Industrial Ethernet Switches

331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA
+1 (518) 877-5173 Fax +1 (518) 877-8346
email: [email protected] www.SIXNETio.com
Makes Your Job Easier
Industrial Ethernet Switches
For real-time deterministic performance
●
Real-time 10BaseT/100BaseTx
auto-detection
●
Auto-MDI/MDI-X operation
●
Optional fiber optic ports
●
Industrial rated for -40 to +85 ºC
●
UL 508, CSA, and
rated
DC powered - No bulky adapters
●
DIN rail or direct panel mounting
●
Supports ALL standard
IEEE 802.3 Ethernet protocols
●
5 RJ45 Ports
9 RJ45 Ports
8 RJ45 and 1 Fiber
3 RJ45 and 2 Fiber
4 RJ45 and 1 Fiber
2 RJ45 and 1 Fiber
Interface with
Ethernet devices
Industrial
Work
Station
Ethernet I/O
PC
PLC
Industrial Switches Make Your Job Easier
SIXNET Industrial Ethernet Switches
Eliminate the difficulties often encountered
with installing office-grade devices in
industrial settings. These ruggedized
switches connect to any ethernet
device and provide the important
features you have been looking for.
• Simplify Installation
• Increase Reliability
• Improve Network Bandwidth
• Insure Real-time Operation
• Allow for Deterministic Control
5 RJ45 Ports
Why an Industrial Ethernet Switch?
SIXNET industrial switches are designed for industrial
environments. Their rugged packaging and protected
circuitry keep them working under conditions that
may cause cheap office-grade units to fail. Industrial
applications are demanding - it gets hot, it gets cold the power browns out or spikes wildly - and you
need a reliable industrial switch that can keep on going.
Lose those bulky power transformers
SIXNET industrial switches run directly on the DC
power that you already have in your control cabinet.
Get rid of those cumbersome AC outlet transformers.
No AC power means fewer safety issues. If you ship
your equipment internationally, you can forget about
the headaches caused by different line voltages and
incompatible power plugs.
Why use a switch instead of a hub?
The common ethernet hub simply broadcasts each
message it receives to every one of its ports. Each
ethernet device also has to wait for its turn to ‘talk’ to
the hub, increasing the likelihood of message collisions;
therefore, real-time operation is jeopardized and
determinism is difficult. Alternatively, the SIXNET
industrial ethernet switch automatically determines and
remembers where an ethernet device is located and
routes messages only through the appropriate port. This
minimizes network loading and enables true
deterministic communications over ethernet.
Industrial switch survives heat & cold
SIXNET industrial switches work reliably through
the dead of winter and those hot summer days.
Unlike office-grade switches that are intended only
for use in air conditioned offices, SIXNET industrial
switches are designed for those places that you don’t
want to be-over a temperature range of -40 to 85 oC.
Minimize your wiring headaches
Eliminate unwieldy bundles of ethernet cables by
placing these efficient wiring concentrators right on
the plant floor. Simpler and shorter cabling means
higher reliability, too!
Forget the Velcro and makeshift brackets
SIXNET industrial switches can be DIN rail or
direct panel mounted. Their compact footprint fits
easily into equipment-filled enclosures.
Real-time deterministic performance
SIXNET industrial switches are one of the best and
easiest ways to insure the real-time operation of your
data acquisition and/or control system. With plug
and play ease, simply replace your existing hubs
with these active switches and you’ll immediately
reap the benefits of increased performance. By
eliminating message collision, these switches allow
for true network determinism.
331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA
+1 (518) 877-5173 Fax +1 (518) 877-8346
email: [email protected] www.SIXNETio.com
Performance Specifications
Ethernet switch type
RJ45 ports (shielded)
RJ45 speed (auto-negotiating)
RJ45 auto-mdi/mdi-x
Fiber optic port (dual SC or ST)
Fiber optic port speed
Fiber port wavelength
Optimal fiber multimode (mm)
Optimal fiber singlemode (sm)
Fiber maximum distance
Ethernet protocols supported
Broadcast storm protection
Memory bandwidth
Completely compliant
Full or half duplex operation
MAC addresses supported
Ethernet isolation
Required supply voltage
Power consumption (typical)
Operating and storage temp.
Humidity (non-condensing)
Flammability
Electrical safety
EMI emissions
EMC immunity and surge
withstand
Vibration
Hazardous locations
Eye safety (fiber models)
Mounting Dimensions
Unmanaged, store & forward
10/100BaseT(x)
10 Mbps or 100 Mbps
Most models
Multimode or singlemode
100 Mbps (100BaseFX)
1300 nm center
50/125 um, 62.5/125 um
9/125 um, 10/125 um
2 km (mm), 15 km (sm)
All standard IEEE 802.3
5%(9ES), 25%(5ES) of bandwidth
1 Gbps (3ES), 1.4 Gbps (5ES), 2 Gbps(9ES)
IEEE 802.3, 802.3u, 802.3x
Auto-sensing on RJ45 ports;
Switchable on fiber port
1K (automatic learning, aging,
and migration)
1500 VRMS 1 minute
10-30 VDC
2 W (3ES); 2 W (5ES-1); 3 W (5ES#SC); 4 W (9ES-1); 6 W (9ES-#SC)
-40 to +85 ºC
5 to 95% RH
UL 94V-0 materials
UL 508, CSA C22/14;
EN61010-1 (IEC1010)
FCC part 15, ICES 003,
EN55022, Class B
EN61326-1 (EN61000-42, 3, 4, 5 and 6)
IEC68-2-6
UL 1604, CSA C22.2/213 (Class 1,
Div. 2), Cenelec EN50021 (Zone 2)
IEC60825-1, Class 1; FDA 21
CFR 1040.10 and 1040.11
Ordering Information
Part
Number
ET-GT-3ES-2SC or ST
ET-GT-3ES-3SC or ST
ET-GT-5ES-1
ET-GT-5ES-2SC or ST
ET-GT-5ES-3SC or ST
ET-GT-5ES-4SC or ST
ET-GT-5ES-5SC or ST
ET-GT-9ES-1
ET-GT-9ES-2SC or ST
ET-GT-9ES-3SC or ST
Accessories
RM-PS-024-01F
SP-ETH-2
RJ45 Ports
(10/100 Mbps)
2
2
5
4
4
3
3
9
8
8
Fiber Ports
(100 Mbps)
1 multimode
1 singlemode
n/a
1 multimode
1 singlemode
2 multimode
2 singlemode
n/a
1 multimode
1 singlemode
Max. height off Panel
ET-GT-3ES-xxx: 1.75” (4.45
ET-GT-5ES-1,-2xx,-3xx: 1.75” (4.45
ET-GT-5ES-4xx,-5xx: 2.25’ (5.72
ET-GT-9ES-1;-2xx,-3xx: 2.25” (5.72
cm)
cm)
cm)
cm)
Note: Screw holes are provided as an alternative to DIN rail mounting.
Typical Switch Installation
Main Ethernet Backbone
OFFICE AREA
Office-grade
switch
Industrial switch
FACTORY FLOOR
Ethernet
Control
Cabinet
PLC
Ethernet
I/O
Industrial
Computer
Complete Documentation
is provided on the SIXNET CD or may be
downloaded from www.get2support.com.
Includes applications help for many common
situations.
Contact your SIXNET Applications Engineer today!
For instant availability and
the latest product information check out
Universal AC/DC supply; 24 VDC, 1 AMP
Ethernet surge protector (protects 2 RJ45 ports)
www.industrialmodem.com
NOTE: Each SP-ETH-2 includes a grounding kit and two Ethernet patch cables.
331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA
+1 (518) 877-5173 Fax +1 (518) 877-8346
email: [email protected] www.SIXNETio.com
A Complete Family of I/O Solutions
Ethernet I/O
Ethernet and RS485 I/O
Remote Terminal Unit
SIXNET can provide you the building blocks for
the open systems you are looking for. Three
complementary families of modular DIN rail
mounted I/O provide local, remote, enterprise
level, or Internet I/O solutions.
Ethernet-Ready RTU
VersaTRAK is a versatile RTU with powerful
32-bit programming, discrete and analog I/O,
datalogging and communications, including
support for Ethernet, radios and telephones
integrated into a single compact package.
Industrial Phone Modems
Industrial Modems
SIXNET rugged industrial modems eliminate the
hassles of mounting a telephone modem in an
industrial enclosure. These robust modems are
rated for -30 to +70 ºC industrial operation.
Switch Datasheet REV 0501
TrakPAK Packaged Systems
Contact your SIXNET Applications Engineer today!
SIXNET delivers complete
I/O cabinets that come to you
designed; built; tested; and
ready for installation.
For the latest information, check out
www.SIXNETio.com
331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA
+1 (518) 877-5173 Fax +1 (518) 877-8346
email: [email protected] www.SIXNETio.com