Model 5907A, 5908A & 5909A Flexible DMM Test Lead Set with Sheathed Style Banana Plugs FEATURES: Flexible test lead sets are a perfect interface for multimeters configured with 4 mm sheathed safety jacks. Test leads comply with IEC 1010-2-031. Plug and housing are molded directly to the cable in an integral one piece design and the wire is double crimped for a long lasting connection. Multi-leaf banana spring is beryllium copper, nickel plated for extended insertion cycle life and low contact resistance. High strand count silicone insulated wire offers excellent flexibility and high temperature resistance. Test leads can mate to a broad assortment of Pomona test probes, alligators, spade lugs, etc. MATERIALS: Plug: Brass, Nickel plated Spring: Beryllium Copper, Nickel plated Insulator: Santoprene Wire: 18 AWG Wire Insulation: Silicone, O.D. 0.144” Nom. RATINGS: IEC 1010 2-031, Category III, P2 Compliant Operating Temperature: -4° to +131°F (-20 to +55°C) Operating Voltage: 1,000 VRMS/DC Max. Current: 10 Amperes Max. ORDERING INFORMATION: Standard length is 48” (121,9cm)* Model: 5907A (set includes one red and one black lead - ideal for hand-held multimeters) Model: 5908A (set includes one red and one black lead - ideal for bench multimeters) Model: 5909A (set includes one red and one black lead - ideal for special right angle access applications) * For custom lengths, contact Technical Support at [email protected]. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094580, D1094581, D1094582 Page 1 of 2 Model 5907A, 5908A & 5909A Flexible DMM Test Lead Set with Sheathed Style Banana Plugs All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094580, D1094581, D1094582 Page 2 of 2