Product Data Sheet SlimLine Plus Gigabit Industrial Connectivity SLX-8MG Industrial Ethernet Switch The SLX-8MG-1 is an 8 port Gigabit managed industrial Ethernet switch designed to be rugged, reliable and secure. Combining compact DIN-rail packaging and protected circuitry with powerful software, our managed switches keep industrial networks up and running even in the toughest conditions. Product Highlights Overview Industrial Switch Product Highlights 8 Gigabit ports for 10/100/1000 Ethernet links 4 advanced combo ports accept copper RJ45 or noise-immune fiber optic links up to 100+ km Fully managed with advanced features and security Flexible DIN-rail or direct-panel mounting Rugged design supports -40 to 75°C operation To learn more about our SLX-8MG Industrial Ethernet Switches, simply contact [email protected] or call +1 (518) 877-5173. Features Four Flexible Combination Gigabit Ports Your choice – just connect to the RJ45 for a 10/100/1000 Mbps auto-detecting copper link or plug in a fiber transceiver for a 100 or 1000Mbps noise-immune fiber link. These advanced ports give you the flexibility you need and make your job easier! Real-Time Secure Performance Rapid Spanning Tree (RSTP) and Real-Time Ring™ for fast redundant ring or mesh networks SNMPv1 and v2 network management SNMPv3 authentication and encryption for security SNMP notifications (traps) for report on event Priority Queuing (QoS/CoS) for real-time operation IGMP for Multicast filtering (snooping and querying) VLAN for convenient traffic segregation Broadcast and multicast storm protection RMON and port mirroring for advanced diagnostics Security with HTTPS, SSL, SSH, SNMPv3 and more Easy configuration via Web, Telnet or CLI Free firmware upgrades forever Industrial Design UL/CSA (CUL), CE, Hazardous Locations (Zone 2) and Maritime rated Ultra-reliable with 1,000,000+ service-free hours (MTBF) Wide temperature operation -40 to 75°C - No fans! Dual (redundant) power inputs with spike protection Self-test and alarm output contact Rugged corrosion-resistant aluminum packaging DIN-rail or direct-panel mounting in multiple positions To learn more about our SLX-8MG Industrial Ethernet Switches, simply contact [email protected] or call +1 (518) 877-5173. Specs Ethernet Performance Operation: Store and forward, wire-speed switching, non-blocking Modes: Full or half duplex operation with flow control supported on all ports MAC addresses: 8192 Memory bandwidth: 32 Gbps Latency (typical): < 5 us plus frame time Ethernet isolation: 1500 Vrms 1 minute Console ports: USB and RS232 (RJ45) Ethernet Ports RJ45 ports: Eight RJ45 ports that are fully IEEE 802.3 compliant RJ45 speed and duplex: Configurable or 10/100/100 auto-detecting for speed and duplex (full or half) RJ45 MDI / MDIX: Auto-mdi / mdix-crossover automatically supports either straight or crossed cables RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs Four ports are combination Gigabit ports that have both a RJ45 connector and SFP cage. For each of these ports only one connector can be used at a time. SFP (pluggable) ports accept Mini-GBIC (SFP) transceivers with a speed of 1000Mbps or 100Mbps See separate datasheet for optional fiber transceiver specifications Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11 Networking & Management Devices supported: All IEEE 802.3 compliant devices are supported Protocols: SNMPv1 / v2 / v3, RMON, DHCP, SNTP, TFTP, STP, RSTP, QoS / CoS / ToS / DS, IGMPv1 / v2, VLAN (tag and port based), HTTP, HTTPS (SSL and TSL), Telnet, SSH and more Industrial protocols supported: Modbus / TCP, EtherNet / IP, PROFInet, Foundation Fieldbus HSE and others Standards: IEEE 802.3, 802.3u, 802.3x, 802.1D / w, 802.1p, 802.1Q, 802.3ab/z Management interfaces: Text (Telnet and SSH), CLI (command line interface) and SNMP (see the user manual for supported MIBs) Power & Alarm Output Dual redundant power inputs for redundant power supplies Input voltage range: 10 to 30 VDC Power consumption: Typical with all ports linked and active 12 W (with no fiber transceivers) 15 W (with four fiber transceivers) Industrial surge and spike protection: 15 kW peak, 5 kW (10 times for 10 us) Self-test/alarm output: Same voltage as power input 0.5 Amps max. Environmental Operating temperature: -40 to 75°C (cold startup at -40°C) Storage temperature: -40 to 85°C Humidity: 5 to 95% RH (non-condensing) (conformal coating is an available option Vibration and shock: IEC60068-2-6, and -27 Standards & Compliance Electrical safety: UL508, CSA C22.2/14; EN61010-1, CE EMC: FCC part 15, ICES-003; EN55022, EN61000-6-2/4, CE Hazardous locations: UL1604, CSA22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2, Category 3) , CE (ATEX) Marine and offshore rated per ABS RoHS and WEEE compliant NEMA TS-2 for traffic control systems ISO9001:2008 certified company Mechanical Case: Corrosion-resistant aluminum Protection: IP40 protection from dust and debris DIN-rail or direct-panel mounting (no optional kits or accessories required) Dimensions: 2.50" x 5.20" x 3.82" (6.35 x 13.21 x 9.70 cm) Weight:12 oz. (0.34 kg) Specifications are subject to change. Contact Sixnet to learn more. To learn more about our SLX-8MG Industrial Ethernet Switches, simply contact [email protected] or call +1 (518) 877-5173. Mounting This Sixnet exclusive feature allows you to choose the mounting method that best fits your requirements. This capability is a standard feature so no accessories or optional kits are required. Vertical snap-on DIN-rail mounting for quickest installation and optimal rail width utilization. Vertical screw-to-panel mounting for better shock and vibration resistance. Flat screw-to-panel mounting for low profile orientation in shallow boxes plus best shock and vibration resistance. To learn more about our SLX-8MG Industrial Ethernet Switches, simply contact [email protected] or call +1 (518) 877-5173. Order Guide Part Number Description SLX-8MG-1 Industrial switch with 8 Gigabit RJ45 including 4 combo SFP GMFIBER-SFP-500 Gigabit SFP fiber transceiver, mm, 550 m GMFIBER-SFP-2K Gigabit SFP fiber transceiver, mm, 2 km GSFIBER-SFP-10K Gigabit SFP fiber transceiver, sm, 10 km GSFIBER-SFP-30K Gigabit SFP fiber transceiver, sm, 30 km GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50 km GSFIBER-SFP-80K Gigabit SFP fiber transceiver, sm, 80 km FMFIBER-SFP-4K 100Mb SFP fiber transceiver, mm, 4 km FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km FSFIBER-SFP-60K 100Mb SFP fiber transceiver, sm, 60 km FSFIBER-SFP-100 100Mb SFP fiber transceiver, sm, 100 km Note: Special (such as Bi-Di) or extra long haul (up to 120 km) are available special order. Accessories Part Number Description ET-PS-024-02 Power supply – AC to 24VDC, 2A RJ45-DB9F-CBL Console port cable, DB9 to RJ45 To learn more about our SLX-8MG Industrial Ethernet Switches, simply contact [email protected] or call +1 (518) 877-5173.