Radial Leaded PTC Resettable Fuse : FRX 025-90F 1. Summary (a) RoHS Compliant (Lead Free) Product (b) Applications : Telecom and wide variety of electronic equipment. (c) Product Features : Low hold current, Solid state, Radial leaded product ideal for up to 90V (d) Operation Current : 250mA (e) Maximum Voltage : Up to 90V (f) Temperature Range : -40℃ to 85℃ 2. Agency Recognition UL : C-UL: TÜV: E211981 E211981 Pending 3. Electrical Characteristics (23℃) Part Number FRX025-90F Resistance Tolerance RMIN R1MAX Hold Trip Max.Time Maximum Rated Typical Current Current to Trip Current Voltage Power IT,A IH,A 0.25 0.50 at 5xIH 2.5 IMAX,A 40 VMAX,Vdc Pd, W 72/90 ohms 1.25 0.45 ohms 3.00 IH=Hold current-maximum current at which the device will not trip at 23℃ still air. IT=Trip current-minimum current at which the device will always trip at 23℃ still air. V MAX=Maximum voltage device can withstand without damage at its rated current. I MAX= Maximum fault current device can withstand without damage at rated voltage (V MAX). Pd=Typical power dissipated from device when in tripped state in 23℃ still air environment. RMIN=Minimum device resistance at 23℃. R1MAX=Maximum device resistance at 23℃, 1 hour after tripping . Physical specifications: Lead material: Tin plated copper, 24 AWG. Soldering characteristics:MIL-STD-202, Method 208E. Insulating coating:Flame retardant epoxy, meets UL-94V-0 requirement. 4. Production Dimensions (millimeter) FRX 025-90F Lead Size : 24AWG Φ 0.51 mm Diameter Part A B C D E F Number Maximum Maximum Typical Minimum Maximum Typical FRX025-90F 7.4 12.7 5.1 7.6 NOTE : Specification subject to change without notice. 3.1 1.1 5. Thermal Derating Curve Precent of Rated Hold and Trip Current Thermal Derating Curve - FRX 025-90F 200% 150% 100% 50% 0% -40 -20 0 20 40 60 80 Ambient Temperature (C) 6. Typical Time-To-Trip at 23℃ FRX025-90 1000 Time-to-trip (S) 100 10 1 0.1 0.01 0.001 0.1 1 10 Fault current (A) NOTE : Specification subject to change without notice. 100 7. Material Specification Lead material：Tin plated copper, 24 AWG. Soldering characteristics:MIL-STD-202, Method 208E. Insulating coating:Flame retardant epoxy, meets UL-94V-O requirement 8. Part Numbering and Marking System Part Numbering System Part Marking System FRX □ □ □ ─ □ □F F 9 RoHS Compliant / Lead Free Voltage rating F9 9 RX25F 20AB RX 90V □ □F RoHS Compliant / Lead Free Part Identification Product Family Current rating Example □ □ □ □ Date Code/Lot Number Warning: -Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. -PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged trip are not anticipated. - Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance. NOTE : Specification subject to change without notice.