Sealed Weather-Proof Construction Smaller Lighter More Powerful MINV Military Power Inverter MPC Military Power Conditioner MPS Military Power Supply Made in USA Military Power Systems MINV Military Power Inverter Military Grade Power Inverter (minv) SynQor’s Military Inverter units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s MINV incorporates field proven high efficiency designs and rugged packaging technologies. This MINV will accept a wide range of steady-state and transient DC input voltage values while delivering a well-conditioned AC output to the load. Options include a selection of output voltage amplitudes, frequencies, and configurations that provide a single output, two or three single phase outputs, or a 3 phase output. MINV Product Features Specification Compliance MINV-4000 units are designed to meet (pending): Sealed, weather-proof, shock-proof construction 4000W (5000VA) output power Full power operation: -40°C to +55°C DC Input Pure sinusoidal AC output voltage (115VAC, 60Hz) Handles 0.0—1.0 power factor loads and non-linear loads Up to 3 units can be combined for higher power, voltage or a 3-phase AC output Battle Mode for over-temperature events User I/O and Configuration signal ports 1U high rack mount unit (17" x 22.41") Low weight: 30 lbs. MIL-STD-1399-300 - Interface Shipboard MIL-STD-810 - Environmental Engineering MIL-STD-461 - Electromagnetic Interference MIL-STD-704 - Aircraft Electrical Power MIL-STD-1275 - Vehicle Electrical Power Option 28V or 180V DC input 115Vrms or 230Vrms AC output 50Hz, 60Hz, or 400Hz AC output Multiple single-phase outputs and 3-Phase output configurations available Shipboard version with floating neutral wire MINV-4000-1U UNIT with DC Input/AC Output 28V Rear Panel 1.73" 1U AC Output Fan Exhaust Ethernet User CONFIG Port I/O Port Fan Exhaust DC Input Fan Exhaust DC Input 180V Rear Panel AC Output Family Output Power Height 4000W MINV 4000: 1U:1.73” 5000VA Fan Exhaust DC Input Voltage 28V: 28VNOM 180:180VNOM Ethernet User CONFIG Port I/O Port AC Output Voltage Output AC Output Neutral AC Set Point Wire Frequency 1: 115Vrms G: Grounded 2: 230Vrms F: Floating 3: 240Vrms 5: 50Hz 6: 60Hz 4: 400Hz Output Configuration S: One Single-Phase Output D: Two Single-Phase Output T: Three Single-Phase Output Y: One Three-Phase Output Additional Options 000: None 0CE: CE Marking E00: Ethernet / SNMP ECE: Ethernet / SNMP & CE Marking Part Numbering Example: MINV-4000-1U-28V-1G6S-E00 For valid part numbers, refer to the website or contact your local sales representative. MPS Military Power Supply Military Grade Power Supply (MPS) SynQor’s Military AC-DC Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s MPS incorporates field proven high efficiency designs and rugged packaging technologies. This MPS will accept a 3-Phase input with a wide range of input voltage and frequency values while delivering a well‑conditioned continuous 4000W (5250W transient), DC semi-regulated output to the load. The output voltage droops for system stability and for load sharing when units are in parallel. The MPS-4000 Power Supply is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards MPS Product Features Specification Compliance Sealed, weather-proof, shock-proof construction 4000W output power Full power operation: -40°C to +55°C 3-Phase input: 80-265Vrms line-to-line; 47-800Hz Power factor correction at AC input Up to 8 units can be combined for higher power User I/O and Configuration signal port Synchronized start and stop of multiple units Battle Mode for over-temperature events 1U high rack mount unit (17" x 20.42") Low weight: 28 lbs. MPS units are designed to meet: MIL-STD-1399-300 - Interface Shipboard MIL-STD-810 - Environmental Engineering MIL-STD-461 - Electromagnetic Interference MIL-STD-704 - Aircraft Electrical Power MIL-STD-1275 - Vehicle Electrical Power MPS-4000-1U UNIT Rear Panel 1.73" 1U DC Output Fan Exhaust Ethernet Port User CONFIG I/O Port AC Input Fan Exhaust Ground Stud Circuit (1/4-20) Breaker Family Output Power Height AC Input Phase # AC Input Frequency DC Output Voltage @ Full Load* Output Regulation MPS 4000: 4000W 1U: 1.73" 3: 3-Phase W: 47-800Hz 2B: 24V 2D: 28V 2E: 30V 4B: 48V S00: Semi-regulated Network E00: Ethernet/SNMP ECE: Ethernet / SNMP & CE Marking Part Numbering Example: MPS-4000-1U-3W2ES00-E00 For valid part numbers, refer to the website or contact your local sales representative. *Approximate output voltage at full load, output voltage has droop MPC Military Power Conditioner Military Grade Power Conditioner (MPC) SynQor’s Military Power Conditioner units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. SynQor’s MPC incorporates field proven high efficiency designs and rugged packaging technologies. This MPC will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC output to the load. Options include two DC outputs and the ability to also draw power from a military standard 28VDC input. MPC Product Features Specification Compliance Sealed, weather-proof, shock-proof construction 1250W (1500VA) output power Full power operation: -40°C to +55°C Universal AC input: 80-265VAC; 47-65Hz (see options) Power factor correction at AC input Dual input (AC and optional DC) True on-line double conversion Pure sinusoidal AC output voltage (115VAC, 60Hz) Handles 0.0—1.0 power factor loads and non-linear loads Up to 3 units can be combined for higher power, voltage or a 3-phase AC output User I/O and Configuration signal ports 1U high rack mount unit (17" x 21.6") Low weight: 24 lbs. MPC-1500 units are designed to meet: MIL-STD-1399-300 - Interface Shipboard MIL-STD-810 - Environmental Engineering MIL-STD-461 - Electromagnetic Interference MIL-STD-704 - Aircraft Electrical Power MIL-STD-1275 - Vehicle Electrical Power Option DC input (28Vnom) for dual source Wide-range AC input frequency: 47Hz to 800Hz 115Vrms or 230Vrms AC output 50Hz, 60Hz, or 400Hz output DC1: Auxiliary isolated DC output (up to 500W) DC2: High power DC output (up to 1250W) parallelable for higher power Total AC & DC1 & DC2 output power = 1250W Shipboard version with floating neutral wire MPC-1500-1U UNIT with DC Input/DC1 Output Options Rear Panel 1.73" 1U DC1 Output Optional AC Output Fan Exhaust Ethernet Port User CONFIG Ground DC Input Stud Optional I/O Port (1/4-20) Fan Exhaust AC Input AC Circuit Breaker MPC-1500-1U UNIT with DC1 Output/DC2 Output Options DC2 Output Optional Family Output Power Height AC Input Frequency AC Output Voltage AC Output Neutral Wire 1500VA L: 47-65Hz 1: 115Vrms G:Grounded MPC 1500: 1U:1.73" 1250W W: 47-800Hz 2: 230Vrms F:Floating AC Output Set Point Frequency DC INPUT/DC2 Output Configuration S: Not Installed D: DC Input 5: 50Hz M: DC2 Out 24VDC, Droop Share 6: 60Hz P: DC2 Out 24VDC, No Sharing 4: 400Hz R: DC2 Out 28VDC, Droop Share V: DC2 Out 28VDC, No Sharing DC1 Output 00: 12: 15: 24: 28: 40: 50: Additional Options None 12V 000: None 15V 0CE: CE Marking 24V E00: Ethernet / SNMP 28V ECE: Ethernet / SNMP 40V & CE Marking 50V Part Numbering Example: MPC-1500-1U-L1G6D28-E00 For valid part numbers, refer to the website or contact your local sales representative. Military Grade Power Systems Mechanicals MPS 20.42" MPC 21.6" MINV 22.41" UNIT MOUNTING 1.50 " 17" MADE IN USA 1.73 " SynQor Headquarters 155 Swanson Road, Boxborough, MA 01719-1316 USA | 1.888.567.9596 (USA only) | www.synqor.com Advancing The Power Curve® Headquartered in Boxborough, Massachusetts, at the location of its manufacturing operations, SynQor is a privately owned U.S. AS9100 and ISO9001 company. SynQor’s converters feature a patented two-stage power topology that greatly improves efficiency and optimizes the power dissipated by the converter. With a design center in Dallas, Texas, and sales/marketing offices throughout the World, SynQor is the technology, quality and service leader for power conversion modules and systems. SynQor’s rugged DC-DC converters, AC-DC converters, filters and systems are designed for a wide range of industrial and military applications including those required to withstand harsh environments: railway and transportation systems, industrial motion control, information displays, factory automation, critical military and power generation systems. The SynQor series of Military Power Supplies, Hi-Rel and Mil-COTS DC‑DC converters and EMI filters brings SynQor’s field proven high-efficiency synchronous-rectifier technology to the Military/Aerospace industry. SynQor, Inc. 155 Swanson Road Boxborough, MA 01719-1316 Toll Free (USA): 888-567-9596 E-mail: [email protected] Phone: 978-849-0600 Fax: 978-849-0602 www.SynQor.com 006-0006702 09.11.15 REV B Made in USA