Ceramic PTC Thermistor: PLA Series Lighting Application Features 1. RoHS compliant 2. For frequent switching 3. Small size 4. Low, medium, and high resistance ratings 5. Stable over a long life 6. Operating temperature range: 0 ~ +60°C (V=Vmax) -25 ~ +125°C (V=0) Recommended Applications 1. Electronic ballast for lamps, switching 2. Energy saving lamp Part Number Code P L A 0 3 1 5 1 N P 8 D 2 Y 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Tolerance of R25 Dimensions Product Code PL THINKING Ceramic PTC Thermistor PL Series 03 06 Resistance (R25) ψ3mm 850 85Ω ψ6mm 151 150Ω 152 1.5KΩ Series A M H N T S Q Y ±20% ±25% ±30% ±40% 15 16 Curie Temperature P6 P8 A0 A2 Internal Control Code 60℃ 80℃ 100℃ 120℃ +35 ~ -15% Packaging +30 ~ -20% Special Withstanding Voltage (VW) Leaded Type 320V 420V 500V 600V 700V 800V C2 D2 E0 F0 G0 H0 Dimensions Y X V W U Bulk Ammo Box Pitch 12.7mm Ammo Box Pitch 15mm Taping & Reel Pitch 12.7mm Taping & Reel Pitch 15mm T D H 51 25 (max.) d (Unit: mm) THINKING ELECTRONIC INDUSTRIAL Co., LTD. All specifications are subject to change without notice. 82 www.thinking.com.tw 2014.05 Ceramic PTC Thermistor: PLA Series Lighting Application Characteristics Part No. Zero-power Curie Withstanding Resistance Temperature Voltage at 25℃ Tc (℃) R25(Ω) VW(Vac) PLA03101□**D2 100 420 PLA03151□**D2 150 420 PLA03221□**D2 220 420 PLA03331□**E0 330 500 PLA03471□**E0 470 500 PLA03681□**E0 680 500 PLA03102□**F0 1000 600 PLA03152□**F0 1500 600 PLA03222□**F0 2200 600 PLA03332□**F0 3300 600 PLA03472□**F0 4700 600 PLA04680□**D2 68 420 PLA04101□**D2 100 420 PLA04151□**D2 150 420 PLA04221□**E0 220 500 PLA04331□**E0 330 500 PLA04471□**F0 470 600 PLA04681□**F0 PLA04102□**F0 PLA04152□**F0 PLA04222□**F0 PLA04332□**F0 (50/60/70/ 80/90/100/ 110/120) ±10 680 600 1000 600 1500 600 2200 600 3300 600 PLA05680□**D2 68 420 PLA05101□**D2 100 420 PLA05151□**D2 150 420 PLA05221□**E0 220 500 PLA05331□**E0 330 500 PLA05471□**F0 470 600 PLA05681□**F0 680 600 PLA05102□**F0 1000 600 PLA05152□**F0 1500 600 PLA05222□**F0 2200 600 PLA05332□**F0 3300 600 PLA06680□**D5 68 450 PLA06101□**E0 100 500 PLA06151□**E0 150 500 PLA06221□**F0 220 600 PLA06331□**F0 330 600 PLA06471□**F0 470 600 Maximum Current Dimensions Imax(mA) D(mm) T(mm) d±0.02(mm) Hmax(mm) 200 3.0~4.5 3.5~4.5 0.5 8.5 300 4.0~5.5 3.5~4.5 0.6 9.5 400 5.0~6.5 3.5~4.5 0.6 10.5 600 5.5~7.5 3.5~4.5 0.6 11.5 Note: 1. □ is the tolerance of R25 2. ** is the code of Tc (Curie temperature) 3. Vw: Withstanding voltage at 50Hz. THINKING ELECTRONIC INDUSTRIAL Co., LTD. All specifications are subject to change without notice. 83 www.thinking.com.tw 2014.05 Ceramic PTC Thermistor: PLA Series Lighting Application Part No. Zero-power Curie Withstanding Resistance Temperature Voltage at 25℃ Tc (℃) R25(Ω) VW(Vac) PLA06681□**F5 680 650 PLA06102□**F5 1000 650 PLA06152□**F5 1500 650 PLA06222□**F5 2200 650 PLA07680□**D5 68 450 100 500 150 500 220 600 PLA07331□**F0 330 600 PLA07471□**F0 470 600 PLA07681□**F5 680 650 PLA07102□**F5 1000 650 PLA07152□**F5 1500 650 PLA07222□**F5 2200 650 PLA07101□**E0 PLA07151□**E0 PLA07221□**F0 (50/60/70/ 80/90/100/ 110/120) ±10 Maximum Current Dimensions Imax(mA) D(mm) T(mm) d±0.02(mm) Hmax(mm) 600 5.5~7.5 3.5~4.5 0.6 11.5 800 6.5~8.5 3.5~4.5 0.6 12.5 Note: 1. □ is the tolerance of R25 2. ** is the code of Tc (Curie temperature) 3. Vw: Withstanding voltage at 50Hz. THINKING ELECTRONIC INDUSTRIAL Co., LTD. All specifications are subject to change without notice. 84 www.thinking.com.tw 2014.05 Ceramic PTC Thermistor: PLA Series Lighting Application Soldering Recommendation Wave Flow Soldering Profile Preheating Soldering Cooling Temperature 260℃ Max Note 2 Note 3 130±20℃ Note 1 Ta 30~90 sec. <1 sec. <10 sec. Time >60sec Note 1. (1~3℃)/sec. 2. Approx. 200℃/sec. 3. 5℃/sec. (Max) Recommended Reworking Conditions With Soldering Iron Item Conditions Temperature of Soldering Iron-tip 360℃ (max.) Soldering Time 3 sec (max.) Distance from Coating 2 mm (min.) THINKING ELECTRONIC INDUSTRIAL Co., LTD. All specifications are subject to change without notice. 85 www.thinking.com.tw 2014.05 Ceramic PTC Thermistor: PLA Series Lighting Application Reliability Test Item Robustness of Terminations Standard Test Conditions and Methods Specifications IEC 60738-1 Gradually apply the specified force and keep the unit fixed for 10±1 sec. Terminal diameter Force (mm) T(N) 0.35<d≦0.5 5.0 0.5<d≦0.8 10.0 0.8<d≦1.25 20.0 ∣△R25/R25∣≦20% No visible damage Solderability IEC 60738-1 245±3 ℃ , 2±0.5 sec At least 95% of terminal electrode is covered by new solder Resistance to Soldering Heat IEC 60738-1 260±3 ℃ , 10±1 sec ∣△R25/R25∣≦20% No visible damage IEC 60738-1 Frequency range:10~55Hz Amplitude: 0.75mm or 98m/s2 Direction: 3 mutually perpendicular directions Duration: 6hrs(3x2 hrs) ∣△R25/R25∣≦20% No visible damage IEC 60738-1 Wave: half-sine ⊿V: 1.0m/s Acceleration: 50 m/s2 Pulse time: 30ms ∣△R25/R25∣≦20% No visible damage Vibration Shock The thermal shock conditions shown below shall be repeated 5 cycles. Rapid Change of Temperature IEC 60738-1 Step 1 2 3 4 Temperature (℃) -40 ± 5 Room temperature 85 ± 5 Room temperature Period (minutes) 30 ± 3 5±3 30 ± 3 5±3 ∣△R25/R25∣≦20% No visible damage Climatic Sequence IEC 60738-1 Dry heat: 125 ℃ for 16 hrs Damp heat first cycle: 40℃, 95% R.H, cycle time: 24 hrs Cold: -25℃ for 2 hrs Damp heat (cyclic), remaining cycles: 5 cycles Test according to IEC60068-2-30 Damp Heat, Steady State IEC 60738-1 40±2℃, 90~95% RH, for 1000±2hrs ∣△R25/R25∣≦20% No visible damage Endurance at maximum operating temperature and maximum voltage IEC60738-1 UCT=60℃, 270Vac, I ≦Imax for 1000±2hrs. ∣△R25/R25∣≦20% No visible damage Endurance at maximum voltage IEC60738-1 25±5℃, 270Vac, I ≦Imax 1min. on and 5min. Off ×10,000 cycles ∣△R25/R25∣≦20% No visible damage THINKING ELECTRONIC INDUSTRIAL Co., LTD. All specifications are subject to change without notice. 86 ∣△R25/R25∣≦20% No visible damage www.thinking.com.tw 2014.05 Ceramic PTC Thermistor: PLA Series Lighting Application Packaging Taping Specification P ∆P ∆ P ∆ h ∆ h H1 W1 W0 P1 L1 W H0 W2 P0 D0 F T (Unit: mm) Parameter List Index Parameter Nominal dimensions Tolerance 5 ±1 F Lead spacing P0 Sprocket hole pitch 12.7 ±0.3 P1 Ordinate to adjacent component lead 3.85 ±1 P Device pitch 12.7 ±1 H0 Abscissa to plane (kinked lead) 16 ±0.5 H1 Abscissa to top W Carrier tape width 18 ±1 W0 Hold-down tape width 12 ±1 W1 Sprocket hole position 9 ±1 W2 Top distance between tape edges 3 Max. △P Body tape plane deviation 1 Max. △h Body lateral deviation 2 Max. 0.5 Max. 4 ±0.2 0.6 ±0.2 D* 3 L1 Lead protrusion D0 Sprocket hole diameter T Tape thickness 4 5 6 7 8 H1 24 25 26 27 28 29 Max. Note: D: Disc diameter THINKING ELECTRONIC INDUSTRIAL Co., LTD. All specifications are subject to change without notice. 87 www.thinking.com.tw 2014.05 Ceramic PTC Thermistor: PLA Series Lighting Application Quantity Bulk Packing: 200pcs per bag Reel Packing: 1,500pcs per reel 31±1 340±10 46±1 (Unit: mm) Ammo packing: 1,000pcs per box 50±5 18 5± 5 348±5 Warehouse Storage Conditions of Products Storage Conditions: 1. Storage Temperature: -10℃~ +40℃ 2. Relative Humidity: ≦75%RH 3. Keep away from corrosive atmosphere and sunlight. Period of Storage:1 year Usage Please keep products away from the conditions mentioned below to avoid their characteristic deterioration and failure. 1. Corrosive gas or deoxidizing gas(Cl2, H2S, NH3, SOx, NOx etc.) 2. Place in a vacuum or put pressure 3. Salt water, oil, solvent and chemical liquid 4. Flammable gas 5. Place in splashed water, or high humidity and dewing place 6. Other places similar to any conditions mentioned above THINKING ELECTRONIC INDUSTRIAL Co., LTD. All specifications are subject to change without notice. 88 www.thinking.com.tw 2014.05