4 3 2 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 1 REVISIONS DATE 3/21/12 DESCRIPTION REV B ECN #3925 ENGR R HERRON D C D ITA SHOWN FOR REFERENCE ONLY C 19.05 .75 38.64 1.52 6.35 .25 ITA SHOWN FOR REFERENCE ONLY B 134.14 133.63 5.28 5.26 B 2 CUSTOMER DRAWING A A VIRGINIA PANEL CORPORATION WWW.VPC.COM PROTECTIVE COVER, ITA ICON, 2 MODULE 2 TO INSTALL THE COVER ONTO THE ITA: 1. DISENGAGE THE HANDLE ON THE ITA, TURNING IT IN A COUNTER-CLOCKWISE DIRECTION. 2. PLACE THE CENTER BOSS OF THE COVER ONTO THE CENTER PIN ON THE ITA. 3. ENGAGE THE HANDLE ON THE ITA, TURNING IT CLOCKWISE UNTIL THE COVER IS SEATED FULLY. DIMENSIONS ARE SHOWN AS: 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 [MILLIMETERS] INCHES 2 SIZE C CAGE CODE 18117 SCALE: 1:1 DWG.NO. 410112750 1 410112750 9/20/06 SHEET REV B 1 OF 1