Model 1167 Two Conductor Shielded Balanced line Patch Cable FEATURES: Cable is ideal in audio applications where a low impedance shielded balance line is desired. Banana plugs feature Beryllium Copper springs for long insertion life & can be stacked horizontally/vertically. Banana plugs are molded directly to the cable and wires for robust pull strength. MATERIALS: Banana Plugs (Single and Double): Body: Nickel Plated Brass Spring: Nickel Plated Beryllium Copper Insulation: Polypropylene, Color: Double – Gray, Single – Green Two Conductors, Shielded Microphone Type Cable: Two Conductors: 22 AWG, Standing 16 x 34 t.c. Shield: Braided Tinned Copper Jacket: PVC, O.D. .231” (5,87mm) Nom., Color: Gray Shield Leads: 20 AWG, Stranding 41 x 36 t.c., PVC Insulated .087” (2,21mm) O.D., Color: Green RATINGS: Operating Voltage: Hands free usage in controlled voltage environments: 1000 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. Operating Temperature: +131°F (+55°C) ORDERING INFORMATION: Model 1167-Length Length =: 18” (45,72cm), 24” (60,96cm), 30” (76,20cm), 36” (91,44cm), 48” (121,92cm), 60” (152.40cm). For custom lengths, contact Sales or send email request to: [email protected]. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1093623 Page 1 of 1