74ACT04 HEX INVERTER ■ ■ ■ ■ ■ ■ ■ ■ ■ HIGH SPEED: tPD = 4.5 ns (TYP.) at VCC = 3.3V LOW POWER DISSIPATION: ICC = 4 µA (MAX.) at TA = 25 oC COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN), VIL = 0.8V (MAX) 50Ω TRANSMISSION LINE DRIVING CAPABILITY SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 4.5V to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 04 IMPROVED LATCH-UP IMMUNITY DESCRIPTION The ACT04 is an advanced high-speed CMOS HEX INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power applications mantaining high speed operation similar to B M (Plastic Package) (Micro Package) ORDER CODES : 74ACT04B 74ACT04M equivalent Bipolar Schottky TTL. The internal circuit is composed of 3 stages including buffer output, which enables high noise immunity and stabe output. The device is designed to interface directly High Speed CMOS systems with TTL, NMOS and CMOS output voltage levels. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage. PIN CONNECTION AND IEC LOGIC SYMBOLS April 1997 1/7 74ACT04 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL 1, 3, 5, 9, 11, 13 1A to 6A Data Inputs NAME AND F UNCTIO N 2, 4, 6, 8, 10, 12 1Y to 6Y Data Oututs 7 GND Ground (0V) 14 VCC Positive Supply Voltage TRUTH TABLE A Y L H H L ABSOLUTE MAXIMUM RATINGS Symbol Parameter Unit -0.5 to +7 V VI DC Input Voltage -0.5 to VCC + 0.5 V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK DC Input Diode Current ± 20 mA IOK DC Output Diode Current ± 20 mA IO DC Output Current ± 50 mA ± 300 mA VCC Supply Voltage Value ICC or IGND DC VCC or Ground Current Tstg Storage Temperature TL Lead Temperature (10 sec) -65 to +150 o C 300 o C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. RECOMMENDED OPERATING CONDITIONS Symbol Valu e Unit Supply Voltage 4.5 to 5.5 V VI Input Voltage 0 to VCC V VO Output Voltage 0 to VCC VCC Top dt/dv Parameter Operating Temperature: Input Rise and Fall Time VCC = 4.5 to 5.5V (note 1) 1) VIN from 0.8 V to 2.0 V 2/7 -40 to +85 8 V o C ns/V 74ACT04 DC SPECIFICATIONS Symbol Parameter Test Con dition s VIH High Level Input Voltage 4.5 VO = 0.1 V or VCC - 0.1 V 5.5 VIL Low Level Input Voltage 4.5 High Level Output Voltage 4.5 (*) VI = V IH or V IL 5.5 Low Level Output Voltage Max. Min . 2.0 2.0 1.5 2.0 Max. V 1.5 0.8 0.8 1.5 0.8 0.8 IO=-50 µA 4.4 4.49 4.4 IO=-50 µA 5.4 5.49 5.4 3.86 4.86 4.5 IO=50 µA 0.001 0.1 0.1 IO=50 mA 0.001 0.1 0.1 IO=24 mA 0.36 0.44 IO=24 mA 0.36 0.44 ±0.1 ±1 V I (*) = V IH or V IL 5.5 Input Leakage Current 5.5 ICCT Max ICC /Input 5.5 VI = VCC -2.1 V ICC Quiescent Supply Current 5.5 VI = VCC or GND IOLD Dynamic Output Current (note 1, 2) 5.5 V V IO=-24 mA 5.5 IOHD 1.5 IO=-24 mA 4.5 II Typ. 2.0 5.5 4.5 VOL Unit -40 to 85 o C Min. VO = 0.1 V or VCC - 0.1 V 5.5 VOH Value T A = 25 oC V CC (V) 3.76 4.76 VI = VCC or GND 0.6 V µA 1.5 mA 40 mA VOLD = 1.65 V max 75 mA VOHD = 3.85 V min -75 mA 4 1) Maximum test duration 2ms, one output loaded at time 2) Incident wave switching is guaranteed on transmission lines with impedances as low as 50 Ω. (*) All outputs loaded. AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 Ω, Input tr = t f =3 ns) Symbol Parameter T est Cond ition V CC (V) tPLH tPHL Propagation Delay Time 5.0(*) Value T A = 25 oC -40 to 85 o C Min. 1.5 Typ. 4.5 Max. 7.5 Min . 1.0 Max. 8.5 Unit ns (*) Voltage range is 5V ± 0.5V CAPACITIVE CHARACTERISTICS Symbol Parameter Test Con dition s V CC (V) Value o T A = 25 C Min. Typ. Max. Unit o -40 to 85 C Min . Max. CIN Input Capacitance 5.0 4 pF C PD Power Dissipation Capacitance (note 1) 5.0 37 pF 1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD • VCC • fIN + ICC/n (per circuit) 3/7 74ACT04 TEST CIRCUIT CL = 50 pF or equivalent (includes jig and probe capacitance) RL = R1 = 500Ω or equivalent RT =ZOUT of pulse generator (typically 50Ω) WAVEFORM: PROPAGATION DELAYS (f=1MHz) 4/7 74ACT04 Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 5/7 74ACT04 SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8 (max.) P013G 6/7 74ACT04 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1997 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 7/7