Sixnet Ethernet Series D ATA S H E E T SLX-5EG-2SFP Industrial Ethernet Switch SlimLine Plus Gigabit Industrial Connectivity The 5-port Red Lion Sixnet SLX-5EG-2SFP (2 + 3G) all Gigabit Ethernet switch is designed for exceptional performance and superior reliability in industrial networking environments. Gigabit operation drives ultrafast data throughput and network efficiency. The SLX series features rugged construction optimized for high tolerance to extreme environmental conditions. Convenient plug-and-play capabilities eliminates time-consuming setup and configuration. Ethernet SFP ports for fiber or copper links can be mixed and matched to provide port flexibility. APPLICATION SCENARIO: VIDEO & SECURITY PRODUCT HIGHLIGHTS fully IEEE-compliant Gigabit PoE • 3ports (10/100/1000) • 2 Gigabit SFP ports • High performance and reliability • Industrial-hardened design APPLICATIONS • Video & Security •Transportation • Oil & Gas •Mining •Maritime FEATURES & BENEFITS CONNECT. MONITOR. CONTROL. Real-Time Ethernet Performance Rugged, Reliable Operation • Provides plug-and-play simplicity • Offers ease of use – All Gigabit ports – Flexible fiber configuration via SFP – Auto-sensing for speed and duplex – Auto-MDI/MDIX-crossover works with straight or crossed cables – Auto-polarity corrects for crossed signals – No user configuration required – Dual redundant power inputs • Supports deployment in extreme environments • Provides high reliability in the toughest applications –Ultra-reliable 1,000,000+ hours MTBF –Operating temperature: -40° to +85°C –Rugged corrosion-resistant metal enclosure –Hazardous locations for Class I, Div 2 and Zone 2 SLX-5EG-2SFP Industrial Ethernet Switch SlimLine Plus Gigabit Industrial Connectivity SPECIFICATIONS Ethernet Performance • Type: unmanaged • Operation: store and forward wire-speed switching, non-blocking • Modes: full or half duplex operation with flow control on all ports • MAC addresses: 1,024 • Memory bandwidth: 32 Gbps • Typical latency – 3 μS for 1000 Mbps – 5 μS for 100 Mbps – 16 μS for 10 Mbps • Jumbo frames: up to 10K • Ethernet isolation: 1,500 Vrms 1 minute PoE Output (Ports 1-3) • PoE compliance: 100% IEEE 802.3af compliant • PoE classification: PSE (Power Sourcing Equipment) • PoE voltage: 45 to 48 VDC depending on power input • PoE power: up to 15.4 watts per channel • PoE RJ45: pin assignments TX/V- (3, 6); RX/V+ (1, 2) • PoE operation: automatic detection and power management • PoE disconnect mode: AC disconnect • PoE protection: over-temperature, overcurrent, over/under-voltage and transient Standards & Compliance • Standards: IEEE 802.3, 802.3u, 802.3x RJ45 Copper Ports • Electrical safety: UL508, CSA C22.2/14; • 3 RJ45 ports fully IEEE 802.3 compliant EN61010-1, CE • Speed (10/100/1000) and duplex settings • EMC: FCC part 15, ICES-003; EN610006-2/4, CE (full or half): auto-detecting • Hazardous locations: ISA 12.12.01, CSA C22.2/213 • Auto-MDI/MDIX-crossover automatically supports (Class I, Div 2); EN60079-15 either straight or crossed cables (Zone 2; Category 3), CE (ATEX) • Auto-polarity for automatic correction of • Marine/maritime/offshore compliance crossed TD and RD pairs • NEMA TS-2 for traffic control systems • MTBF: >2MM hours GB @ 40°C per SFP Ports MIL-HNDBK-217F2 • 2 SFP (pluggable) ports accept mini-GBIC • RoHs and WEEE compliant transceivers with speeds up to 1,000 Mbps • See separate datasheet for fiber transceiver Environmental specifications • Operating temperature: -40° to +85°C • Cold startup: -40°C Power Input • Storage temperature: -40° to +85°C • Redundancy: dual power input terminals • Humidity: 5 to 95% RH with reverse polarity protection (non-condensing; conformal coating optional) • Power input • Shock and vibration: IEC60068-2-6 and -27 – 10-44 VDC with no PoE output – 45-56 VDC for PoE output Mechanical • Switch power consumption (without PoE) • Material: corrosion-resistant aluminum – 6.2 W (with 2 fiber) typical • Ingress protection: IP40 – Typical is with all ports active at 1000 Mbps • Mounting: DIN-rail or direct-to-panel • PoE power consumption: up to 15.4 W per port • Weight: 15.2 oz (0.43 kg) • Max. power consumption (with PoE) • Dimensions: 3.82” x 1.77” x 5.26” – 53 W with 3 fully loaded PoE ports (9.71cm x 4.48cm x 13.37cm) • Transient protection: 15,000 watts peak Warranty • Spike protection: 5,000 watts (10 times for 10 μS) • 5 years on design and manufacturing defects About Red Lion As the global experts in communication, monitoring and control for industrial automation, Red Lion has been delivering innovative solutions to customers for forty years. Our award-winning technology enables companies worldwide to gain real-time data visibility that drives productivity. Product brands include Red Lion, Sixnet and N-Tron. With headquarters in York, Pennsylvania, the company has offices across the Americas, Asia-Pacific and Europe. Red Lion is a Spectris company. For more information, visit www.redlion.net/sixnet, call +1 (518) 877-5173 or email [email protected] All specifications are subject to change. Contact Sixnet to learn more. ORDER GUIDE PART NUMBER DESCRIPTION SLX-5EG-2SFP 5 ports, unmanaged 3GE RJ45 PoE + 2 GE SFP ports FMFIBER-SFP-4K 100 Mbps SFP fiber transceiver, multimode, 4 km FSFIBER-SFP-30K 100 Mbps SFP fiber transceiver, singlemode, 30 km FSFIBER-SFP-60K 100 Mbps SFP fiber transceiver, singlemode, 60 km FSFIBER-SFP-100 100 Mbps SFP fiber transceiver, singlemode, 100 km GMFIBER-SFP-500 Gigabit SFP fiber transceiver, multimode, 550 m GMFIBER-SFP-2K Gigabit SFP fiber transceiver, multimode, 2 km GSFIBER-SFP-10K Gigabit SFP fiber transceiver, singlemode, 10 km GSFIBER-SFP-30K Gigabit SFP fiber transceiver, singlemode, 30 km GSFIBER-SFP-50K Gigabit SFP fiber transceiver, singlemode, 50 km GSFIBER-SFP-80K Gigabit SFP fiber transceiver, singlemode, 80 km www.redlion.net/sixnet +1 (518) 877-5173 | [email protected] CONNECT. MONITOR. CONTROL. © 2012 Red Lion Controls. All Rights Reserved. 020813