 0 0 0 1 0 1 TRX3 X 0 0 0 0 1 1 0 TRX4 X 0 0 0 0 1 1 1 TRX5 X 0 0 0 1 0 0 1 TRX6 X 0 0 0 1 0 1 1 TRX7 X 0 0 0 1 1 0 0 TRX8 X 0 0 0 0 0 0 1 TRX9 X 0 0 0 0 0 1 0 TRX10 X 0 0 0 0 0 1 1 TRX11 X 0 0 0 1 1 0 1 TRX12 X 0 0 0 1 1 1 0 Isolation mode (warm-up) X 1 1 1 1 1 1 1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 13. Register Description and Programming (1 of 2) Register Name Address (Hex) Register_0 0000 Parameter Default (Binary) Description MODE_CTRL Bits[7:0]: SOFTWARE RESET Bit[7]: – Switch control. See Table 8 for logic 0 Resets all data to default values except for USID, GSID, or the contents of the PM_TRIG Register. 0 = Normal operation 1 = Software reset COMMAND_FRAME_PARITY_ERR Bit[6]: 0 Command sequence received with parity error – discard command. COMMAND_LENGTH_ERR Bit[5]: 0 Command length error. ADDRESS_FRAME_PARITY_ERR RFFE_STATUS 001A Bit[4]: 0 Address frame parity error = 1. DATA_FRAME_PARITY_ERR Bit[3]: READ_UNUSED_REG Bit[2]: WRITE_UNUSED_REG Bit[1]: BID_GID_ERR Bit[0]: 0 Data frame with parity error. 0 Read command to an invalid address. 0 Write command to an invalid address. 0 Read command with a BROADCAST_ID (refer to the MIPI Alliance Specification) or GSID. Reserved GROUP_SID 001B GSID Bits[7:4]: Reserved 0000 Bits[3:0]: 0000 Group slave ID Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 15 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Table 13. Register Description and Programming (2 of 2) Register Parameter Address (Hex) Name PWR_MODE Default (Binary) Description Bits[7:6]: 01 00 = Normal operation (active) 01 = Default settings (startup) 10 = Low power (low power) 11 = Reserved Trigger_Mask_2 Bit[5]: 0 If this bit is set, trigger 2 is disabled. When all triggers are disabled, if writing to a register that is associated with trigger 2, the data goes directly to the destination register. Trigger_Mask_1 PM_TRIG (Note 1) Bit[4]: 0 If this bit is set, trigger 1 is disabled. When all triggers are disabled, if writing to a register that is associated with trigger 1, the data goes directly to the destination register. 001C Trigger_Mask_0 Bit[3]: 0 If this bit is set, trigger 0 is disabled. When all triggers are disabled, if writing to a register that is associated with trigger 0, the data goes directly to the destination register. Trigger_2 Bit[2]: Trigger_1 Bit[1]: 0 If this bit is set, data is loaded into the trigger 2 registers. 0 If this bit is set, data is loaded into the trigger 1 registers (unsupported). Trigger_0 Bit[0]: 0 If this bit is set, data is loaded into the trigger 0 registers (unsupported). PRODUCT_ID 001D PRODUCT_ID Bits[7:0]: 01011101 This is a read-only register. However, during the programming of the Unique Slave Identifier (USID), a write command sequence is performed on this register but the value is not changed. MANUFACTURER_ID 001E MANUFACTURER_ID Bits[7:0]: 10100101 Read-only register Reserved Bits[7:6]: 00 Reserved MAN_USID 001F MANUFACTURER_ID Bits[5:4]: 01 Read-only register USID Bits[3:0]: 1011 Programmable USID. A write to these bits programs the USID. Note 1: Unlike the complete independence between triggers 0, 1, and 2, and also between the associated trigger masks 0, 1, and 2, respectively (as described in the MIPI RFFE Specification), when pin 7 is grounded, this device uses additional interactions between the provided trigger functions. The delayed application of updated data to all triggerable registers in this device may be accomplished using any of the three triggers (0, 1, or 2), provided that the particular trigger used is not currently masked off. If multiple triggers are enabled, any or all of those are sufficient to cause the data to be transferred from shadow registers to destination registers for all triggerable registers in the device. It is also necessary to disable all three triggers (i.e., set all three trigger masks) to ensure that data written to any triggerable register will immediately be written to the destination register at the conclusion of the RFFE command sequence where the data is written. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 16 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Evaluation Board Description Package and Handling Information The SKY13491-21 Evaluation Board is used to test the performance of the SKY13491-21 SP14T Switch. An Evaluation Board schematic diagram is provided in Figure 7. A recommended ESD protection circuit diagram is provided in Figure 8. An assembly drawing for the Evaluation Board is shown in Figure 9. Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The SKY13491-21 is rated to Moisture Sensitivity Level 3 (MSL3) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, PCB Design and SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. The PCB layout footprint for the SKY13491-21 is provided in Figure 10. Typical case markings are shown in Figure 11. Package dimensions for the 22-pin MCM are shown in Figure 12, and tape and reel dimensions are provided in Figure 13. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. RFC15 RFC14 RFC4 RFC3 GND TXHB TRX8 TRX7 TRX9 18 17 TRX10 4 TRX5 TRX11 5 TRX4 TRX12 14 6 TRX3 TRX1 13 VDD 7 MIPI_ SELECT 8 9 10 TRX2 RFC8 RFC9 16 3 TRX6 SCLIK RFC5 19 SDATA RFC6 ANT 20 VIO RFC7 2 GND 1 RFC13 21 TXLB 22 Pad 15 12 RFC10 RFC11 RFC12 RFC1 RFC2 11 C2 DNP 2 1 GND 3 SCLK 4 SDATA 5 VIO MIPI_SEL 6 VDD C1 DNP Y0683 DCH1 Header Figure 7. SKY13491-21 Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 17 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE 4.7 pF To Application Antenna To SKY13491 Antenna (Pin 1) 18 nH 18 nH ESD Circuit 1 12 pF To Application Antenna To SKY13491 Antenna (Pin 1) 8.2 nH ESD Circuit 2 S3447 Figure 8. SKY13491-21 Recommended ESD Protection Circuits Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 18 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Y0684 Figure 9. SKY13491-21 Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 19 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Stencil aperture size for center ground pad should be 80% to 100% (by area) of the solder mask opening 12X 0.5 14X 0.5 18X 0.2 2X 0.45 2.8 0.4 Pitch Pin 22 Package Outline Pin 1 2X 0.65 3.2 Pin 1 Indicator 0.30 X 45° Stencil Aperture Top View Thermal via array ø0.3 mm on 0.6 mm pitch will improve thermal performance. NOTE: thermal vias should be resinfilled and capped according to IPC-4761 Type VII vias. 30-35 μm Cu thickness recommended. 0.25 Typ. 9X 0.5 Opening size of 60 to 100% of exposed center opening shown 12X 0.6 14X 0.6 13X 0.5 16X 0.2 2.8 18X 0.3 2X 0.45 2.9 0.6 Pitch 0.4 Pitch 0.4 Pitch Pin 22 Package Outline Pin 1 Pin 22 Package Outline Pin 1 0.6 Pitch 3.2 Metallization Top View 2X 0.65 3.3 Pin 1 Indicator 0.30 X 45° Solder Mask Opening Top View All dimensions are in millimeters S3448 Figure 10. SKY13491-21 PCB Layout Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 20 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Pin 1 Indicator Skyworks Part Number Lot Code 13491 Date Code: YY = Calendar Year WW = Week XXXXX YYWW Y0682 Figure 11. Typical Part Markings (Top View) 4X 0.8 C 4X 0.4 0.2 A B C B 12X 1.35 Solder Mask Opening 2.9 14X 1.15 A 2.5 4X 0.2 Pin 22 B A Pin 1 Indicator 4X 0.6 0 22X SMT Pad 0.8 ± 0.1 Pin 1 Pin 1 Indicator See Detail C 0 0.1 M A B C 0.1 0.15 A B C Top View Bottom View Side View 0.25 ± 0.1 0.25 ± 0.1 Metal Pad Edge Soldermask Edges 0.25 ± 0.05 (0.1) 0.3 ± 0.05 0.2 ± 0.05 0.3 X 0.3 Metal Pad Edge (0.1) (0.1) 5X R0.05 Max Detail B Detail A Pad Scale: 2X 1X This Rotation 1X Rotated 180° 1X Rotated 90° CW 1X Rotated 90° CCW Pad Scale: 2X 4X This Rotation 4X Rotated 180° 5X Rotated 90° CW 5X Rotated 90° CCW 1.3 Detail C Full Scale 1X This Rotation All measurements are in millimeters Dimensioning and tolerancing according to ASME Y14.5M-1994 S3324 Figure 12. SKY13491-21 22-Pin MCM Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 21 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE ∅1.50 + 0.10/–0 B 5° Max. A 1.10 ± 0.05 (Ko) B A B Pin #1 Indicator ∅1.00 +0.25/–0 4.00 ± 0.10 Notes: 1. Carrier tape: black conductive polycarbonate. 2. Cover tape material: transparent conductive material. 3. 10 sprocket hole pitch cumulative tolerance: ±0.20 mm. 4. ESD surface resistivity meets GP01-D232. 5. Ao and Bo measured on plane 0.30 mm from bottom pocket. 6. All measurements are in millimeters. 2.75 ± 0.05 (Ao) A Figure 13. SKY13491-21 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 22 March 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 202835D Y0021 8.00 +0.30/–0.10 1.75 ± 0.10 3.50 ± 0.05 0.25 ± 0.02 3.10 ± 0.05 (Bo) 4.00 ± 0.10 2.00 ± 0.05 DATA SHEET • SKY13491-21 SP14T ANTENNA SWITCH WITH MIPI INTERFACE Ordering Information Model Name SKY13491-21 0.7 to 2.7 GHz SP14T Antenna Switch with MIPI Interface Manufacturing Part Number SKY13491-21 Evaluation Board Part Number SKY13491-21-EVB Copyright © 2013-2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 202835D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 12, 2014 23