4 3 1 THE INFORMATION CONTAINED HEREIN IS THE EXCLUSIVE PROPERTY OF VIRGINIA PANEL CORPORATION AND IS SUBMITTEDFOR USE BY THE CUSTOMER ONLY. THE DATA SHALL NOT BE DUPLICATED, USED, OR DISCLOSED IN WHOLE OR IN PART FOR ANY PURPOSE OTHER THAN TO MAINTAIN THE EQUIPMENT PROVIDED. CONSULT WITH VIRGINIA PANEL CORPORATION ENGINEERING IF MORE DETAIL IS REQUIRED. DO NOT SCALE DRAWING 5.33 .21 2 38.10 1.50 REVISIONS DATE 11/9/12 DESCRIPTION REV B EC #4326 3.05 .12 D 77.72 3.06 D 63.11 2.48 71.63 2.820 C C 46.99 1.85 4.45 .18 4X RECOMMENDED LOCATION FOR ATTACHING PROTECTIVE COVER ENGR R HERRON 38.10 1.50 8.13 3 .32 MIN. 3.56 .14 2.38 .09 48.77 1.92 CAVITY FOR KEYING KIT, TYP. 2 PLCS. ACCESSORY P/N 310113461 (2 KEYS PER KIT) NOT INCLUDED WITH RECEIVER B B 64.52 2.54 71.63 2.82 4.06 R.160 MAX. TYP. 19.05 .75 RECOMMENDED PANEL CUTOUT [2.79] .11, FOR MOUNTING USE 2-56 OR M2.5 TAPPED HOLE. (SUPPLIED WITH 4X 2-56 SCREWS, LOCK WASHERS AND NUTS) 5.08 .20 A TOLERANCES ARE: .XX = [.25].01 .XXX = [.13].005 UNLESS OTHERWISE SPECIFIED 45.58 1.79 CUSTOMER DRAWING VIRGINIA PANEL CORPORATION 4. PROTECTIVE COVER INCLUDED WITH ASSEMBLY (NOT SHOWN) WWW.VPC.COM MINIMUM DISTANCE SHOULD INCREASE TO 1.32 INCHES WHEN MOUNTING 2 OR MORE ROWS OF 3 STAGGERED RECEIVERS. 2. MATERIALS: FRAME: NICKEL PLATED ALUMINUM ALLOY BUSHING: THERMOPLASTIC MOUNTING HARDWARE: STAINLESS STEEL 1. FOR APPLICATION USE & CARE INFORMATION CONSULT VPC USERS GUIDE @WWW.VPC.COM NOTES: 4 3 A i1 RECEIVER ASSEMBLY DIMENSIONS ARE SHOWN AS: [MILLIMETERS] INCHES 2 SIZE C CAGE CODE 18117 SCALE: 1:1 DWG.NO. 310128101 1 310128101 4/7/09 SHEET REV B 1 OF 1