BL8070 6V High Speed INVERTER DESCRIPTION FEATURES BL8070 is CMOS single inverter gate. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 6.0V VCC range. Inputs tolerate voltage up to 6V independent of VCC operating voltage. FUNCTION DIAGRAM Space saving 5-lead surface mount SC70 Package and 1x1mm DFN package Ultra High Speed; TPD 8.5 ns Typ into 50 pF at 5V VCC High Output Drive; ±16 mA at 5V VCC Broad VCC Operating Range; 1.65V to 6.0V Low Power Consumption, 1μA Max ICC Schmitt Trigger Action at input makes the circuit tolerant for slower input rise and fall time APPLICATIONS Cell phone and other portable device 3G module ORDERING INFORMATION / PIN CONFIGURATION / MARKING Ordering Part No. Package BL8070CA5TR SC70-5 Pin Out OCYW 1Y BL8070CKDTR BL8070CKDTR Marking DFN1x1-5L 5. Vcc OC YW 2 Gnd 3A 4. NC 1Y 4 Vcc OC YW DFN1x1-4L 2 Gnd 3A YW:Date Code www.belling.com.cn 1 BL8070 ABSOLUTE MAXIMUM RATING Parameter Supply voltage range Input voltage range Output voltage range DC Input Diode Current DC Output Diode Current DC Output Current Storage Temperature Range Package Power Dissipation @ +70°C Symbol VCC VIN VOUT IIK IOK IOL/IOH Tstg Pd Limit Unit -0.5~7 V ±20 mA ±25 -40 to 150 200 C mW Limit 252 206 142 Unit THERMAL RESISTANCE RATING Parameter Package thermal impedance Device SOT23-5-1.7 SO23-5-1.3 SC70-5 Symbol θJA C /W RECOMMENDED OPERATING CONDITION Tj=25C Parameter Symbol VCC VIN VOUT Supply voltage Input voltage Output voltage VCC = 3 V VIH VCC = 6 V High-level output current Low-level output current VCC = 3 V VIL 0 VCC VCC 0 1.8 3.2 1.0 2.2 -50 IOH VCC = 3.3±0.3 V -8 VCC = 6±0.5 V -16 VCC = 2 V 50 IOL VCC = 3.3±0.3 V VCC = 3.3±0.3 V VCC = 6±0.5 V Unit V VCC = 2 V 8 16 Δt/Δv Operation Temperature www.belling.com.cn 6 VCC = 6 V VCC = 6±0.5 V Input transition rise or fall rate 1.65 0.7 VCC = 2 V Low-level input voltage Max. 1.3 VCC = 2 V High-level input voltage Min. TA 2 100 20 -40 to 85 μ A mA μ A mA ns/V C BL8070 ELECTRICAL CHARACTERISTICS (unless otherwise noted) Parameter II ICC Ci Test condition VI = 6.0 V or GND VI = VCC or GND, IO = 0 VI = VCC or GND Vcc Min. Max. 0 V to 6.0 V ±1 6.0V 5.0V 2.0V 3.0V 5.0V 3.0V 5.0V 2.0V 3.0V 5.0V 3.0V 5.0V 1 10 IOH = −50μ A VOH IOH = −8 mA IOH = −16 mA IOH = −50μ A VOL IOH = −8 mA IOH = −16 mA 1.9 2.9 4.9 2.6 4.5 0.1 0.1 0.1 0.4 0.5 Unit μ A μ A pF V SWITCHING CHARACTERISTICS(VCC = 3.3 V ± 0.3 V) Parameter tPLH tPHL tPLH tPHL Input Output Load capacitance A Y CL = 15 pF A Y CL = 50pF Min. 1 1 1 1 Max. 8.5 8.5 12 12 Unit Min. 1 1 1 1 Max. 6.5 6.5 8.5 8.5 Unit TYP. 12 Unit pF ns SWITCHING CHARACTERISTICS(VCC = 6.0 V ± 0.5 V) Parameter tPLH tPHL tPLH tPHL Input Output Load capacitance A Y CL = 15 pF A Y CL = 50pF ns OPERATING CHARACTERISTICS, VCC = 5 V, TA = 25C Symbol Cpd www.belling.com.cn Parameter Power dissipation capacitance Test condition No load, f = 1 MHz 3 BL8070 PARAMETER MEASUREMENT INFORMATION VCC Output Input CL Note: A. The outputs are measured one at a time, with one input transition per measurement. B. All parameters and waveforms are not applicable to all devices. C. CL includes probe and jig capacitance D. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. www.belling.com.cn 4 BL8070 PACKAGE OUTLINE Package SC70-5 Devices per reel 3000 Unit mm Devices per reel 5000 Unit mm Package specification: Package DFN1x1-5L Package specification: www.belling.com.cn 5 BL8070 Package DFN1x1-4L Devices per reel Package specification: www.belling.com.cn 6 5000 Unit mm