Radial Leaded PTC FUZETEC

Radial Leaded PTC Resettable Fuse: FRT 135-33F
1. Summary
(a) RoHS Compliant (Lead Free) Product
(b) Applications: IEEE 1394 FireWire, Computers & Consumer electronics
(c) Product Features: Fast trip time, Lower Trip-to-hold Ratio, Radial-leaded product
ideal for up to 36V
(d) Operation Current: 1.35A
(e) Maximum Voltage: 36V
(f) Temperature Range : -40℃ to 85℃
2. Agency Recognition
UL:
E211981
C-UL: E211981
TUV : R50004084
3. Electrical Characteristics (23℃)
Part
Number
FRT135-33F
Hold
Trip
Maximum
Current Current Current
IH,A
1.35
IT,A
2.50
IMAX,A
40
Rated
Voltage
Typical
Power
Resistance
RMIN
R1MAX
VMAX,Vdc
36
Pd, W
0.84
Ω
0.059
Ω
0.143
IH=Hold current-maximum current at which the device will not trip at 23℃ still air.
IT=Trip current-minimum current at which the device will always trip at 23℃ still air.
V MAX=Maximum voltage device can withstand without damage at its rated current.
I MAX= Maximum fault current device can withstand without damage at rated voltage (V MAX).
Pd=Typical power dissipated from device when in tripped state in 23℃ still air environment.
RMIN=Minimum device resistance at 23℃.
R1MAX=Maximum device resistance at 23℃, 1 hour after tripping .
Physical specifications:
Lead material: Tin plated copper, 24 AWG.
Soldering characteristics:MIL-STD-202, Method 208E.
Insulating coating:Flame retardant epoxy, meets UL-94V-0 requirement.
4. Production Dimensions (millimeter)
Lead Size :24AWG,
Φ 0.51 mm Diameter
Part
A
Number
Maximum
FRT135-33F
7.4
B
C
D
E
F
Maximum
14.2
Typical
5.1
Minimum
7.6
Maximum
3.0
Typical
1.1
NOTE : Specification subject to change without notice.
5. Thermal Derating Curve
Thermal Derating, FRT 135-33F
Percent of Hold and Trip Current
200%
150%
100%
50%
0%
-40
-20
0
20
40
60
80
Temperature, C
6. Typical Time-To-Trip at 23℃
FRT 135-33F
1000
Time-to-trip (S)
100
10
1
0.1
0.01
0.1
1
10
Fault Current (A)
NOTE : Specification subject to change without notice.
100
7. Material Specification
Lead material:Tin plated copper, 24 AWG.
Soldering characteristics: MIL-STD-202, Method 208E.
Insulating coating:Flame retardant epoxy, meets UL-94V-0 requirement
8. Part Numbering and Marking System
Part Numbering System
Part Marking System
FRT □ □ □- □ □F
F
RoHS Compliant / Lead Free
Voltage rating
F
R T135F
50AB
RT □ □ □ F
RoHS Compliant / Lead Free
Part Identification
Product Family
Current rating
Example
□
□ □ □
Date Code/Lot Number
Warning: -Operation beyond the specified maximum ratings or improper use may result in damage and possible
electrical arcing and/or flame.
-PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent
condition and/or prolonged trip are not anticipated.
- Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device
performance.
NOTE : Specification subject to change without notice.