Advanced Information - Preliminary 331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA +1 (518) 877-5173, Fax +1 (518) 877-8346 mailto: [email protected] http://www.sixnetswitch.com Industrial Gigabit Media Converter Supports 10/100/100 Copper and 100/1000 Fiber Connections The SIXNET Gigabit Media Converter is extremely flexible, allowing you to speed up your fast 10 or 100Mb connections to super fast 1000Mb links, or convert between copper and noise immune fiber optic links extending up 120+ km. This advanced media converter utilizes SIXNET switch technology to ensure real-time deterministic performance with plug and play simplicity. This rugged converter is ultra-reliable with over 1,000,000 hours Mean Time Between Failure (MTBF) and protected by SIXNET’s 20-year support and service policy. Fast or Gigabit Fiber Optic Ports Auto-Sensing, Auto-Crossover & Auto-Polarity All the RJ45 copper ports are truly plug and play and will automatically sense the type of cable, cross-wired signals, optimal connection speed and duplex. “No muss, no fuss!” Each Gigabit port supports both 100Mb and 1000Mb fiber connections just by inserting the desired fiber transceiver. Multimode, Singlemode, CWDM, etc. Industry standard SFP (Small Form Pluggable) ports support many types of fiber transceivers for just about any application. Industrial Packaging This converter is ready to snap on your DIN rail or mount directly to any convenient flat surface. No optional accessories required! Auto-Media Detection Each Gigabit port has both a Gigabit RJ45 connector and a SFP pluggable fiber cage. The converter will auto-media detect which one you are using. Ultra Reliability Like all SIXNET industrial Ethernet switches, this converter offers over 1,000,000 hours Mean Time Between Failure (MTBF) based on real-world data. Dual Power Inputs Just connect a secondary power source and you have redundant power protection. Direct 10-30 VDC power! Wide Operating Temperature Ideal for: • Extending your Ethernet runs with noise immune fiber optic cables • Connecting legacy 10/100 devices to your Gigabit network • Adding new Gigabit devices to your existing fast Ethernet network This converter features an operating temperature range of -40 to 85°C. No fans required! Certified to Perform: ISO9001 UL1604 HazLoc European UL508 Safety Marine Emissions COTS Hardware Highlights: Performance Specifications General Ethernet switch type Ethernet protocols supported RJ45 ports (shielded) RJ45 speed (10 or 100 Mbps) RJ45 MDI/MDIX and TD/RD Fiber optic port speed Fiber optic port wavelength Fiber multimode (mm) optimal Fiber singlemode (sm) optimal Fiber max. distance (full duplex) Typ. latency for 100 Mbps ports Full or half duplex operation MAC addresses supported Memory bandwidth Environmental Power input Input power (typical - all ports active at 100 Mbps) (Max. 6 W) Power Input Transient protection Spike Protection Ethernet isolation Operating temperature range Storage temperature range Humidity (non-condensing) Vibration Electrical safety EMI emissions EMC immunity Hazardous locations Marine and off-shore Eye safety (fiber models) Packaging (high temp. Lexan & rust-free aluminum case) Dimensions (L x W x H) 3 Ethernet ports Intelligent store & forward All IEEE 802.3 10/100 or 10/100/1000 Auto-negotiation Auto-crossover and auto-polarity Many available – varies w/ xcvr Many available – varies w/ xcvr 62.5/125 um typical 9/125 um typical Up to 120+ km Varies on load 5 us + frame time Automatic 8192 32 Gbps DIN rail or direct panel mounting Redundant input terminals 3.0 W (model -1 without fiber) 5.0 W (model with 1 fiber) 7.0 W (model with 2 fiber) 10-30 VDC 15,000 watts peak 5,000 watts (10 times for 10 uS) 1500 VRMS 1 minute -40 to +85 °C -40 to +85 °C 5 to 95% RH IEC68-2-6 UL508/CSA C22, EN61010-1 FCC part 15, ICES-003, EN55022 IEC61326-1 UL1604, CSA C22.2/213 (Class 1, Div. 2), Cenelec EN50021 (Zone 2) DNV (Det Norske Veritas) IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11 IP20 protection; UL 94V-0 3 port truly industrial Ethernet media converter with 2 Gigabit copper or fiber optic ports (SFP pluggable) Redundant power inputs and surge protection Industrial rated -40 to +85 °C operation (without fans!) UL/CSA, CE and Zone 2 rated for hazardous locations DNV tested for marine and off-shore use DIN rail or direct panel mounting (no extra kits required) Networking Features: Store and forward wire speed switching – no delays Support for up to 8192 MAC addresses Automatic address learning, aging and migration Full-Duplex operation with flow control (no collisions!) Auto crossover (MDI/MDIX) and auto polarity Ethernet Compliance: IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3u (Fast Ethernet 100Mbps for newer devices) IEEE 802.3x (Full-Duplex with Flow Control) Typical Converter Applications: See next page Specifications are subject to change. Consult factory for latest information. Ordering Guide ET-3EG-1 1 = 3 RJ45 ports & no fiber transceivers MX = Includes 1 multimode LC fiber xcvr SX = Incl. 1 singlemode LC fiber xcvr MM = Incl. 2 multimode LC fiber xcvrs SS = Incl. 2 singlemode LC fiber xcvrs RM-PS-024-01F SP-ETH-2 3EG – 3 port Ethernet with Gigabit ET = EtherTRAK Family Accessories: Power supply – AC to 24VDC, 1A Dual port 10/100 lightning protector Advanced Information - Preliminary 331 Ushers Road, P.O. Box 767 y Clifton Park, NY 12065 USA y +1 (518) 877-5173 Fax +1 (518) 877-8346 y mailto: [email protected] y http://www.sixnetswitch.com Mechanical and Mounting Dimensions 0.28" [0.70 cm] 0.60" [1.52 cm] (typical for SFP fiber) 3.17" [8.05 cm] 2.94" [7.45 cm] DIN EN 50022 (not included) Front View 1.60" [4.07 cm] 0.24" [0.60 cm] ET-3EG 0.17" [0.43] (clear for #8 screw) 4.48" [11.37 cm] 4.75" [12.07 cm] Side View B 1.38" [3.5 cm] DIN EN50022 (not included with units; not shown to scale; for reference only) *** Preliminary *** A=1.50" [3.81 cm] B=0.35" [0.89 cm] A 0.11" [0.28 cm] 0.20" [0.51 cm] 0.30" [0.76 cm] 1.06" [2.7 cm] Typical Power Wiring Single DC Power Redundant DC Power P1 P2 P1 P2 To Panel To Panel + - + - + - VDC Supply Dual VDC Supplies Advanced Information - Preliminary 331 Ushers Road, P.O. Box 767 y Clifton Park, NY 12065 USA y +1 (518) 877-5173 Fax +1 (518) 877-8346 y mailto: [email protected] y http://www.sixnetswitch.com A AC Coom mpplleettee F Faam miillyy ooff II//O O SSoolluuttiioonnss Ethernet and RS485 I/O SIXNET can provide you the building blocks for the open systems you are looking for. Three complementary families of modular DIN rail mounted I/O provide local, remote, enterprise level, or Internet I/O solutions. Industrial Telephone Modems SIXNET rugged industrial modems eliminate the hassles of mounting a telephone modem in an industrial enclosure. These robust modems are rated for -30 to +70 ºC industrial operation. Industrial Ethernet Managed Switches SIXNET Industrial Ethernet Switches offer the most advanced features, from Rapid Spanning Tree Protocol for redundancy, to SNMP for easy network management. These switches are rugged, reliable, real-time and most of all, secure. Controllers & RTUs with Open-Source Linux SIXNET IPm is a combination of installation-ready industrial controllers & RTUs and a wealth of powerful software solutions. IPm offers the reliability of a PLC, the familiarity of powerful Windows programming and configuration utilities, all combined with powerful open-source Linux flexibility. Contact your SIXNET Applications Engineer Today! For the latest information, check out http://www.sixnetswitch.com Advanced Information - Preliminary 331 Ushers Road, P.O. Box 767 y Clifton Park, NY 12065 USA y +1 (518) 877-5173 Fax +1 (518) 877-8346 y mailto: [email protected] y http://www.sixnetswitch.com Gigabit Converter Datasheet - Rev 9-Nov-06 Request Your FREE Product CD at http://www.sixnetswitch.com