Model 1756 Shielded Low Voltage Spade Lug Patch Cord Features Pomona’s Model 1756 is part of a family of test accessories ideal for low voltage precision measurements. Spade lugs are of high conductivity, gold plated ETP copper alloy 110, to greatly minimize the effects of Thermal Electric Voltage (Thermal EMF). Thermal EMF is generated at the junction of dissimilar metals at different temperatures and is a common source of error in low micro and nano volt measurements. In addition, low Thermal EMF spade lugs are attached to the wire shield to lessen interference, interaction, or leakage which might affect the accuracy of your precision voltage measurement. Materials Spade Lugs: Cable: Shield Lead: ETP (Electrolytic Tough Pitch) 110 Copper Alloy, ½ Hard, Gold Plated Insulation: Polypropylene, molded to spade lug body and wire. Color: Red and Black Marking: “POMONA ELECTRONICS CALIF” 12 AWG; Stranding 7 x 38/36 Bare Copper, Braided Bare Copper Shield Inner Insulation: Natural Polyethylene, O.D. .153” (3,89mm) Outer Jacket: PVC, Color: Black, O.D. .246” (6,25mm) Marking: “POMONA 1756-XX” 18 AWG, Stranding 65 x 36 t.c., PVC Insulated, O.D. .144” (3,66mm) Ratings Voltage: For CE compliance and for personal safety, do not hold in hand when voltages exceed 30 Vrms/60 Vdc. Maximum voltage for hands free use in controlled testing environments: 2000 Vrms Max. Do not use on circuits where transient stresses can exceed the rated voltage. Temperature: +55°C (+131°F) Max. Current: 20 Amperes Max. Ordering Information Model 1756-XX XX = Lead Length in Inches, Standard Length: 24” (60,96cm) & 48” (121,92cm) Additional lengths can be quoted upon request. USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2012 D1093779 Rev. 100 Page 1 of 1