Pomona® Model 5079 & Assembly Instructions BNC Cable Plug, Male, 75 Ohms FEATURES: • Connector to accept cable RG-59/U, 59A/U, 59B/U, 62/U, 62A/U, 62B/U, 62C/U, 210/U MATERIALS: Body and Fitting: Brass per QQ-B-626, Alloy 360, ½ Hard Outer Contact: Beryllium Copper per QQ-C-530, Cond. H.T. Center Contact: Gold Plated Brass per QQ-B-626, Alloy 360, ½ Hard Dielectric: PTFE Vee Gasket: Silicone rubber per ZZ-R-765, Class 11A, Grade 50 Finish: Body and Fittings – Tarnish Resistant Outer Contact – Tarnish Resistant Center Contact – Gold Plated per MIL-C-39012 RATINGS: Operating Voltage: 500 VRMS Max. Nominal Impedance: 75 Ohms ORDERING INFORMATION: Model 5079 All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d_AI_5079_2_01.doc PomonaACCESS 90114 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 2 Pomona® Model 5079 & Assembly Instructions BNC Cable Plug, Male, 75 Ohms FIGURE #1 A. Strip cable jacket and braid and dielectric to dimensions shown. FIGURE #2 B. Slide clamp nut, flat washer and gasket over end of cable. C. Fray cable braid and slide braid clamp over end of cable flush with end of cable jacket. FIGURE #3 D. Solder or crimp contact onto center conductor. E. Fold braid back over braid clamp and trim even with braid clamp. FIGURE #4 F. Slide clamp nut, flat washer and gasket forward against braid clamp. G. Thread body onto clamp nut and tighten 35-40 inch-pounds. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 S:\Engineering \Release\DataSheets\FlukeDataSheet\d_AI_5079_2_01.doc PomonaACCESS 90114 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 2 of 2