UM3730 150mA, Micropower, Low Dropout Linear Regulator UM3730DA-xx DFN4 1.0×1.0 UM3730P-xx SOT353 General Description The UM3730 series are low dropout linear regulators designed for low power portable applications. Typical output noise is only 220μVRMS and typical dropout voltage is 155mV at the load current of 150mA. Ideal for battery powered applications, the UM3730 draws only 29μA current during no load operation. The UM3730 includes an auto-discharge feature that is activated when the enable pin is low. Other features include 2% output voltage accuracy, excellent transient response, stability with ultra low ESR ceramic capacitors as small as 1μF, thermal overload protection and output current limiting. The UM3730 series are available in low profile DFN4 1.0×1.0 and SOT353 packages. Applications Features Digital Camera PDAs and Notebook Computers Portable Instruments and Battery-Powered Systems Cellular Phones Input Voltage Range: 2.5V to 5.5V Guaranteed 150mA Output Current ±2% Voltage Accuracy at 150mA Low Dropout Voltage: 155mV(Typical) at 150mA Low Quiescent Current: 29μA(Typical) Low Noise: 220μVRMS (10Hz to 100kHz) Available Fixed Output Voltage from 1.0V to 3.3V with 0.1V Step Output Current Limit Thermal Overload Protection Stable with 1μF Output Capacitor Low Profile DFN4 1.0×1.0 and SOT353 Packages Typical Application Circuit UM3730 VIN VOUT VIN VOUT 1uF Chip Enable 1uF EN GND ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 1/11 UM3730 Pin Configurations Top View VIN 4 EN 3 XX M (Top View) EP 2 GND M: Month Code UM3730DA-xx DFN4 1.0×1.0 4 5 IN 1 GND 2 EN 3 5 OUT 4 NC XXX 2 1 M 1 VOUT 3 M: Month Code UM3730P-xx SOT353 Pin Description Pin Number Pin Name DFN4 1.0×1.0 Pin Name SOT353 1 VOUT - 1 - IN 2 GND GND 3 EN EN 4 VIN - Supply Input 4 - NC No connect. 5 - OUT EP HS Pad - Pin Function Output Voltage Supply Input Ground Enable Input: Active High. High=ON, Low=Off Output Voltage Exposed Heat Sink Pad ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 2/11 UM3730 Naming Information UM3730 Output Voltage 10: 1.0V 11: 1.1V 12: 1.2V …… 33: 3.3V Package Type DA: DFN4 1.0×1.0 P: SOT353 Available Voltage Version Part Number UM3730DA-10 UM3730DA-11 UM3730DA-12 UM3730DA-13 UM3730DA-14 UM3730DA-15 UM3730DA-16 UM3730DA-17 UM3730DA-18 UM3730DA-19 UM3730DA-20 UM3730DA-21 UM3730DA-22 UM3730DA-23 UM3730DA-24 UM3730DA-25 UM3730DA-26 UM3730DA-27 UM3730DA-28 UM3730DA-29 UM3730DA-30 UM3730DA-31 UM3730DA-32 UM3730DA-33 Output Voltage 1.0V 1.1V 1.2V 1.3V 1.4V 1.5V 1.6V 1.7V 1.8V 1.9V 2.0V 2.1V 2.2V 2.3V 2.4V 2.5V 2.6V 2.7V 2.8V 2.9V 3.0V 3.1V 3.2V 3.3V Packaging Type DFN4 1.0×1.0 Marking Code JA JB J2 J3 J4 J5 J6 J7 J8 J9 JC KB K2 K3 K4 K5 K6 K7 K8 K9 KC NB N2 N3 Shipping Qty 3000pcs/7Inch Tape & Reel ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 3/11 UM3730 Available Voltage Version (Continued) Part Number UM3730P-10 UM3730P-11 UM3730P-12 UM3730P-13 UM3730P-14 UM3730P-15 UM3730P-16 UM3730P-17 UM3730P-18 UM3730P-19 UM3730P-20 UM3730P-21 UM3730P-22 UM3730P-23 UM3730P-24 UM3730P-25 UM3730P-26 UM3730P-27 UM3730P-28 UM3730P-29 UM3730P-30 UM3730P-31 UM3730P-32 UM3730P-33 Output Voltage 1.0V 1.1V 1.2V 1.3V 1.4V 1.5V 1.6V 1.7V 1.8V 1.9V 2.0V 2.1V 2.2V 2.3V 2.4V 2.5V 2.6V 2.7V 2.8V 2.9V 3.0V 3.1V 3.2V 3.3V Packaging Type SOT353 Marking Code UJA UJB UJ2 UJ3 UJ4 UJ5 UJ6 UJ7 UJ8 UJ9 UJC UKB UK2 UK3 UK4 UK5 UK6 UK7 UK8 UK9 UKC UNB UN2 UN3 Shipping Qty 3000pcs/7Inch Tape & Reel Absolute Maximum Ratings (Note 1) Symbol VIN VOUT TJ TSTG TL θJA (Notes 4) Parameter Value Unit Supply Voltage on VIN Pin -0.3 to +7.5 V Voltage on VOUT Pin -0.3 to +7.5 V Operating Junction Temperature (Notes 2, 3) -40 to +125 °C Storage Temperature Range -55 to +150 °C +260 °C Lead Temperature for Soldering 10 seconds Package Thermal Resistance DFN4 1.0×1.0 250 °C/W SOT353 256 Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: The UM3730 is tested and specified under pulse load conditions such that TJ≈TA. Specifications over the –40°C to 125°C operating junction temperature range are assured by design, characterization and correlation with statistical process controls. Note 3: This IC includes over temperature protection that is intended to protect the device during momentary overload conditions. Note 4: The maximum allowable power dissipation of any TA(ambient temperature) is PDMAX = (TJMAX TA)/ θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature and the regulator will go into thermal shutdown. ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 4/11 UM3730 Electrical Characteristics VIN=VEN=VOUT+1V, CIN=COUT=1μF, TA=25°C. Symbol VIN VOUT IQ ISHDN IEN IOUT ΔVDO ILIMT t VIL VIH TSHDN ΔTSHDN Parameter Input Voltage Range Output Voltage Range Operating Quiescent Current Shutdown Leakage Current Enable Input Current Output Current Output Voltage Accuracy Dropout Voltage Output Current Limit Startup Time Response Enable Input Low Voltage Enable Input High Voltage Output Voltage TC Thermal-Shutdown Temperature Thermal-Shutdown Hysteresis LNR Line Regulation LDR Load Regulation Output Voltage Noise PSRR Power Supply Ripple Rejection Auto-Discharge Resistance Test Conditions Min 2.5 Typ 1.0 IOUT=0mA 29 VEN=VIN or GND Max 5.5 Unit V 3.3 V 39 μA 1 μA 1 μA 150 IOUT=150mA -2.0 IOUT=50mA, VOUT≥2.8V IOUT=150mA, VOUT≥2.8V IOUT=50mA, VOUT <2.8V IOUT=150mA, VOUT <2.8V VOUT =0V mA 200 IOUT=150mA, COUT=1μF +2.0 % 55 155 60 180 110 310 135 380 mV mV mV mV 325 500 mA VIN=2.5V to5.5V VIN=2.5V to5.5V VOUT+1V≤VIN≤5.5V (VIN≥2.5V) IOUT=10mA VIN=VOUT+1V (VIN≥2.5V) 1mA≤IOUT≤150mA VOUT=1.8V, 10Hz to 100kHz CIN=1μF, IOUT=100mA VIN=VOUT+1V (VIN≥2.5V) IOUT=100mA f=1kHz μs 30 0.4 1.2 V V 100 ppm/°C 160 °C 20 °C 0.1 0.3 %/V 0.8 1.5 % 220 μVRMS 45 dB f=10kHz VIN=3.6V, VEN=0V 30 10 Ω ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 5/11 UM3730 Typical Performance Characteristics Quiescent Current vs Input Voltage IOUT=0mA Quiescent Current vs Temperature VIN=2.8V, IOUT=0mA Ground Current vs Output Current VIN=2.8V Output Voltage vs Input Voltage IOUT=150mA Output Voltage vs Output Current VIN=2.8V Output Voltage vs Temperature VIN=2.8V, IOUT=1mA ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 6/11 UM3730 Typical Performance Characteristics (Continued) Dropout Voltage vs Output Current VOUT=1.8V Enable Logic Threshold vs Supply Voltage VIH VIL PSRR vs Frequency Noise VOUT=1.8V, VIN=2.8V, IOUT=100mA, CIN=COUT=1μF 220μVrms IOUT=50mA IOUT=150mA Noise (500μV/div) Load Transient Response IOUT=10 to 150mA (50mA/div) VOUT (50mV/div) VOUT=1.8V, VIN=2.8V, 50μs/div Time, 50ms/div f=10Hz to 100kHz Line Transient Response VIN =2.8 to 3.8V (1V/div) VOUT (100mV/div) VOUT=1.8V, IOUT=150mA, 20μs/div ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 7/11 UM3730 Typical Performance Characteristics (Continued) Enable Turn-On VEN (1V/div) Auto Discharge (No Load) VEN (2V/div) VOUT (1V/div) VOUT=1.8V, VIN =2.8V, RL=68Ω 20μs/div VOUT (1V/div) VOUT=1.8V, VIN=3.6V 20μs/div ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 8/11 UM3730 Package Information UM3730DA-xx DFN4 1.0×1.0 Outline Drawing D b Symbol A A1 A3 b D E D2 E2 e L L1 L2 Z E D 2 L1 Pin #1 ID L E2 L2 e Z A3 A1 A Bottom View Side View DIMENSIONS MILLIMETERS Min Typ Max 0.39 0.40 0 0.02 0.05 0.13 0.20 0.25 0.30 0.95 1.00 1.05 0.95 1.00 1.05 0.38 0.48 0.58 0.38 0.48 0.58 0.65BSC 0.20 0.25 0.30 0.27 0.32 0.37 0.02 0.07 0.12 0.05 - Land Pattern 0. 0.25 0. 48 0.22 0.47 1.30 0.40 48 0.65 NOTES: 1. Compound dimension: 1.00×1.00; 2. Unit: mm; 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. Tape and Reel Orientation XX M ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 9/11 UM3730 UM3730P-xx SOT353 Outline Drawing Symbol D θ L e1 4 2 3 L1 1 E E1 5 b 20 c e Top View A A1 A2 End View Side View A A1 A2 b c D E E1 e e1 L L1 θ DIMENSIONS MILLIMETERS Min Max 0.900 1.100 0.000 0.100 0.877 1.000 0.150 0.350 0.080 0.220 1.800 2.200 1.150 1.350 2.000 2.450 0.650REF 1.200 1.400 0.488REF 0.260 0.460 0° 8° INCHES Min Max 0.035 0.043 0.000 0.004 0.035 0.039 0.006 0.014 0.003 0.009 0.071 0.087 0.045 0.053 0.079 0.096 0.026REF 0.047 0.055 0.020REF 0.010 0.018 0° 8° Land Pattern 1.94 1.30 0.80 NOTES: 1. Compound dimension: 2.00×1.25; 2. Unit: mm; 3. General tolerance ±0.05mm unless otherwise specified; 4. The layout is just for reference. 0.35 XXX M Tape and Reel Orientation ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 10/11 UM3730 GREEN COMPLIANCE Union Semiconductor is committed to environmental excellence in all aspects of its operations including meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Union components are compliant with the RoHS directive, which helps to support customers in their compliance with environmental directives. For more green compliance information, please visit: http://www.union-ic.com/index.aspx?cat_code=RoHSDeclaration IMPORTANT NOTICE The information in this document has been carefully reviewed and is believed to be accurate. Nonetheless, this document is subject to change without notice. Union assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the contained information, or to notify a person or organization of any update. Union reserves the right to make changes, at any time, in order to improve reliability, function or design and to attempt to supply the best product possible. Union Semiconductor, Inc Add: Unit 606, No.570 Shengxia Road, Shanghai 201210 Tel: 021-51093966 Fax: 021-51026018 Website: www.union-ic.com ________________________________________________________________________ http://www.union-ic.com Rev.03 May.2015 11/11