DATA SHEET SKY13551-668LF: 0.4 to 3.8 GHz DP10T (SP5T/SP5T) Main/Receive Diversity Switch with MIPI RFFE Interface for Carrier Aggregation Applications 3G/4G multimode cellular handsets (UMTS, CDMA2000, LTE) Carrier aggregation diversity TRXA1 TRXA2 ANT_A TRXA3 Features TRXA4 Broadband frequency range: 0.4 to 3.8 GHz TRXA5 Dual antenna ports can be connected externally to a diplexer Small QFN (16-pin, 1.6 x 2.4 x 0.55 mm) package (MSL1, 260 C per JEDEC J-STD-020) TRXB2 ANT_B TRXB3 TRXB4 TRXB5 Bias VDD Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. TRXB1 Logic Block 203267D-001 Integrated, programmable MIPI interface using separate registers for ANT_A and ANT_B VIO SCLK SDATA GND Single, positive DC power supply (2.5 to 4.8 V) Figure 1. SKY13551-668LF Block Diagram Description The SKY13551-668LF is a dual single-pole, five-throw (2xSP5T) Mobile Industry Processor Interface (MIPI) controlled antenna switch designed specifically for receive diversity in carrier aggregation applications. The 2xSP5T switch is optimized for broadband performance. Using advanced switching technologies, the SKY13551-668LF maintains low insertion loss and high isolation for all switching paths. The high-linearity performance and low insertion loss achieved by the SKY13551-668LF makes it an ideal choice for carrier aggregation applications in both main and diversity antenna switching. The switch also exhibits excellent second/third order intermodulation distortion (IMD2/IMD3) performance. Switching is controlled by an integrated MIPI decoder. The two switches can be configured independently. There are separate registers for each SP5T switch. No external DC blocking capacitors are required on the RF paths as long as no DC voltage is applied to those paths. The SKY13551-668LF is manufactured in a compact, 1.6 x 2.4 x 0.55 mm, 16-pin surface-mount Quad Flat No-Lead (QFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 1 1 TRXB2 ANT_A TRXB1 ANT_B DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION 16 15 14 TRXA1 2 13 TRXA2 TRXB3 3 12 TRXA3 TRXB4 4 11 TRXA4 TRXB5 5 10 TRXA5 VDD 6 9 SCLK 8 SDATA VIO 7 203267D-002 Figure 2. SKY13551-668LF Pinout (Top View) Table 1. SKY13551-668LF Signal Descriptions1 Pin Name Description Pin Name Description 1 TRXB1 Ant B transmit/receive port 1 9 SCLK Clock 2 TRXB2 Ant B transmit/receive port 2 10 TRXA5 Ant A transmit/receive port 5 3 TRXB3 Ant B transmit/receive port 3 11 TRXA4 Ant A transmit/receive port 4 4 TRXB4 Ant B transmit/receive port 4 12 TRXA3 Ant A transmit/receive port 3 5 TRXB5 Ant B transmit/receive port 5 13 TRXA2 Ant A transmit/receive port 2 6 VDD DC power supply 14 TRXA1 Ant A transmit/receive port 1 7 VIO MIPI interface DC supply voltage 15 ANT_A Ant A port 8 SDATA Data 16 ANT_B Ant B port 1 Bottom ground paddles must be connected to ground. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Electrical and Mechanical Specifications Table 7 describes the register content and programming read/write sequences. Refer to the MIPI Alliance Specification for RF Front-End Control Interface (RFFE), v1.10 (26 July 2011) for additional information on MIPI programming sequences and MIPI bus specifications. The absolute maximum ratings of the SKY13551-668LF are provided in Table 2. Electrical specifications are provided in Tables 3 and 4. IMD2 and IMD3 test conditions for various frequencies are listed in Tables 5 and 6, respectively. Figure 4 provides the timing diagram for register write commands. Figure 5 provides the timing diagram for register read commands. Figure 3 illustrates the test setup used to measure intermodulation products. This industry standardized test is used to simulate the WCDMA linearity of the antenna switch. A +20 dBm continuous wave (CW) signal, fFUND, is sequentially applied to the TRX ports, while a –15 dBm CW blocker signal, fBLK, is applied to the ANT port. Register descriptions and programming information is provided in Table 8. Tables 9 and 10 provide the Register_0 and Register_1 logic, respectively. The resulting third order intermodulation distortion (IMD3), fRX, is measured over all phases of fFUND. The SKY13551-668LF exhibits exceptional performance for all RF ports. Table 2. SKY13551-668LF Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units 2.5 5.0 V 2 V VIO V Supply voltage VDD Digital control signal VIO SCLK port voltage VSCLK SDATA port voltage VSDATA VIO V LTE input power PIN +31 dBm Storage temperature TSTG –55 +150 C Operating temperature TOP –30 +90 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 3 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Table 3. SKY13551-668LF RF Electrical Specifications1 (1 of 2) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Operating frequency f Insertion loss IL Test Condition Min 0.4 ISO Max Units 3.8 GHz 0.60 0.60 0.7 1.0 1.2 1.6 dB dB dB dB dB dB ANT_A to any TRxA port ANT_B to any TRxB port: 0.40 0.45 0.5 0.80 1.0 1.3 400 to 824 MHz 824 to 960 MHz 1427 to 1511 MHz 1710 to 2170 MHz 2170 to 2690 MHz 3400 to 3800 MHz Isolation Typical ANT_A or ANT_B to any “off” TRx port: Up to 787 MHz Up to 960 MHz Up to 1511 MHz Up to 1990 MHz Up to 2170 MHz Up to 2690 MHz Up to 3800 MHz 31 30 24 22 21 18 15 34 33 29 25 24 21 18 dB dB dB dB dB dB dB 40 38 34 32 31 29 26 42 40 37 33 32 30 27 dB dB dB dB dB dB dB 31 26 25 22 18 32 28 26 23 19 dB dB dB dB dB ANT_A to any TRxB port ANT_B to any TRxA port: Up to 787 MHz Up to 960 MHz Up to 1511 MHz Up to 1990 MHz Up to 2170 MHz Up to 2690 MHz Up to 3800 MHz ANT_A to ANT_B: 400 to 960 MHz 1427 to 1511 Mhz 1710 to 1990 MHz 1980 to 2690 MHz 3400 to 3800 MHz “On” state match VSWR 400 to 2170 MHz 1.6:1 2:1 Second order intermodulation distortion IMD2 See Table 5 –105 –100 dBm Third order intermodulation distortion IMD3 See Table 6 –105 –100 dBm Low-band 2nd and 3rd harmonic 2fo, 3fo Any TRx port, PIN = +26 dBm, f = 900 MHz –70 –64 dBm Any TRx port, PIN = +26 dBm, f0 = 900 MHz, VSWR = 5:1 –65 –60 dBm Any TRxA and any TRxB port, PIN = +26 dBm, f1 = 1462 MHz, f2 = 1910 MHz –70 –65 dBm Any TRxA and any TRxB port, PIN = +26 dBm, f1 = 1462 MHz, f2 = 1910 MHz, VSWR = 5:1 –65 –58 dBm Any TRxA and any TRxB port, PIN = +26 dBm, f0 = 2690 MHz –61 –55 dBm Any TRxA and any TRxB port, PIN = +26 dBm, f0 = 2690 MHz, VSWR = 5:1 –59 –53 dBm nd rd Middle-band 2 and 3 harmonics nd rd High-band 2 and 3 harmonic 2fo, 3fo 2fo, 3fo Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Table 3. SKY13551-668LF RF Electrical Specifications1 (2 of 2) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units nd Band 13 2 harmonic 2fo Any TRx port, PIN = +25 dBm, f0 = 782 MHz –77 dBm Band 17 3rd harmonic 3fo Any TRx port, PIN = +25 dBm, f = 707 MHz –77 dBm Turn-on time tON From application of VDD and VIO or transition from low power mode 20 μs Wake-up time tW From isolation state 2 5 μs Switching speed tSW Any state to any other state 2 5 μs 1 Performance is guaranteed only under the conditions listed in this table. Table 4. SKY13551-668LF DC Electrical Specifications1 (VDD = 2.85 V, VIO = 1.8 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Supply voltage Test Condition VDD Supply current, active mode IDD Interface supply voltage level VIO Digital data and clock signals: High Low VSDATA, VSCLK Interface supply current IVIO Min Typical Max Units 2.50 2.85 4.8 V 35 100 μA 1.65 1.80 1.95 V VIO 0.2 × VIO V V 50 μA 0.8 × VIO 0 5 1 Performance is guaranteed only under the conditions listed in this table. Table 5. IMD2 Test Conditions Band Transmit Frequency (MHz) 1 1950 190 4090 2140 2 1880 80 3840 1960 4 1732 400 3864 2132 5 836.5 45 1718 7 2535 120 5187 2655 8 897 45 1839 942 11/21 1452 2952 1500 Transmit Power (dBm) Frequency Blocker, Low (MHz) +20 Frequency Blocker, High (MHz) Power Blocker (dBm) Receive Frequency (MHz) 881.5 –15 Table 6. IMD3 Test Conditions Transmit Frequency (MHz) Band Transmit Power (dBm) Frequency Blocker (MHz) Power Blocker (dBm) Receive Frequency (MHz) 1 1950 1760 2140 2 1880 1800 1960 4 1732 5 836.5 7 2535 1332 +20 791.5 2132 –15 2415 881.5 2655 8 897 852 942 11/21 1452 1404 1500 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 5 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION fBLK 1760 MHz, –15 dBm fFUND 1950 MHz, +20 dBm fRX 2140 MHz, Measure Tone Circulator Signal Generator fFUND = 1950 MHz, +20 dBm Coupler to Monitor Input Power 1950 MHz Bandpass Filter Circulator Duplexer Skyworks Switch fFUND = +20 dBm fBLK = –15 dBm Phase Shifter Signal Generator fBLK = 1760 MHz, –15 dBm 1760 MHz Bandpass Filter Spectrum Analyzer fRX = 2140 MHz 203267D-003 Figure 3. Typical Third Order Intermodulation Test Setup Table 7. Command Sequence Bit Definitions Extended Operation Type SSC C11-C8 C7 C6-C5 C4 C3-C0 Parity Bits Reg_0 Write, Short Command Y SA[3:0] 1b Data[6:5] Data[4] Data{3:0] Y Y – – – – – – Reg_0 Write, Long Command Y SA[3:0] 0 10b Addr[4] Addr[3:0] Y – Data[7:0] – – – Y Y Reg_1 Write Y SA[3:0] 0 10b Addr[4] Addr[3:0] Y – Data[7:0] – – – Y Y Reg Read Y SA[3:0] 0 11b Addr[4] Addr[3:0] Y Y Data[7:0] – – – Y Y Legend: SSC = Sequence start command C = Command frame bits DA = Data/address frame bits BPC = Bus park cycle BPC DA7(1)DA0(1) Parity Bits BPC DA7(n)DA0(n) Parity Bits BPC BC = Byte count (# of consecutive addresses) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION SCLK SDATA SA3 SA2 SA1 0 SA0 SSC 1 0 A4 A3 A2 A1 A0 P Example Register Write Command Frame SCLK SDATA P D7 D6 D5 D4 D3 D2 D1 P D0 Example Data Frame 0 Bus Park Signal Driven by Master Signal Not Driven; Pull-Down Only For Reference Only 203267D-004 Figure 4. Register Write Command Timing Diagram SCLK SDATA SA3 SA2 SA1 0 SA0 1 1 A4 A3 A2 A1 A0 P Example Register Read Command Frame SSC SCLK SDATA P 0 Bus Park D7 D6 D5 D4 D3 D2 D1 Example Data Frame Signal Driven by Master Signal Not Driven; Pull-Down Only Signal Driven by Slave For Reference Only D0 P 0 Bus Park 203267D-005 Figure 5. Register Read Command Timing Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 7 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Table 8. Register Description and Programming Register Name Address (Hex) Register_0 0000 MODE_CTRL Bits[6:0]: Register_1 0001 MODE_CTRL Bits[7:0]: PWR_MODE Bits[7:6]: Parameter Default (Binary) Description 0000000 See Table 10 for logic 00000000 See Table 11 for logic 00 00 = Normal operation (active) 01 = Default settings (startup) 10 = Low power (low power) 11 = Reserved Trigger_Mask_2 Bit[5]: 0 If this bit is set, trigger 2 is disabled. When all triggers are disabled, if writing to a register that is associated with trigger 2, the data goes directly to the destination register. Trigger_Mask_1 PM_TRIG (Note 1) Bit[4]: 0 If this bit is set, trigger 1 is disabled. When all triggers are disabled, if writing to a register that is associated with trigger 1, the data goes directly to the destination register. 001C Trigger_Mask_0 Bit[3]: 0 If this bit is set, trigger 0 is disabled. When all triggers are disabled, if writing to a register that is associated with trigger 0, the data goes directly to the destination register. Trigger_2 Bit[2]: Trigger_1 Bit[1]: 0 If this bit is set, data is loaded into the trigger 2 registers. 0 If this bit is set, data is loaded into the trigger 1 registers. Trigger_0 Bit[0]: 0 If this bit is set, data is loaded into the trigger 0 registers. PRODUCT_ID 001D PRODUCT_ID Bits[7:0]: 11010110 This is a read-only register. However, during the programming of the Unique Slave Identifier (USID), a write command sequence is performed on this register but the value is not changed. MANUFACTURER_ID 001E MANUFACTURER_ID Bits[7:0]: 10100101 Read-only register Reserved Bits[7:6]: 00 Reserved MAN_USID 001F MANUFACTURER_ID Bits[5:4]: 01 Read-only register USID Bits[3:0]: 1010 Programmable USID. A write to these bits programs the USID. 1 Unlike the complete independence between triggers 0, 1, and 2, and also between the associated trigger masks 0, 1, and 2, respectively, as described in the MIPI RFFE Specification, this device uses additional interactions between the provided trigger functions. The delayed application of updated data to all triggerable registers in this device may be accomplished using any of the three triggers (0, 1, or 2), provided that the particular trigger used is not currently masked off. If multiple triggers are enabled, any or all of those are sufficient to cause the data to be transferred from shadow registers to destination registers for all triggerable registers in the device. It is also necessary to disable all three triggers (i.e., set all three trigger masks) to ensure that data written to any triggerable register will immediately be written to the destination register at the conclusion of the RFFE command sequence where the data is written. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Table 9. Register_0 Truth Table (Ant B) Register 0 Bits On State D7 D6 D5 D4 D3 D2 D1 D0 All isolation 0 0 0 0 0 TRxB1 0 0 0 0 1 TRxB2 0 0 0 1 0 TRxB3 0 0 0 1 1 TRxB4 0 0 1 0 0 TRxB5 0 0 1 0 1 Isolation 0 0 1 1 0 TRxB5 0 0 1 1 1 TRxB4 0 1 0 0 0 TRxB3 0 1 0 0 1 TRxB2 0 1 0 1 0 TRxB1 0 1 0 1 1 TRxB5+4 0 1 1 0 0 TRxB5+3 0 1 1 0 1 TRxB5+2 0 1 1 1 0 TRxB5+1 0 1 1 1 1 TRxB4+3 1 0 0 0 0 TRxB4+2 1 0 0 0 1 TRxB4+1 1 0 0 1 0 TRxB3+2 1 0 0 1 1 TRxB3+1 1 0 1 0 0 TRxB2+1 1 0 1 0 1 All isolation 1 0 1 1 0 All isolation 1 0 1 1 1 All isolation 1 1 0 0 0 All isolation 1 1 0 0 1 All isolation 1 1 0 1 0 All isolation 1 1 0 1 1 All isolation 1 1 1 0 0 All isolation 1 1 1 0 1 All isolation 1 1 1 1 0 All isolation 1 1 1 1 1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 9 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Table 10. Register_1 Truth Table (Band A) Register 0 Bits On State D7 D6 D5 D4 D3 D2 D1 D0 All isolation 0 0 0 0 0 TRxA1 0 0 0 0 1 TRxA2 0 0 0 1 0 TRxA3 0 0 0 1 1 TRxA4 0 0 1 0 0 TRxA5 0 0 1 0 1 Isolation 0 0 1 1 0 TRxA5 0 0 1 1 1 TRxA4 0 1 0 0 0 TRxA3 0 1 0 0 1 TRxA2 0 1 0 1 0 TRxA1 0 1 0 1 1 TRxA5+4 0 1 1 0 0 TRxA5+3 0 1 1 0 1 TRxA5+2 0 1 1 1 0 TRxA5+1 0 1 1 1 1 TRxA4+3 1 0 0 0 0 TRxA4+2 1 0 0 0 1 TRxA4+1 1 0 0 1 0 TRxA3+2 1 0 0 1 1 TRxA3+1 1 0 1 0 0 TRxA2+1 1 0 1 0 1 All isolation 1 0 1 1 0 All isolation 1 0 1 1 1 All isolation 1 1 0 0 0 All isolation 1 1 0 0 1 All isolation 1 1 0 1 0 All isolation 1 1 0 1 1 All isolation 1 1 1 0 0 All isolation 1 1 1 0 1 All isolation 1 1 1 1 0 All isolation 1 1 1 1 1 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Evaluation Board Description Package and Handling Information The SKY13551-668LF Evaluation Board is used to test the performance of the SKY13551-668LF DP10T Switch. An Evaluation Board schematic diagram is provided in Figure 6. A recommended ESD protection circuit diagram is provided in Figure 7. An assembly drawing for the Evaluation Board is shown in Figure 8. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The SKY13551-668LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. The PCB layout footprint for the SKY13551-668LF is provided in Figure 9. Typical part markings are shown in Figure 10. Package dimensions are shown in Figure 11, and tape and reel dimensions are provided in Figure 12. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. RFC7 RFC6 16 15 RFC4 RFC3 RFC2 RFC1 1 TRXB1 TRXA1 14 2 TRXB2 TRXA2 13 3 TRXB3 TRXA3 12 4 TRXB4 TRXA4 11 5 TRXB5 TRXA5 10 7 8 4 3 VIO 6 VDD RFC8 RFC9 RFC10 RFC11 RFC12 SCLK 9 SDATA RFC5 ANT_A ANT_B 17 C2 100 nF 1 2 5 6 C1 100 nF DCH1 Header 203267D-006 Figure 6. SKY13551-668LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 11 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION 4.7 pF To Application Antenna To SKY13551-668LF Antenna 18 nH 18 nH ESD Circuit 1 12 pF To Application Antenna To SKY13551-668LF Antenna 8.2 nH ESD Circuit 2 203267D-007 Figure 7. SKY13551-668LF Recommended ESD Protection Circuits TRXB3 TRXB2 TRXB4 TRXB1 RF 2 RFB 4 RFB3 RFB TRXB5 B1 B5 RF DCH1 GND VDD C2 VIO SDATA SCLK GND 1 L1 U1 ANT_A A5 RF RF A1 ANT_A RFA3 2 RFA RFA 4 ANT_B B ANT_ C1 TRXA5 TRXA1 TRXA4 TRXA2 TRXA3 203267D-008 Figure 8. SKY13551-668LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION 4X 0.2000 12X 0.500 Pin 16 16X Exposed Soldering Area Pin 1 Indicator 0.200 X 0.200 Pin 1 4X 1.000 4X 0.600 4X 0.200 0.800 4X 0.900 0.500 16X 0.200 16X 0.300 All dimensions are in millimeters. 203267D-009 Figure 9. SKY13551-668LF PCB Layout Footprint (Top View) Skyworks Part Number Supplier Code (First Character) XXXX is for QYL Code Character 1 = Q/Y Code Characters 2, 3, and 4 = Lot Code Pin 1 Indicator 203267D-010 Figure 10. Typical Part Markings (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 13 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION 1.60 Seating Plane C A B Pin 1 Indicator 12X 0.600 4X 0.200 –0.004~0.046 Pin 16 Pin 1 Indicator 0.2 X 45° Pin 1 16X 0.100 0.400 Pitch 8X 1.000 0.8 ±0.1 2.40 2X 0.05 C 2X 4X 0.600 4X 0.200 Detail A 0.110 Ref 0.05 C 16X 0.05 C 0.55 ± 0.05 3 Exposed Pad 0.5 ±0.1 0.05 C Top View Side View Bottom View Notes: 1. 2. 3. 4. 5. Dimensions and tolerances according to ASME Y14.5M-1994. All measurements are in millimeters. Coplanarity applies to the terminals as well as all other bottom surface metallization. Plating requirements per source control drawing (SCD) 2504. Dimension applies to metallized terminal. If terminal tip has a radius, dimension should not be measured in that radius area. 6. Unless otherwise specified, the following values apply: Decimal Tolerance: Angular Tolerance: X.X (1 place) ± 0.1 mm ± 0.5° X.XX (2 places) ± 0.05 mm X.XXX (3 places) ± 0.025 mm Detail A Scale: 100X 0.2 ± 0.05 4X R0.020 0.2 ± 0.05 4X This Rotation 4X Rotated 180° 4X Rotated 90° CW 4X Rotated 90° CCW 0.10 M C A B 5 203267D-011 Figure 11. SKY13551-668LF Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D 2.60 ±0.05 (Bo) 5° 8.0 ±0.20 0.20 ±0.05 (T) A 3.5 ±0.05 Pin 1 4.0 ±0.10 2.0 ±0.05 B Ø1.50 +0.1 1.75 ±0.10 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION A B Ø0.50 ±0.10 4.0 ±0.10 0.75 ±0.05 (Ko) 5° Section B 1.80 ±0.05 (Ao) User Feed Direction Section A Notes: 1. 2. 3. 4. 5. 6. Carrier tape material: black conductive polystyrene or polycarbonate. Cover tape material: transparent conductive. ESD surface resistivity shall be ≤1 x 1010 Ohms/square per EIA, JEDEC TNR specification. 10-sprocket hole pitch cumulative tolerance: ±0.20 mm. Ao and Bo measured on plane 0.30 mm above the bottom of the pocket. All dimensions are in millimeters. 203267D-012 Figure 12. SKY13551-668LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203267D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • January 22, 2016 15 DATA SHEET • SKY13551-668LF: MAIN/RECEIVE DIVERSITY SWITCH FOR CARRIER AGGREGATION Ordering Information Model Name SKY13551-668LF: 0.4 to 3.8 GHz DP10T Switch Manufacturing Part Number SKY13551-668LF Evaluation Board Part Number SKY13551-668LF-EVB Copyright © 2014-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 16 January 22, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 203267D