® MBRS230L – MBRS2100L 2.0A LOW VF SURFACE MOUNT SCHOTTKY BARRIER DIODE WON-TOP ELECTRONICS Pb Features Very Low Forward Voltage Epitaxial Construction with Oxide Passivation Guard Ring for Transient and ESD Protection Surge Overload Rating to 50A Peak A Low Power Loss Fast Switching Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes B D F C H G E Mechanical Data Dim Case: SMB/DO-214AA, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Device Code, See Page 3 Weight: 0.093 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 SMB/DO-214AA Min Max A 3.30 3.94 B 4.06 4.70 C 1.91 2.11 D 0.152 0.305 E 5.08 5.59 F 2.13 2.44 G 0.051 0.203 H 0.76 1.27 All Dimensions in mm Maximum Ratings @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Output Current (Note 1) Symbol MBRS230L MBRS240L VRRM VRWM VR 30 40 IO MBRS260L MBRS2100L 60 100 2.0 Unit V A Peak Reverse Leakage Current @ DC Blocking Voltage IRM Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 50 A Thermal Resistance, Junction to Ambient (Note 1) Thermal Resistance, Junction to Lead (Note 1) RθJA RθJL 115 20 °C/W Operating Temperature Range 250 TJ Storage Temperature Range 150 -55 to +125 TSTG µA -55 to +150 -55 to +150 °C °C Electrical Characteristics @TA=25°C unless otherwise specified Characteristic Forward Voltage Test Conditions IF = 1.0A IF = 2.0A IF = 1.0A IF = 2.0A Symbol TA = 25°C VF TA = 125°C MBRS230L, MBR240L MBRS260L MBRS2100L Typ. Max. Typ. Max. Typ. Max. 0.37 0.41 0.25 0.30 0.45 - 0.40 0.47 0.30 0.41 0.52 - 0.53 0.66 0.47 0.56 0.72 - Unit V Note: 1. Mounted on FR-4 PC board with minimum recommended pad area. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® 2.0 MBRS2100L 1.5 1.0 MBRS230L – MBRS260L 0.5 Resistive or Inductive Load 0 15 TA = 25°C 10 MBRS260L MBRS230L MBRS240L 1.0 MBRS2100L 0 30 45 60 75 90 105 120 135 150 TL, LEAD TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 50 Single Half-Sine-Wave JEDEC Method 40 30 20 10 0 100 10 TJ = 125°C TJ = 100°C 1 TJ = 75°C 0.1 0.01 TJ = 25°C MBRS260L 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics www.wontop.com 2 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 TJ = 125°C 10 TJ = 100°C TJ = 75°C 1 0.1 TJ = 25°C 0.01 MBRS230L MBRS240L 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve IR, INSTANTANEOUS REVERSE CURRENT (mA) 1 IR, INSTANTANEOUS REVERSE CURRENT (mA) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) WON-TOP ELECTRONICS 2.5 IR, INSTANTANEOUS REVERSE CURRENT (mA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) MBRS230L – MBRS2100L 100 10 TJ = 125°C TJ = 100°C 1 0.1 TJ = 75°C 0.01 MBRS2100L TJ = 25°C 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® MBRS230L – MBRS2100L WON-TOP ELECTRONICS MARKING INFORMATION RECOMMENDED FOOTPRINT 0.050 MIN (1.27 MIN) B2xxL Cathode B2xxL xx 0.082 MIN (2.10 MIN) = Polarity Band = Device Number = 30, 40, 60 or 100 0.106 MAX (2.69 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 12mm 1.6mm 4mm 12mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 3,000 340 x 337 x 45 6,000 370 x 370 x 420 48,000 14.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 3 ® MBRS230L – MBRS2100L WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity MBRS230L-T3 SMB 3000/Tape & Reel MBRS240L-T3 SMB 3000/Tape & Reel MBRS260L-T3 SMB 3000/Tape & Reel MBRS2100L-T3 SMB 3000/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MBRS230L-T3-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012